Blackfin arch: Retire old spi_mmc driver

Turn to use the mmc_spi driver in mainline kernel.
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -1285,7 +1285,6 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDH_BFIN=m
 # CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
 # CONFIG_MMC_SPI is not set
-# CONFIG_SPI_MMC is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -504,13 +504,6 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
-	.bits_per_word = 8,
-};
-#endif
-
 #if defined(CONFIG_PBX)
 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 	.ctl_reg	= 0x4, /* send zero */
@@ -602,26 +595,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_PBX)
 	{
 		.modalias = "fxs-spi",

arch/blackfin/mach-bf533/boards/stamp.c

@@ -216,13 +216,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
-	.bits_per_word = 8,
-};
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
 	.enable_dma = 0,
@@ -265,27 +258,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
 #if defined(CONFIG_PBX)
 	{
 		.modalias = "fxs-spi",

arch/blackfin/mach-bf537/boards/stamp.c

@@ -527,13 +527,6 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 8,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 
@@ -720,26 +713,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",