- 26 Jun, 2006 40 commits
-
-
Dennis Munsie authored
Adds 1366x768 @ 60Hz to drivers/video/modedb.c. Signed-off-by:
Dennis Munsie <dmunsie@cecropia.com> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Antonino A. Daplas authored
Add support for Geforce 6100 and related chipsets (PCI device id 0x024x) Signed-off-by:
-
Antonino A. Daplas authored
- make firmware edid independent from framebuffer (No need to choose framebuffer just to disable this option - enable this option in X86_64 - check if VBE/DDC function is implemented before calling actual function Signed-off-by:
-
Antonino A. Daplas authored
Whitespace cleanup Signed-off-by:
-
Antonino A. Daplas authored
A static pseudocolor visual with depth less than 4 does exist, so let's not accidentally upscale the depth with this configuration Signed-off-by:
-
Antonino A. Daplas authored
Update platform code to dynamically allocate the platform device Signed-off-by:
-
Antonino A. Daplas authored
Update platform code to dynamically allocate the platform device Signed-off-by:
-
Antonino A. Daplas authored
Update platform code to dynamically allocate the platform device Signed-off-by:
-
Antonino A. Daplas authored
Update platform code to dynamically allocate the platform device Signed-off-by:
-
Antonino A. Daplas authored
Set the appropriate acceleration flags so fbcon can choose the optimal scrolling mode. Signed-off-by:
-
Antonino A. Daplas authored
The drawing functions of atyfb is unecessary syncing the GPU which is affecting performance. Remove the calls, any direct access by fbcon to the framebuffer will always be preceeded by a call to atyfb_sync(). Signed-off-by:
-
Antonino A. Daplas authored
Fix image and color handling in atyfb_cursor() - In the 2-bit scheme of the cursor image, just set the first bit to be always zero (turn off transparency and/or XOR), and just do the masking manually - The cursor color is converted into 32-bit RGBA8888 using struct fb_cmap. Each component in the cmap is u16 in size, so mask the upper 8 bits. Signed-off-by:
-
Antonino A. Daplas authored
nVidia is churning out chipsets like there's no tomorrow. And even though the pci_device_id table now has numerous entries, it is still not guaranteed that all supported devices are included or will be included. Fortunately, nvidiafb has chipset detection logic built in. So, change the contents of the pci_device_id table so it will capture all nVidia devices of the display class. Unsupported chipsets will then be filtered out by nvidiafb's detection logic. Signed-off-by:
-
Antonino A. Daplas authored
The EDID block should specify the display's operating limits (vertical and horizontal sync ranges, and maximum dot clock). If not given by the EDID block, the ranges are extrapolated from the modelist. However, the computation used is only a rough approximation, and the resulting values may not reflect the actual capability of the display. This problem is frequently encountered when the EDID block has a single entry, the single mode entry will fail validation. To prevent this, calculate the values based on the same method used in fb_validate_mode(). Signed-off-by:
-
Adrian Bunk authored
Remove unneeded duplicate #include's of the same header file. In the case of fbmon.c linux/pci.h is now #include'd unconditional, but this should be safe. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
We had three (sic) VIDEO_SELECT options: - two in drivers/video/Kconfig - one in drivers/video/console/Kconfig This patch removes the two options in drivers/video/Kconfig and also removes the unneeded usage in drivers/video/sis/sis_main.c . Signed-off-by:
-
Richard Purdie authored
Add backlight intensity control to the LOCOMO lcd/backlight driver using the backlight class and add basic power management support. This is a reimplementation and improvement of patches by John Lenz and Pavel Machek Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Antonino A. Daplas authored
Reported by: Rich (Bugzilla Bug 6417) "if savage driver is used in x.org together with savagefb, it results in seriously garbled and distorted screen - coupled with severe slowdowns." This bug is the result of Xorg unable to handle savagefb altering the hardware which results in X failing to start properly and/or failed console switching. Add savagefb_state_save and savagefb_state_restore. These hooks will only save and restore the extended VGA registers. Standard VGA registers will be left alone. This is enough to make savagefb play nicely with the latest Xorg savage driver, and perhaps with savage DRI. (Transient screen artifacts may appear before X loads and during console switches). (Unfortunately, blanking the screen also leaves Xorg in a blanked state, so I have to unblank the screen before Xorg loads. So I doubt if the transient screen artifacts will be completely invisible but hopefully it will only be for a shorter duration (not much).) [akpm@osdl.org: cleanups] Signed-off-by:
-
Antonino A. Daplas authored
Allocate space for 2 register states: 'current' for the current state of the hardware, and 'saved', to be used for restoring the hardware to a sane state. This is in preparation for the addition of state save and restore hooks to make savagefb work together with the latest Xorg savage driver. Signed-off-by:
-
Tobias Oed authored
Signed-off-by:
Tobias Oed <tobiasoed@hotmail.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Tobias Oed authored
The driver pdc202xx_old requires CONFIG_BLK_DEV_IDEDMA, so it's always defined Signed-off-by:
-
Ingo Molnar authored
Michal Piotrowski reported the following validator assert: hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdd: set_drive_speed_status: error=0xb4 { AbortedCommand LastFailedSense=0x0b } ============================ [ BUG: illegal lock usage! ] ---------------------------- illegal {in-hardirq-W} -> {hardirq-on-W} usage. hdparm/1821 [HC0[0]:SC0[0]:HE1:SE1] takes: (ide_lock){++..}, at: [<c0268388>] ide_dump_opcode+0x13/0x9b [...] stack backtrace: [<c0104513>] show_trace+0x1b/0x20 [<c01045f1>] dump_stack+0x1f/0x24 [<c013976c>] print_usage_bug+0x1a5/0x1b1 [<c0139e90>] mark_lock+0x2ca/0x4f7 [<c013aa96>] __lockdep_acquire+0x47e/0xaa4 [<c013b536>] lockdep_acquire+0x67/0x7f [<c030552d>] _spin_lock+0x24/0x32 [<c0268388>] ide_dump_opcode+0x13/0x9b [<c02688b6>] ide_dump_status+0x4a6/0x4cc [<c0267ae6>] ide_config_drive_speed+0x32a/0x33a [<c0262dc5>] piix_tune_chipset+0x2ed/0x2f8 [<c0262e31>] piix_config_drive_xfer_rate+0x61/0xb5 [<c0263a82>] set_using_dma+0x2f/0x60 [<c0263bee>] ide_write_setting+0x4a/0xc3 [<c02647ca>] generic_ide_ioctl+0x8a/0x47f [<f886003a>] idecd_ioctl+0xfd/0x133 [ide_cd] [<c01f1fff>] blkdev_driver_ioctl+0x4b/0x5f [<c01f2783>] blkdev_ioctl+0x770/0x7bd [<c017dc0d>] block_ioctl+0x1f/0x21 [<c0189353>] do_ioctl+0x27/0x6e [<c0189604>] vfs_ioctl+0x26a/0x280 [<c0189667>] sys_ioctl+0x4d/0x7e [<c0305ed2>] sysenter_past_esp+0x63/0xa1 in ide_dump_opcode() takes the ide_lock in an irq-unsafe manner, i.e. this function expects to be called with irqs disabled. But ide_dump_ata[pi]_status() doesnt do that - it enables interrupts specifically. That is a no-no - what guarantees that another IDE port couldnt generate an IDE interrupt while we are dumping this error? The fix is to turn the irq-enabling in these functions into irq-disabling. Signed-off-by:Ingo Molnar <mingo@elte.hu> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Sergei Shtylyov authored
Remove the busproc from pdc202xx_old.c because: - it handles the obsolete HDIO_TRISTATE_HWIF ioctl instead of the modern HDIO_SET_BUSSTATE, so treats its argument wrong; - I don't think that tristating both channels is good idea (probably can't be done otherwise since there seems to be only single bit controlling this). Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by:
-
Sergei Shtylyov authored
The function ide_timing_compute() fails to *actually* take drive's specified minimum PIO/DMA cycle times into account -- when doing this, it calls ide_timing_merge() on the 'struct ide_timing' argument which contains garbage at the moment, and then ultimately destroys the read cycle time by quantizing the ide_timing[] entry, instead of copying from that entry to the argument structure, and only then doing a merge/quantize. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by:
-
Al Boldi authored
During an STR resume cycle, the ide master disk times-out when there is also a slave present (especially CD). Increasing the timeout in ide-io from 10,000 to 100,000 fixes this problem. Acked-by:
-
Alan Cox authored
This bit us a few kernels ago, and for some reason never made it's way upstream. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=144743 Kernel panic - not syncing: drivers/ide/pci/piix.c:231: spin_lock(drivers/ide/ide.c:c03cef28) already locked by driver/ide/ide-iops.c/1153. Signed-off-by:
