Commit 1032bce3 authored by Wu Zhangjin's avatar Wu Zhangjin Committed by Ralf Baechle

MIPS: Lemote 2F: Add PCI support

PCI support for the Fuloong 2E and Lemote Loongson 2F family machines is
mostly identical with the exception of CS5536 support.

Rename ops-fuloong2e.c to ops-loongson2.c then add the CS5536 support to
share most of the source code among Loongson machines.
Signed-off-by: default avatarWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com 
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 22c21003
......@@ -28,7 +28,8 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-fuloong2e.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
......
/*
* Copyright (C) 2008 Lemote Technology
* Copyright (C) 2004 ICT CAS
* Author: Li xiaoyu, lixy@ict.ac.cn
*
* Copyright (C) 2007 Lemote, Inc.
* Author: Fuxin Zhang, zhangfx@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <loongson.h>
#include <cs5536/cs5536.h>
#include <cs5536/cs5536_pci.h>
/* PCI interrupt pins
*
* These should not be changed, or you should consider loongson2f interrupt
* register and your pci card dispatch
*/
#define PCIA 4
#define PCIB 5
#define PCIC 6
#define PCID 7
/* all the pci device has the PCIA pin, check the datasheet. */
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
{0, 0, 0, 0, 0}, /* 11: Unused */
{0, 0, 0, 0, 0}, /* 12: Unused */
{0, 0, 0, 0, 0}, /* 13: Unused */
{0, 0, 0, 0, 0}, /* 14: Unused */
{0, 0, 0, 0, 0}, /* 15: Unused */
{0, 0, 0, 0, 0}, /* 16: Unused */
{0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */
{0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */
{0, PCIC, 0, 0, 0}, /* 19: SiI3114 */
{0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */
{0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */
{0, 0, 0, 0, 0}, /* 22: Unused */
{0, 0, 0, 0, 0}, /* 23: Unused */
{0, 0, 0, 0, 0}, /* 24: Unused */
{0, 0, 0, 0, 0}, /* 25: Unused */
{0, 0, 0, 0, 0}, /* 26: Unused */
{0, 0, 0, 0, 0}, /* 27: Unused */
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int virq;
if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536)
&& (PCI_SLOT(dev->devfn) < 32)) {
virq = irq_tab[slot][pin];
printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin,
virq + LOONGSON_IRQ_BASE);
if (virq != 0)
return LOONGSON_IRQ_BASE + virq;
else
return 0;
} else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */
switch (PCI_FUNC(dev->devfn)) {
case 2:
pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
CS5536_IDE_INTR);
return CS5536_IDE_INTR; /* for IDE */
case 3:
pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
CS5536_ACC_INTR);
return CS5536_ACC_INTR; /* for AUDIO */
case 4: /* for OHCI */
case 5: /* for EHCI */
case 6: /* for UDC */
case 7: /* for OTG */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
CS5536_USB_INTR);
return CS5536_USB_INTR;
}
return dev->irq;
} else {
printk(KERN_INFO " strange pci slot number.\n");
return 0;
}
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
/* CS5536 SPEC. fixup */
static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
{
/* the uart1 and uart2 interrupt in PIC is enabled as default */
pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
}
static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
{
/* setting the mutex pin as IDE function */
pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
CS5536_IDE_FLASH_SIGNATURE);
}
static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
{
/* enable the AUDIO interrupt in PIC */
pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
}
static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
{
/* enable the OHCI interrupt in PIC */
/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
}
static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
{
u32 hi, lo;
/* Serial short detect enable */
_rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo);
_wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo);
/* setting the USB2.0 micro frame length */
pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
}
static void __init loongson_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
pci_read_config_dword(pdev, 0xe0, &val);
/* Only 2 port be used */
pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
loongson_cs5536_isa_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC,
loongson_cs5536_ohci_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC,
loongson_cs5536_ehci_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
loongson_cs5536_acc_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE,
loongson_cs5536_ide_fixup);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
loongson_nec_fixup);
......@@ -20,6 +20,11 @@
#include <loongson.h>
#ifdef CONFIG_CS5536
#include <cs5536/cs5536_pci.h>
#include <cs5536/cs5536.h>
#endif
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
......@@ -43,6 +48,29 @@ static int loongson_pcibios_config_access(unsigned char access_type,
int reg = where & ~3;
if (busnum == 0) {
/* board-specific part,currently,only fuloong2f,yeeloong2f
* use CS5536, fuloong2e use via686b, gdium has no
* south bridge
*/
#ifdef CONFIG_CS5536
/* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to
* access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO,
* PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it
* will not go this branch, but the others. so, no calling dead
* loop here.
*/
if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) {
switch (access_type) {
case PCI_ACCESS_READ:
*data = cs5536_pci_conf_read4(function, reg);
break;
case PCI_ACCESS_WRITE:
cs5536_pci_conf_write4(function, reg, *data);
break;
}
return 0;
}
#endif
/* Type 0 configuration for onboard PCI bus */
if (device > MAX_DEV_NUM)
return -1;
......@@ -152,3 +180,29 @@ struct pci_ops loongson_pci_ops = {
.read = loongson_pcibios_read,
.write = loongson_pcibios_write
};
#ifdef CONFIG_CS5536
void _rdmsr(u32 msr, u32 *hi, u32 *lo)
{
struct pci_bus bus = {
.number = PCI_BUS_CS5536
};
u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
}
EXPORT_SYMBOL(_rdmsr);
void _wrmsr(u32 msr, u32 hi, u32 lo)
{
struct pci_bus bus = {
.number = PCI_BUS_CS5536
};
u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
}
EXPORT_SYMBOL(_wrmsr);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment