Commit 00f42eab authored by Mark Lord's avatar Mark Lord Committed by Jeff Garzik

sata_mv rearrange mv_config_fbs

Rearrange mv_config_fbs() to more closely follow the (corrected) datasheet
recommendations for NCQ and FIS-based switching (FBS).

Also, maintain a port flag to let us know when FBS is enabled.
We will make more use of that flag later in this patch series.
Signed-off-by: default avatarMark Lord <mlord@pobox.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent dd2890f6
...@@ -366,6 +366,7 @@ enum { ...@@ -366,6 +366,7 @@ enum {
/* Port private flags (pp_flags) */ /* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */
}; };
#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
...@@ -1129,26 +1130,31 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) ...@@ -1129,26 +1130,31 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
return ATA_DEFER_PORT; return ATA_DEFER_PORT;
} }
static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs) static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs)
{ {
u32 old_fiscfg, new_fiscfg, old_ltmode, new_ltmode; u32 new_fiscfg, old_fiscfg;
/* u32 new_ltmode, old_ltmode;
* Various bit settings required for operation u32 new_haltcond, old_haltcond;
* in FIS-based switching (fbs) mode on GenIIe:
*/ old_fiscfg = readl(port_mmio + FISCFG_OFS);
old_fiscfg = readl(port_mmio + FISCFG_OFS); old_ltmode = readl(port_mmio + LTMODE_OFS);
old_ltmode = readl(port_mmio + LTMODE_OFS); old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS);
if (enable_fbs) {
new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC; new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR);
new_ltmode = old_ltmode | LTMODE_BIT8; new_ltmode = old_ltmode & ~LTMODE_BIT8;
} else { /* disable fbs */ new_haltcond = old_haltcond | EDMA_ERR_DEV;
new_fiscfg = old_fiscfg & ~FISCFG_SINGLE_SYNC;
new_ltmode = old_ltmode & ~LTMODE_BIT8; if (want_fbs) {
new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC;
new_ltmode = old_ltmode | LTMODE_BIT8;
} }
if (new_fiscfg != old_fiscfg) if (new_fiscfg != old_fiscfg)
writelfl(new_fiscfg, port_mmio + FISCFG_OFS); writelfl(new_fiscfg, port_mmio + FISCFG_OFS);
if (new_ltmode != old_ltmode) if (new_ltmode != old_ltmode)
writelfl(new_ltmode, port_mmio + LTMODE_OFS); writelfl(new_ltmode, port_mmio + LTMODE_OFS);
if (new_haltcond != old_haltcond)
writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS);
} }
static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
...@@ -1175,6 +1181,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) ...@@ -1175,6 +1181,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
/* set up non-NCQ EDMA configuration */ /* set up non-NCQ EDMA configuration */
cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
pp->pp_flags &= ~MV_PP_FLAG_FBS_EN;
if (IS_GEN_I(hpriv)) if (IS_GEN_I(hpriv))
cfg |= (1 << 8); /* enab config burst size mask */ cfg |= (1 << 8); /* enab config burst size mask */
...@@ -1184,19 +1191,30 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) ...@@ -1184,19 +1191,30 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
mv_60x1_errata_sata25(ap, want_ncq); mv_60x1_errata_sata25(ap, want_ncq);
} else if (IS_GEN_IIE(hpriv)) { } else if (IS_GEN_IIE(hpriv)) {
int want_fbs = sata_pmp_attached(ap);
/*
* Possible future enhancement:
*
* The chip can use FBS with non-NCQ, if we allow it,
* But first we need to have the error handling in place
* for this mode (datasheet section 7.3.15.4.2.3).
* So disallow non-NCQ FBS for now.
*/
want_fbs &= want_ncq;
mv_config_fbs(port_mmio, want_ncq, want_fbs);
if (want_fbs) {
pp->pp_flags |= MV_PP_FLAG_FBS_EN;
cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
}
cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
cfg |= (1 << 22); /* enab 4-entry host queue cache */ cfg |= (1 << 22); /* enab 4-entry host queue cache */
if (HAS_PCI(ap->host)) if (HAS_PCI(ap->host))
cfg |= (1 << 18); /* enab early completion */ cfg |= (1 << 18); /* enab early completion */
if (hpriv->hp_flags & MV_HP_CUT_THROUGH) if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
if (want_ncq && sata_pmp_attached(ap)) {
cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
mv_config_fbs(port_mmio, 1);
} else {
mv_config_fbs(port_mmio, 0);
}
} }
if (want_ncq) { if (want_ncq) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment