- 01 Oct, 2007 1 commit
-
-
Randy Dunlap authored
Fix missing symbols in libertas USB driver when it is modular and rest of libertas is built-in. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 25 Sep, 2007 3 commits
-
-
Linus Torvalds authored
Getting there...
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] SMTC: Make ack_bad_irq() safe with no IM backstop.
-
git://lost.foo-projects.org/~dwillia2/git/iopLinus Torvalds authored
* 'async-tx-fixes-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: raid5: fix 2 bugs in ops_complete_biofill async_tx: fix dma_wait_for_async_tx async_tx: usage documentation and developer notes (v2)
-
- 24 Sep, 2007 6 commits
-
-
Dan Williams authored
1/ ops_complete_biofill tried to avoid calling handle_stripe since all the state necessary to return read completions is available. However the process of determining whether more read requests are pending requires locking the stripe (to block add_stripe_bio from updating dev->toead). ops_complete_biofill can run in tasklet context, so rather than upgrading all the stripe locks from spin_lock to spin_lock_bh this patch just unconditionally reschedules handle_stripe after completing the read request. 2/ ops_complete_biofill needlessly qualified processing R5_Wantfill with dev->toread. The result being that the 'biofill' pending bit is cleared before handling the pending read-completions on dev->read. R5_Wantfill can be unconditionally handled because the 'biofill' pending bit prevents new R5_Wantfill requests from being seen by ops_run_biofill and ops_complete_biofill. Found-by: Yuri Tikhonov <yur@emcraft.com> [neilb@suse.de: simpler fix for bug 1 than moving code] Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Fix dma_wait_for_async_tx to not loop forever in the case where a dependency chain is longer than two entries. This condition will not happen with current in-kernel drivers, but fix it for future drivers. Found-by: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Changes in v2: * cleanups from Randy and Shannon Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Ralf Baechle authored
Issue reported and original patch by Kevin Kissel, cleaner (imho) implementation by me. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Takashi Iwai authored
Use seq_file for the proc file read/write of snd-page-alloc module. This automatically fixes bugs in the old proc code. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Fix data corruption triggered by wrong headroom marking order
-
- 23 Sep, 2007 4 commits
-
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: [PATCH] missing null termination in power supply uevent
-
Jack Morgenstein authored
This is an addendum to commit 0e6e7416 ("IB/mlx4: Handle new FW requirement for send request prefetching"). We also need to handle prefetch marking properly for S/G segments, or else the HCA may end up processing S/G segments that are not fully written and end up sending the wrong data. This can actually cause data corruption in practice, especially on systems with relatively slow CPUs (where the HCA is more likely to prefetch while the CPU is in the middle of writing a work request into memory). We write S/G segments in reverse order into the WQE, in order to guarantee that the first dword of all cachelines containing S/G segments is written last (overwriting the headroom invalidation pattern). The entire cacheline will thus contain valid data when the invalidation pattern is overwritten. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Thomas Gleixner authored
In a desparate attempt to fix the suspend/resume problem on Andrews VAIO I added a workaround which enforced the broadcast of the oneshot timer on resume. This was actually resolving the problem on the VAIO but was just a stupid workaround, which was not tackling the root cause: the assignement of lower idle C-States in the ACPI processor_idle code. The cpuidle patches, which utilize the dynamic tick feature and go faster into deeper C-states exposed the problem again. The correct solution is the previous patch, which prevents lower C-states across the suspend/resume. Remove the enforcement code, including the conditional broadcast timer arming, which helped to pamper over the real problem for quite a time. The oneshot broadcast flag for the cpu, which runs the resume code can never be set at the time when this code is executed. It only gets set, when the CPU is entering a lower idle C-State. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
device_suspend() calls ACPI suspend functions, which seems to have undesired side effects on lower idle C-states. It took me some time to realize that especially the VAIO BIOSes (both Andrews jinxed UP and my elfstruck SMP one) show this effect. I'm quite sure that other bug reports against suspend/resume about turning the system into a brick have the same root cause. After fishing in the dark for quite some time, I realized that removing the ACPI processor module before suspend (this removes the lower C-state functionality) made the problem disappear. Interestingly enough the propability of having a bricked box is influenced by various factors (interrupts, size of the ram image, ...). Even adding a bunch of printks in the wrong places made the problem go away. The previous periodic tick implementation simply pampered over the problem, which explains why the dyntick / clockevents changes made this more prominent. We avoid complex functionality during the boot process and we have to do the same during suspend/resume. It is a similar scenario and equaly fragile. Add suspend / resume functions to the ACPI processor code and disable the lower idle C-states across suspend/resume. Fall back to the default idle implementation (halt) instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Sep, 2007 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: suspend: consolidate handling of Sx states addendum ACPI: suspend: consolidate handling of Sx states. ACPI: video: remove dmesg spam ACPI: video: _DOS=0 by default to prevent hotkey hang
-
git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds authored
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] fix valid but harmless sparse warning [XFS] fix filestreams on 32-bit boxes
-
Avi Kivity authored
What guest drivers? Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Len Brown authored
-
Len Brown authored
-
Frans Pop authored
Make the S0 state be always reported as supported Signed-off: Frans Pop <elendil@planet.nl> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
-
- 21 Sep, 2007 8 commits
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4569/1: ep93xx_gpio_irq_type(): fix spurious enumeration offset for FGPIO handling [ARM] 4568/1: fix l2x0 cache invalidate handling of unaligned addresses
-
Linus Torvalds authored
This reverts commit 34feb2c8. Suresh Siddha points out that this one breaks the fundamental requirement that you cannot free page table pages before the TLB caches are flushed. The quicklists do not give the same kinds of guarantees that the mmu_gather structure does, at least not in NUMA configurations. Requested-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] BCM1480: include <linux/init.h>. [MIPS] BCM1480: Export zbbus_mhz.
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Symbol is required by the ZBus profiler. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Pack vote message and response structures ocfs2: Don't double set write parameters ocfs2: Fix pos/len passed to ocfs2_write_cluster ocfs2: Allow smaller allocations during large writes
-
Andi Kleen authored
Strictly it's only needed for eax. It actually does a little more than strictly needed -- the other registers are already zero extended. Also remove the now unnecessary and non functional compat task check in ptrace. This is CVE-2007-4573 Found by Wojciech Purczynski Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Starikovskiy authored
Recent changes to sleep initialization in ACPI dropped reporting of supported Sx states above S3. Fix that and also move S5 init into same file as other Sx. The only functional change is adding printk() for S4 and S5 cases. Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
-
- 20 Sep, 2007 12 commits
-
-
Sunil Mushran authored
The ocfs2_vote_msg and ocfs2_response_msg structs needed to be packed to ensure similar sizeofs in 32-bit and 64-bit arches. Without this, we had inadvertantly broken 32/64 bit cross mounts. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
The target page offsets were being incorrectly set a second time in ocfs2_prepare_page_for_write(), which was causing problems on a 16k page size kernel. Additionally, ocfs2_write_failure() was incorrectly using those parameters instead of the parameters for the individual page being cleaned up. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
This was broken for file systems whose cluster size is greater than page size. Pos needs to be incremented as we loop through the descriptors, and len needs to be capped to the size of a single cluster. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
The ocfs2 write code loops through a page much like the block code, except that ocfs2 allocation units can be any size, including larger than page size. Typically it's equal to or larger than page size - most kernels run 4k pages, the minimum ocfs2 allocation (cluster) size. Some changes introduced during 2.6.23 changed the way writes to pages are handled, and inadvertantly broke support for > 4k page size. Instead of just writing one cluster at a time, we now handle the whole page in one pass. This means that multiple (small) seperate allocations might happen in the same pass. The allocation code howver typically optimizes by getting the maximum which was reserved. This triggered a BUG_ON in the extend code where it'd ask for a single bit (for one part of a > 4k page) and get back more than it asked for. Fix this by providing a variant of the high level allocation function which allows the caller to specify a maximum. The traditional function remains and just calls the new one with a maximum determined from the initial reservation. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Stephen Hemminger authored
Need to null terminate environment. Found by inspection while looking for similar problems to platform uevent bug Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] ahci: add ATI SB800 PCI IDs libata-sff: Fix documentation libata: Update the blacklist with a few more devices
-
Davide Libenzi authored
This simplifies signalfd code, by avoiding it to remain attached to the sighand during its lifetime. In this way, the signalfd remain attached to the sighand only during poll(2) (and select and epoll) and read(2). This also allows to remove all the custom "tsk == current" checks in kernel/signal.c, since dequeue_signal() will only be called by "current". I think this is also what Ben was suggesting time ago. The external effect of this, is that a thread can extract only its own private signals and the group ones. I think this is an acceptable behaviour, in that those are the signals the thread would be able to fetch w/out signalfd. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Wolfgang Walter authored
we upgraded the kernel of a nfs-server from 2.6.17.11 to 2.6.22.6. Since then we get the message lockd: too many open TCP sockets, consider increasing the number of nfsd threads lockd: last TCP connect from ^\\236^\É^D These random characters in the second line are caused by a bug in svc_tcp_accept. (Note: there are two previous __svc_print_addr(sin, buf, sizeof(buf)) calls in this function, either of which would initialize buf correctly; but both are inside "if"'s and are not necessarily executed. This is less obvious in the second case, which is inside a dprintk(), which is a macro which expands to an if statement.) Signed-off-by: Wolfgang Walter <wolfgang.walter@studentenwerk.mhn.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
henry su authored
ATI/AMD SB800 shares some device IDs with SB700, and SB800 adds two more device IDs:0x4394,0x4395. Signed-off-by: henry su <henry.su.ati@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Alan Cox authored
Code moved to ioread/iowrite but the comment didn't Also note a posting issue Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BNX2]: Add PHY workaround for 5709 A1. [PPP] L2TP: Fix skb handling in pppol2tp_xmit [PPP] L2TP: Fix skb handling in pppol2tp_recv_core [PPP] L2TP: Disallow non-UDP datagram sockets [PPP] pppoe: Fix double-free on skb after transmit failure [PKT_SCHED]: Fix 'SFQ qdisc crashes with limit of 2 packets' [NETFILTER]: MAINTAINERS update [NETFILTER]: nfnetlink_log: fix sending of multipart messages
-