Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/ppc64: Use preempt_schedule_irq instead of preempt_schedule
  powerpc: Minor cleanup to lib/Kconfig.debug
  powerpc: Minor cleanup to sound/ppc/Kconfig
  powerpc: Minor cleanup to init/Kconfig
  powerpc: Limit memory hotplug support to PPC64 Book-3S machines
  powerpc: Limit hugetlbfs support to PPC64 Book-3S machines
  powerpc: Fix compile errors found by new ppc64e_defconfig
  powerpc: Add a Book-3E 64-bit defconfig
  powerpc/booke: Fix xmon single step on PowerPC Book-E
  powerpc: Align vDSO base address
  powerpc: Fix segment mapping in vdso32
  powerpc/iseries: Remove compiler version dependent hack
  powerpc/perf_events: Fix priority of MSR HV vs PR bits
  powerpc/5200: Update defconfigs
  drivers/serial/mpc52xx_uart.c: Use UPIO_MEM rather than SERIAL_IO_MEM
  powerpc/boot/dts: drop obsolete 'fsl5200-clocking'
  of: Remove nested function
  mpc5200: support for the MAN mpc5200 based board mucmc52
  mpc5200: support for the MAN mpc5200 based board uc101

arch/powerpc/boot/dts/cm5200.dts

@@ -210,7 +210,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {

arch/powerpc/boot/dts/digsy_mtc.dts

@@ -199,7 +199,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 
 			rtc@50 {
 				compatible = "at,24c08";

arch/powerpc/boot/dts/lite5200.dts

@@ -247,7 +247,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -256,7 +255,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";

arch/powerpc/boot/dts/lite5200b.dts

@@ -251,7 +251,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -260,7 +259,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {

arch/powerpc/boot/dts/media5200.dts

@@ -223,7 +223,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -232,7 +231,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {

arch/powerpc/boot/dts/motionpro.dts

@@ -222,7 +222,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 
 			rtc@68 {
 				compatible = "dallas,ds1339";

arch/powerpc/boot/dts/mpc5121ads.dts

@@ -209,7 +209,6 @@
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2c@1720 {
@@ -220,7 +219,6 @@
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2c@1740 {
@@ -231,7 +229,6 @@
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2ccontrol@1760 {

arch/powerpc/boot/dts/mucmc52.dts

+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "manroland,mucmc52";
+	compatible = "manroland,mucmc52";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// GPT 0 in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 { /* PSC1 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 { /* PSC2 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>; 	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>; 	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IDSEL 0x10 */
+				0x8000 0 0 1 &mpc5200_pic 0 3 3
+				0x8000 0 0 2 &mpc5200_pic 0 3 3
+				0x8000 0 0 3 &mpc5200_pic 0 2 3
+				0x8000 0 0 4 &mpc5200_pic 0 1 3
+				>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00020000>;
+			};
+			partition@760000 {
+				label = "red. Env";
+				reg = <0x00760000 0x00020000>;
+			};
+			partition@780000 {
+				label = "reserve";
+				reg = <0x00780000 0x00080000>;
+			};
+		};
+
+		simple100: gpio-controller-100@3,600100 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600100 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple104: gpio-controller-104@3,600104 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600104 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple200: gpio-controller-200@3,600200 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600200 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple201: gpio-controller-201@3,600201 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600201 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple202: gpio-controller-202@3,600202 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600202 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple203: gpio-controller-203@3,600203 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600203 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple204: gpio-controller-204@3,600204 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600204 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple206: gpio-controller-206@3,600206 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600206 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple207: gpio-controller-207@3,600207 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600207 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple20f: gpio-controller-20f@3,60020f {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x0060020f 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};

arch/powerpc/boot/dts/pcm030.dts

@@ -244,7 +244,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -253,7 +252,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;

arch/powerpc/boot/dts/pcm032.dts

@@ -244,7 +244,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -253,7 +252,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;

arch/powerpc/boot/dts/tqm5200.dts

@@ -160,7 +160,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 
 			 rtc@68 {
 				compatible = "dallas,ds1307";

