Commit 05b8b0fa authored by Roman Zippel's avatar Roman Zippel Committed by David S. Miller

[NET]: Sanitize NET_SCHED protection in /net/sched/Kconfig

On Thu, 17 Nov 2005, David Gómez wrote:

> I found out that if i select NET_CLS_ROUTE4, save my changes and exit
> menuconfig, execute again make menuconfig and go to QoS options, then the new
> available options are visible. So menuconfig has some problem refreshing
> contents :?

No, they were there before too, but you have to go up one level to see 
them.

It's better in 2.6.15-rc1-git5, but the menu structure is still a little 
messed up, the patch below properly indents all menu entries.
Signed-off-by: default avatarRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 38199824
......@@ -40,9 +40,10 @@ config NET_SCHED
The available schedulers are listed in the following questions; you
can say Y to as many as you like. If unsure, say N now.
if NET_SCHED
choice
prompt "Packet scheduler clock source"
depends on NET_SCHED
default NET_SCH_CLK_JIFFIES
---help---
Packet schedulers need a monotonic clock that increments at a static
......@@ -98,11 +99,9 @@ config NET_SCH_CLK_CPU
endchoice
comment "Queueing/Scheduling"
depends on NET_SCHED
config NET_SCH_CBQ
tristate "Class Based Queueing (CBQ)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Class-Based Queueing (CBQ) packet
scheduling algorithm. This algorithm classifies the waiting packets
......@@ -120,7 +119,6 @@ config NET_SCH_CBQ
config NET_SCH_HTB
tristate "Hierarchical Token Bucket (HTB)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Token Buckets (HTB)
packet scheduling algorithm. See
......@@ -135,7 +133,6 @@ config NET_SCH_HTB
config NET_SCH_HFSC
tristate "Hierarchical Fair Service Curve (HFSC)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Fair Service Curve
(HFSC) packet scheduling algorithm.
......@@ -145,7 +142,7 @@ config NET_SCH_HFSC
config NET_SCH_ATM
tristate "ATM Virtual Circuits (ATM)"
depends on NET_SCHED && ATM
depends on ATM
---help---
Say Y here if you want to use the ATM pseudo-scheduler. This
provides a framework for invoking classifiers, which in turn
......@@ -159,7 +156,6 @@ config NET_SCH_ATM
config NET_SCH_PRIO
tristate "Multi Band Priority Queueing (PRIO)"
depends on NET_SCHED
---help---
Say Y here if you want to use an n-band priority queue packet
scheduler.
......@@ -169,7 +165,6 @@ config NET_SCH_PRIO
config NET_SCH_RED
tristate "Random Early Detection (RED)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Random Early Detection (RED)
packet scheduling algorithm.
......@@ -181,7 +176,6 @@ config NET_SCH_RED
config NET_SCH_SFQ
tristate "Stochastic Fairness Queueing (SFQ)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
packet scheduling algorithm .
......@@ -193,7 +187,6 @@ config NET_SCH_SFQ
config NET_SCH_TEQL
tristate "True Link Equalizer (TEQL)"
depends on NET_SCHED
---help---
Say Y here if you want to use the True Link Equalizer (TLE) packet
scheduling algorithm. This queueing discipline allows the combination
......@@ -206,7 +199,6 @@ config NET_SCH_TEQL
config NET_SCH_TBF
tristate "Token Bucket Filter (TBF)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Token Bucket Filter (TBF) packet
scheduling algorithm.
......@@ -218,7 +210,6 @@ config NET_SCH_TBF
config NET_SCH_GRED
tristate "Generic Random Early Detection (GRED)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Generic Random Early Detection
(GRED) packet scheduling algorithm for some of your network devices
......@@ -230,7 +221,6 @@ config NET_SCH_GRED
config NET_SCH_DSMARK
tristate "Differentiated Services marker (DSMARK)"
depends on NET_SCHED
---help---
Say Y if you want to schedule packets according to the
Differentiated Services architecture proposed in RFC 2475.
......@@ -242,7 +232,6 @@ config NET_SCH_DSMARK
config NET_SCH_NETEM
tristate "Network emulator (NETEM)"
depends on NET_SCHED
---help---
Say Y if you want to emulate network delay, loss, and packet
re-ordering. This is often useful to simulate networks when
......@@ -255,7 +244,6 @@ config NET_SCH_NETEM
config NET_SCH_INGRESS
tristate "Ingress Qdisc"
depends on NET_SCHED
---help---
Say Y here if you want to use classifiers for incoming packets.
If unsure, say Y.
......@@ -264,14 +252,12 @@ config NET_SCH_INGRESS
module will be called sch_ingress.
comment "Classification"
depends on NET_SCHED
config NET_CLS
boolean
config NET_CLS_BASIC
tristate "Elementary classification (BASIC)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets using
......@@ -282,7 +268,6 @@ config NET_CLS_BASIC
config NET_CLS_TCINDEX
tristate "Traffic-Control Index (TCINDEX)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets based on
......@@ -294,7 +279,6 @@ config NET_CLS_TCINDEX
config NET_CLS_ROUTE4
tristate "Routing decision (ROUTE)"
depends NET_SCHED
select NET_CLS_ROUTE
select NET_CLS
---help---
......@@ -306,11 +290,9 @@ config NET_CLS_ROUTE4
config NET_CLS_ROUTE
bool
default n
config NET_CLS_FW
tristate "Netfilter mark (FW)"
depends NET_SCHED
select NET_CLS
---help---
If you say Y here, you will be able to classify packets
......@@ -321,7 +303,6 @@ config NET_CLS_FW
config NET_CLS_U32
tristate "Universal 32bit comparisons w/ hashing (U32)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here to be able to classify packetes using a universal
......@@ -345,7 +326,6 @@ config CLS_U32_MARK
config NET_CLS_RSVP
tristate "IPv4 Resource Reservation Protocol (RSVP)"
depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
......@@ -361,7 +341,6 @@ config NET_CLS_RSVP
config NET_CLS_RSVP6
tristate "IPv6 Resource Reservation Protocol (RSVP6)"
depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
......@@ -377,7 +356,6 @@ config NET_CLS_RSVP6
config NET_EMATCH
bool "Extended Matches"
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to use extended matches on top of classifiers
......@@ -456,7 +434,7 @@ config NET_EMATCH_TEXT
config NET_CLS_ACT
bool "Actions"
depends on EXPERIMENTAL && NET_SCHED
depends on EXPERIMENTAL
select NET_ESTIMATOR
---help---
Say Y here if you want to use traffic control actions. Actions
......@@ -539,7 +517,7 @@ config NET_ACT_SIMP
config NET_CLS_POLICE
bool "Traffic Policing (obsolete)"
depends on NET_SCHED && NET_CLS_ACT!=y
depends on NET_CLS_ACT!=y
select NET_ESTIMATOR
---help---
Say Y here if you want to do traffic policing, i.e. strict
......@@ -549,7 +527,7 @@ config NET_CLS_POLICE
config NET_CLS_IND
bool "Incoming device classification"
depends on NET_SCHED && (NET_CLS_U32 || NET_CLS_FW)
depends on NET_CLS_U32 || NET_CLS_FW
---help---
Say Y here to extend the u32 and fw classifier to support
classification based on the incoming device. This option is
......@@ -557,11 +535,12 @@ config NET_CLS_IND
config NET_ESTIMATOR
bool "Rate estimator"
depends on NET_SCHED
---help---
Say Y here to allow using rate estimators to estimate the current
rate-of-flow for network devices, queues, etc. This module is
automaticaly selected if needed but can be selected manually for
statstical purposes.
endif # NET_SCHED
endmenu
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment