- 09 Jan, 2006 40 commits
-
-
Chris Pascoe authored
- Added support for VP-3054 (aka DigitalNow DNTV Live! DVB-T Pro!). - This board has a secondary I2C bus and remote control. - Added a new module to handle secondary I2C bus on this board. Signed-off-by:
Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by:
Mauro Carvalho Chehab <mchehab@brturbo.com.br>
-
Michael Krufky authored
- minor whitespace cleanups Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
-
Ricardo Cerqueira authored
- Added new ID for different revision of card #58. It's the same card, but with a tda8275a instead of a tda8275 Signed-off-by:
Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by:
-
Nickolay V. Shmyrev authored
- Add remote. Signed-off-by:
Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by:
-
Patrick Boettcher authored
- Initialize the the dvb-usb-device-pointer in the -init function to NULL, to be sure that a dvb-usb-device was really initialized. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
- As far back as the video4linux cvs repository goes, there is no mention of BTTV_TWINHAN_VP3021. It seems that this was done for the sake of backwards compatability with some older v4l, but this can no longer be necessary due to the v4l/dvb cvs merger, nor should this have ever existed in the upstream kernel. Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
- Removed some unneeded #ifdef's Signed-off-by:
-
Tyler Trafford authored
- In the rare event that a 333MHz i2c firmware load fails after writing some data, this fix makes the driver reset the DL_ADDR registers to the proper values before continuing on with 100MHz transfers. Signed-off-by:
Tyler Trafford <tatrafford@comcast.net> Signed-off-by:
-
Michael Krufky authored
- Corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by:
-
Andrew Morton authored
- Replace del_timer with del_timer_sync Signed-off-by:
-
Christopher Pascoe authored
- Fixes sub-device release for BTTV. Without this, DVB modules can't be reloaded Signed-off-by:
-
Hans Verkuil authored
- Fix 64-bit compile warnings Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Michael H. Schimek authored
- V4L2_(G|S|TRY)_FMT returned incorrect VBI start lines for PAL-M, NTSC-JP, and PAL-60. They also returned an inaccurate VBI offset. - V4L2_(G|S)_FMT and V4L2_TRY_FMT disagreed about the start of VBI capturing in PAL and SECAM second field. Note the start line fixes may break applications using VIDIOCSVBIFMT because this ioctl fails when the driver does not support exactly the requested parameters. - V4L2_TRY_FMT did not clear the reserved field in struct v4l2_vbi_format. - V4L2_(S|TRY)_FMT did not expect very large or small VBI start or count values, returning wrong (but safe) counts due to an overflow. - VIDIOCGVBIFMT confused V4L and V4L2 VBI flags. However this had no effect because the flags have the same value and bttv never sets them. - In v4l_compat_translate_ioctl() the VIDIOC(G|S)VBIFMT code did not expect V4L2 drivers supporting VBI formats besides V4L2_PIX_FMT_GREY. Signed-off-by:
Michael H. Schimek <mschimek@gmx.at> Signed-off-by:
-
Mauro Carvalho Chehab authored
- Debug message changed to be coherent with other modules - added ntsc parameter - parameters moved to the beginning at the file - tuner_status moved to a better position. Signed-off-by: -
Mauro Carvalho Chehab authored
- Now, default control values at cx88_cx8800_ctls are honored - default value for contrast/saturation were changed to be in line with available documentation for the chipset; - Removed some bad coding at set_control; - U/V Saturation now changes proportionally Signed-off-by:
-
Michael Krufky authored
- "Philips 1236D ATSC/NTSC dual in" - fix typo. Signed-off-by:
-
Ricardo Cerqueira authored
- Merged ir-kbd-gpio into bttv as bttv-input, for consistency with other input modules Signed-off-by:
-
Steven Toth authored
Updates to the tveeprom eeprom checking Signed-of-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
- Replaces MAX()/MIN() by kernel.h max()/min() macros Signed-off-by: -
Alex Woods authored
- Collection of patches from Peter Beutner addressing: - add symbolrates to the DVB-S frontend description - fix capability flags in DVB-S frontend describtion - remove some void casts - disable zig-zag scanning as it makes no sense for DVB-T - set sensible min_delay value - return an error for requested filter types the driver can't handle Signed-off-by:
Peter Beutner <p.beutner@gmx.net> Signed-off-by:
Alex Woods <linux-dvb@giblets.org> Signed-off-by:
-
Deti Fliegl authored
- USB hot unplug Oops fix. Signed-off-by:
Deti Fliegl <deti@fliegl.de> Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Jesper Juhl authored
- Here's a small patch to decrease the number of pointer derefs in drivers/media/dvb/b2c2/flexcop-fe-tuner.c Benefits of the patch: - Fewer pointer dereferences should make the code slightly faster. - Size of generated code is smaller - Improved readability Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
- digitv_ctrl_msg() if (wo) test is reversed. fixed. - usb timeout is in Hz, not in jiffies. - NULL replaced by 0 to be coherent. - removed uneeded headers. Signed-off-by: -
Steven Toth authored
- Cleanup timeout handling in cx24123_pll_writereg(), and use a reasonable value for the timeout. Signed-off-by:
-
Stephen Williams authored
- Make FE_READ_UNCORRECTED_BLOCKS reset the count after each call, thus returning a momentary value like all other demods do, instead of an absolute, ever increasing count. Signed-off-by:
Stephen Williams <stephen.williams@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
- This patch makes kernel in sync with v4l subsystem tree. - some lines reordered to be sync. - some reduntant codes removed. Signed-off-by: -
Mauro Carvalho Chehab authored
- some uneeded #if were introduced by a previous patch. this patch removes these. Signed-off-by: -
Mauro Carvalho Chehab authored
- include reorder to be in sync with V4L tree Signed-off-by: -
George Gazurkoff authored
- Enable remote control on AVERTV STUDIO 303 - This patch adapted from a patch found on a website posted by an anonymous user. Thanks to original anonymous author for creating this patch. Tested successfully by George Gazurkoff. Signed-off-by:
George Gazurkoff <gazurkoff@gmail.com> Signed-off-by:
-
Hans Verkuil authored
- Fix incorrect matching of TV standards leading to incorrect IFPCoff values. Signed-off-by:
-
Hans Verkuil authored
- Set the tuner takeover point to 0x10 for NTSC/radio and 0x14 for PAL/SECAM. - Allow override through TDA9887_SET_CONFIG - PAL-N belongs with PAL-BG as does PAL-H. PAL-Nc belongs to PAL-M - Add SECAM-BGH - Set video freq to cVideoIF_38_90 for DK standards. - Add cTunerGainLow to radio, change deemphasis to 75 for mono. - Add ntsc module param for 'M' and 'J' (Japanese) standards. - Fix module handling for 2.4. - Now able to select all standards through pal/secam/ntsc module options Signed-off-by:
-
Hans Verkuil authored
- Add missing VIDEO_ADV_DEBUG config option. Signed-off-by:
-
Steven Toth authored
- This patch adds eeprom awareness for the Roslyn. In effect, the blackbird will query the tuner V4L2_STD_xxxx definitions to determine whether it's connected to a NTSC or PAL tuner. Based on that, various default values will change for blackbird encoding. - Fixes back panel SVIDEO/COMPOSITE with audio, work properly. - Fixes a problem with lip sync issues, due to bad framerate vs audio rate assumptions. - Fixed a problem with the GPIO configuration in cx88-cards. - Removed the comments in cx88-cards that made no sense. Signed-off-by:
-
Otavio Salvador authored
This patch replace all calls to pci_module_init, that's deprecated and will be removed in future, with pci_register_driver that should be the used function now. Signed-off-by:
Otavio Salvador <otavio@debian.org> Signed-off-by:
-
Steven Toth authored
- Cleaned up the structure to use the V4L2_STD_xxx definitions rather than a one off set of hardcoded values - which could change in the future. Signed-off-by:
-
Hans Verkuil authored
- Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Removes obsoleted stuff - Reorders some stuff to make it clearer to read - Clears some debug messages Signed-off-by: -
Hans Verkuil authored
- Mark tda9887.c status log values as hexadecimal (add 0x prefix). Add VIDIOC_LOG_STATUS support to tuner-core.c. Signed-off-by:
-
Hans Verkuil authored
- Fix compile error (missing '}') in em28xx-video.c. Remove dead code and volume scaling from msp3400.c. Volume scaling does not belong there, it should be done in the driver for the card that uses the msp3400 if needed, not in the msp3400.c source. The volume scaling code gave problems with the ivtv driver which does not need to do any scaling. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Controls now come from video and audio decoder driver for msp3400 and tvp5150. - Added audio and sound controls as provided by msp3400 and tvp5150. Signed-off-by:
-