arch/powerpc/boot/dts/uc101.dts

+/*
+ * Manroland uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "manroland,uc101";
+	compatible = "manroland,uc101";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 { /* PSC1 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 { /* PSC2 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2c00 {		/* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			fsl,preserve-clocking;
+			clock-frequency = <400000>;
+
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00010000>;
+			};
+			partition@750000 {
+				label = "red. Env";
+				reg = <0x00750000 0x00010000>;
+			};
+			partition@760000 {
+				label = "reserve";
+				reg = <0x00760000 0x000a0000>;
+			};
+		};
+
+	};
+};

arch/powerpc/kernel/entry_64.S

@@ -658,42 +658,43 @@ do_work:
 	cmpdi	r0,0
 	crandc	eq,cr1*4+eq,eq
 	bne	restore
-	/* here we are preempting the current task */
-1:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	.trace_hardirqs_on
-	/* Note: we just clobbered r10 which used to contain the previous
-	 * MSR before the hard-disabling done by the caller of do_work.
-	 * We don't have that value anymore, but it doesn't matter as
-	 * we will hard-enable unconditionally, we can just reload the
-	 * current MSR into r10
+
+	/* Here we are preempting the current task.
+	 *
+	 * Ensure interrupts are soft-disabled. We also properly mark
+	 * the PACA to reflect the fact that they are hard-disabled
+	 * and trace the change
 	 */
-	mfmsr	r10
-#endif /* CONFIG_TRACE_IRQFLAGS */
-	li	r0,1
+	li	r0,0
 	stb	r0,PACASOFTIRQEN(r13)
 	stb	r0,PACAHARDIRQEN(r13)
+	TRACE_DISABLE_INTS
+
+	/* Call the scheduler with soft IRQs off */
+1:	bl	.preempt_schedule_irq
+
+	/* Hard-disable interrupts again (and update PACA) */
 #ifdef CONFIG_PPC_BOOK3E
-	wrteei	1
-	bl	.preempt_schedule
 	wrteei	0
 #else
-	ori	r10,r10,MSR_EE
-	mtmsrd	r10,1		/* reenable interrupts */
-	bl	.preempt_schedule
 	mfmsr	r10
-	clrrdi	r9,r1,THREAD_SHIFT
-	rldicl	r10,r10,48,1	/* disable interrupts again */
+	rldicl	r10,r10,48,1
 	rotldi	r10,r10,16
 	mtmsrd	r10,1
 #endif /* CONFIG_PPC_BOOK3E */
+	li	r0,0
+	stb	r0,PACAHARDIRQEN(r13)
+
+	/* Re-test flags and eventually loop */
+	clrrdi	r9,r1,THREAD_SHIFT
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
 	b	restore
 
 user_work:
-#endif
+#endif /* CONFIG_PREEMPT */
+
 	/* Enable interrupts */
 #ifdef CONFIG_PPC_BOOK3E
 	wrteei	1

arch/powerpc/kernel/pci_64.c

@@ -97,7 +97,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 	 * to do an appropriate TLB flush here too
 	 */
 	if (bus->self) {
+#ifdef CONFIG_PPC_STD_MMU_64
 		struct resource *res = bus->resource[0];
+#endif
 
 		pr_debug("IO unmapping for PCI-PCI bridge %s\n",
 			 pci_name(bus->self));

arch/powerpc/kernel/perf_event.c

@@ -116,20 +116,23 @@ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
 static inline u32 perf_get_misc_flags(struct pt_regs *regs)
 {
 	unsigned long mmcra = regs->dsisr;
+	unsigned long sihv = MMCRA_SIHV;
+	unsigned long sipr = MMCRA_SIPR;
 
 	if (TRAP(regs) != 0xf00)
 		return 0;	/* not a PMU interrupt */
 
 	if (ppmu->flags & PPMU_ALT_SIPR) {
-		if (mmcra & POWER6_MMCRA_SIHV)
-			return PERF_RECORD_MISC_HYPERVISOR;
-		return (mmcra & POWER6_MMCRA_SIPR) ?
-			PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL;
+		sihv = POWER6_MMCRA_SIHV;
+		sipr = POWER6_MMCRA_SIPR;
 	}
-	if (mmcra & MMCRA_SIHV)
+
+	/* PR has priority over HV, so order below is important */
+	if (mmcra & sipr)
+		return PERF_RECORD_MISC_USER;
+	if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV))
 		return PERF_RECORD_MISC_HYPERVISOR;
-	return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER :
-		PERF_RECORD_MISC_KERNEL;
+	return PERF_RECORD_MISC_KERNEL;
 }
 
 /*

arch/powerpc/kernel/process.c

@@ -1172,7 +1172,7 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 	unsigned long base = mm->brk;
 	unsigned long ret;
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
 	/*
 	 * If we are using 1TB segments and we are allowed to randomise
 	 * the heap, we can put it above 1TB so it is backed by a 1TB

arch/powerpc/kernel/setup_64.c

@@ -57,7 +57,6 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/mmu-hash64.h>
 #include <asm/firmware.h>
 #include <asm/xmon.h>
 #include <asm/udbg.h>

arch/powerpc/kernel/vdso.c

@@ -50,6 +50,9 @@
 /* Max supported size for symbol names */
 #define MAX_SYMNAME	64
 
+/* The alignment of the vDSO */
+#define VDSO_ALIGNMENT	(1 << 16)
+
 extern char vdso32_start, vdso32_end;
 static void *vdso32_kbase = &vdso32_start;
 static unsigned int vdso32_pages;
@@ -231,15 +234,21 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	 * pick a base address for the vDSO in process space. We try to put it
 	 * at vdso_base which is the "natural" base for it, but we might fail
 	 * and end up putting it elsewhere.
+	 * Add enough to the size so that the result can be aligned.
 	 */
 	down_write(&mm->mmap_sem);
 	vdso_base = get_unmapped_area(NULL, vdso_base,
-				      vdso_pages << PAGE_SHIFT, 0, 0);
+				      (vdso_pages << PAGE_SHIFT) +
+				      ((VDSO_ALIGNMENT - 1) & PAGE_MASK),
+				      0, 0);
 	if (IS_ERR_VALUE(vdso_base)) {
 		rc = vdso_base;
 		goto fail_mmapsem;
 	}
 
+	/* Add required alignment. */
+	vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT);
+
 	/*
 	 * Put vDSO base into mm struct. We need to do this before calling
 	 * install_special_mapping or the perf counter mmap tracking code

arch/powerpc/kernel/vdso32/vdso32.lds.S

@@ -25,7 +25,7 @@ SECTIONS
 	. = ALIGN(16);
 	.text		: {
 		*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
-	}
+	}		      	      			:text
 	PROVIDE(__etext = .);
 	PROVIDE(_etext = .);
 	PROVIDE(etext = .);
@@ -56,7 +56,7 @@ SECTIONS
 	.fixup		: { *(.fixup) }
 
 	.dynamic	: { *(.dynamic) }		:text	:dynamic
-	.got		: { *(.got) }
+	.got		: { *(.got) }			:text
 	.plt		: { *(.plt) }
 
 	_end = .;

arch/powerpc/platforms/52xx/mpc5200_simple.c

@@ -51,6 +51,8 @@ static void __init mpc5200_simple_setup_arch(void)
 /* list of the supported boards */
 static char *board[] __initdata = {
 	"intercontrol,digsy-mtc",
+	"manroland,mucmc52",
+	"manroland,uc101",
 	"phytec,pcm030",
 	"phytec,pcm032",
 	"promess,motionpro",

arch/powerpc/platforms/iseries/Makefile

 EXTRA_CFLAGS	+= -mno-minimal-toc
 
-extra-y += dt.o
-
 obj-y += exception.o
-obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \
+obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \
 	hvcall.o proc.o htab.o iommu.o misc.o irq.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_VIOPATH) += viopath.o vio.o
 obj-$(CONFIG_MODULES) += ksyms.o
-
-quiet_cmd_dt_strings = DT_STR  $@
-      cmd_dt_strings = $(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings \
-				$< $@
-
-$(obj)/dt_mod.o:	$(obj)/dt.o
-	$(call if_changed,dt_strings)

arch/powerpc/platforms/iseries/dt.c

@@ -51,11 +51,16 @@
 
 /*
  * These are created by the linker script at the start and end
- * of the section containing all the strings from this file.
+ * of the section containing all the strings marked with the DS macro.
  */
 extern char __dt_strings_start[];
 extern char __dt_strings_end[];
 
+#define DS(s)	({	\
+	static const char __s[] __attribute__((section(".dt_strings"))) = s; \
+	__s;		\
+})
+
 struct iseries_flat_dt {
 	struct boot_param_header header;
 	u64 reserve_map[2];
@@ -64,9 +69,8 @@ struct iseries_flat_dt {
 static void * __initdata dt_data;
 
 /*
- * Putting these strings here keeps them out of the section
- * that we rename to .dt_strings using objcopy and capture
- * for the strings blob of the flattened device tree.
+ * Putting these strings here keeps them out of the .dt_strings section
+ * that we capture for the strings blob of the flattened device tree.
  */
 static char __initdata device_type_cpu[] = "cpu";
 static char __initdata device_type_memory[] = "memory";
@@ -173,7 +177,7 @@ static void __init dt_start_node(struct iseries_flat_dt *dt, const char *name)
 
 #define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE)
 
-static void __init dt_prop(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop(struct iseries_flat_dt *dt, const char *name,
 		const void *data, int len)
 {
 	unsigned long offset;
@@ -191,44 +195,32 @@ static void __init dt_prop(struct iseries_flat_dt *dt, const char *name,
 	/* The actual data. */
 	dt_push_bytes(dt, data, len);
 }
+#define dt_prop(dt, name, data, len)	__dt_prop((dt), DS(name), (data), (len))
 
-static void __init dt_prop_str(struct iseries_flat_dt *dt, const char *name,
-		const char *data)
-{
-	dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */
-}
+#define dt_prop_str(dt, name, data)	\
+	dt_prop((dt), name, (data), strlen((data)) + 1); /* + 1 for NULL */
 
-static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
 		u32 data)
 {
-	dt_prop(dt, name, &data, sizeof(u32));
+	__dt_prop(dt, name, &data, sizeof(u32));
 }
+#define dt_prop_u32(dt, name, data)	__dt_prop_u32((dt), DS(name), (data))
 
-static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt,
-					      const char *name,
-		u64 data)
+static void __init __maybe_unused __dt_prop_u64(struct iseries_flat_dt *dt,
+		const char *name, u64 data)
 {
-	dt_prop(dt, name, &data, sizeof(u64));
+	__dt_prop(dt, name, &data, sizeof(u64));
 }
+#define dt_prop_u64(dt, name, data)	__dt_prop_u64((dt), DS(name), (data))
 
-static void __init dt_prop_u64_list(struct iseries_flat_dt *dt,
-		const char *name, u64 *data, int n)
-{
-	dt_prop(dt, name, data, sizeof(u64) * n);
-}
+#define dt_prop_u64_list(dt, name, data, n)	\
+	dt_prop((dt), name, (data), sizeof(u64) * (n))
 
-static void __init dt_prop_u32_list(struct iseries_flat_dt *dt,
-		const char *name, u32 *data, int n)
-{
-	dt_prop(dt, name, data, sizeof(u32) * n);
-}
+#define dt_prop_u32_list(dt, name, data, n)	\
+	dt_prop((dt), name, (data), sizeof(u32) * (n))
 
-#ifdef notyet
-static void __init dt_prop_empty(struct iseries_flat_dt *dt, const char *name)
-{
-	dt_prop(dt, name, NULL, 0);
-}
-#endif
+#define dt_prop_empty(dt, name)		dt_prop((dt), name, NULL, 0)
 
 static void __init dt_cpus(struct iseries_flat_dt *dt)
 {

arch/powerpc/xmon/xmon.c

@@ -517,6 +517,15 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 	in_xmon = 0;
 #endif
 
+#ifdef CONFIG_BOOKE
+	if (regs->msr & MSR_DE) {
+		bp = at_breakpoint(regs->nip);
+		if (bp != NULL) {
+			regs->nip = (unsigned long) &bp->instr[0];
+			atomic_inc(&bp->ref_count);
+		}
+	}
+#else
 	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
 		bp = at_breakpoint(regs->nip);
 		if (bp != NULL) {
@@ -530,7 +539,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 			}
 		}
 	}
-
+#endif
 	insert_cpu_bpts();
 
 	local_irq_restore(flags);
@@ -894,6 +903,14 @@ cmds(struct pt_regs *excp)
 	}
 }
 
+#ifdef CONFIG_BOOKE
+static int do_step(struct pt_regs *regs)
+{
+	regs->msr |= MSR_DE;
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+	return 1;
+}
+#else
 /*
  * Step a single instruction.
  * Some instructions we emulate, others we execute with MSR_SE set.
@@ -924,6 +941,7 @@ static int do_step(struct pt_regs *regs)
 	regs->msr |= MSR_SE;
 	return 1;
 }
+#endif
 
 static void bootcmds(void)
 {

drivers/of/of_mdio.c

@@ -97,6 +97,12 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 }
 EXPORT_SYMBOL(of_mdiobus_register);
 
+/* Helper function for of_phy_find_device */
+static int of_phy_match(struct device *dev, void *phy_np)
+{
+	return dev_archdata_get_node(&dev->archdata) == phy_np;
+}
+
 /**
  * of_phy_find_device - Give a PHY node, find the phy_device
  * @phy_np: Pointer to the phy's device tree node
@@ -106,15 +112,10 @@ EXPORT_SYMBOL(of_mdiobus_register);
 struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
 	struct device *d;
-	int match(struct device *dev, void *phy_np)
-	{
-		return dev_archdata_get_node(&dev->archdata) == phy_np;
-	}
-
 	if (!phy_np)
 		return NULL;
 
-	d = bus_find_device(&mdio_bus_type, NULL, phy_np, match);
+	d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match);
 	return d ? to_phy_device(d) : NULL;
 }
 EXPORT_SYMBOL(of_phy_find_device);

drivers/serial/mpc52xx_uart.c

@@ -705,7 +705,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
 		return -EINVAL;
 
 	if ((ser->irq != port->irq) ||
-	    (ser->io_type != SERIAL_IO_MEM) ||
+	    (ser->io_type != UPIO_MEM) ||
 	    (ser->baud_base != port->uartclk)  ||
 	    (ser->iomem_base != (void *)port->mapbase) ||
 	    (ser->hub6 != 0))

fs/Kconfig

@@ -135,7 +135,7 @@ config TMPFS_POSIX_ACL
 
 config HUGETLBFS
 	bool "HugeTLB file system support"
-	depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \
+	depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (SUPERH && MMU) || \
 		   (S390 && 64BIT) || SYS_SUPPORTS_HUGETLBFS || BROKEN
 	help
 	  hugetlbfs is a filesystem backing for HugeTLB pages, based on

init/Kconfig

@@ -297,7 +297,7 @@ config AUDIT
 
 config AUDITSYSCALL
 	bool "Enable system-call auditing support"
-	depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH)
+	depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH)
 	default y if SECURITY_SELINUX
 	help
 	  Enable low-overhead system-call auditing infrastructure that

lib/Kconfig.debug

@@ -392,7 +392,7 @@ config DEBUG_KMEMLEAK_TEST
 
 config DEBUG_PREEMPT
 	bool "Debug preemptible kernel"
-	depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)
+	depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT
 	default y
 	help
 	  If you say Y here then the kernel will use a debug variant of the

mm/Kconfig

@@ -129,7 +129,7 @@ config MEMORY_HOTPLUG
 	bool "Allow for memory hot-add"
 	depends on SPARSEMEM || X86_64_ACPI_NUMA
 	depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG
-	depends on (IA64 || X86 || PPC64 || SUPERH || S390)
+	depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
 
 comment "Memory hotplug is currently incompatible with Software Suspend"
 	depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390

sound/ppc/Kconfig

@@ -2,7 +2,7 @@
 
 menuconfig SND_PPC
 	bool "PowerPC sound devices"
-	depends on PPC64 || PPC32
+	depends on PPC
 	default y
 	help
 	  Support for sound devices specific to PowerPC architectures.