Dave Jones <davej@redhat.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Dave Jones <davej@redhat.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Tobias Oed authored
Remove a call to hwif->tuneproc() on the error path of config_chipset_for_dma(), as its single caller (pdc202xx_config_drive_xfer_rate()) will do the call in that case. Signed-off-by:
-
Oleg Nesterov authored
After the previous patch SIGNAL_GROUP_EXIT implies a pending SIGKILL, we can remove this check from copy_process() because we already checked !signal_pending(). Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
This patch optimizes zap_threads() for the case when there are no ->mm users except the current's thread group. In that case we can avoid 'for_each_process()' loop. It also adds a useful invariant: SIGNAL_GROUP_EXIT (if checked under ->siglock) always implies that all threads (except may be current) have pending SIGKILL. Signed-off-by:
-
Oleg Nesterov authored
This is a preparation for the next patch. No functional changes. Basically, this patch moves '->flags & SIGNAL_GROUP_EXIT' check into zap_threads(), and 'complete(vfork_done)' into coredump_wait outside of ->mmap_sem protected area. Signed-off-by:
-
Oleg Nesterov authored
This patch removes tasklist_lock from zap_threads(). This is safe wrt: do_exit: The caller holds mm->mmap_sem. This means that task which shares the same ->mm can't pass exit_mm(), so it can't be unhashed from init_task.tasks or ->thread_group lists. fork: None of sub-threads can fork after zap_process(leader). All processes which were created before this point should be visible to zap_threads() because copy_process() adds the new process to the tail of init_task.tasks list, and ->siglock lock/unlock provides a memory barrier. de_thread: It does list_replace_rcu(&leader->tasks, ¤t->tasks). So zap_threads() will see either old or new leader, it does not matter. However, it can change p->sighand, so we should use lock_task_sighand() in zap_process(). Signed-off-by:
-
Oleg Nesterov authored
With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to the thread group. This means that a TASK_TRACED task 1. Will be awakened by signal_wake_up(1) 2. Can't sleep again via ptrace_notify() 3. Can't go to do_signal_stop() after return from ptrace_stop() in get_signal_to_deliver() So we can remove all ptrace related stuff from coredump path. Signed-off-by:
-
Oleg Nesterov authored
With this patch a thread group is killed atomically under ->siglock. This is faster because we can use sigaddset() instead of force_sig_info() and this is used in further patches. Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
zap_threads() iterates over all threads to find those ones which share current->mm. All threads in the thread group share the same ->mm, so we can skip entire thread group if it has another ->mm. This patch shifts the killing of thread group into the newly added zap_process() function. This looks as unnecessary complication, but it is used in further patches. Signed-off-by:
-
Oleg Nesterov authored
We should keep the value of old_leader->tasks.next in de_thread, otherwise we can't do for_each_process/do_each_thread without tasklist_lock held. Signed-off-by:
-
Eric Paris authored
Below is a patch to add a new /proc/self/attr/sockcreate A process may write a context into this interface and all subsequent sockets created will be labeled with that context. This is the same idea as the fscreate interface where a process can specify the label of a file about to be created. At this time one envisioned user of this will be xinetd. It will be able to better label sockets for the actual services. At this time all sockets take the label of the creating process, so all xinitd sockets would just be labeled the same. I tested this by creating a tcp sender and listener. The sender was able to write to this new proc file and then create sockets with the specified label. I am able to be sure the new label was used since the avc denial messages kicked out by the kernel included both the new security permission setsockcreate and all the socket denials were for the new label, not the label of the running process. Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Oleg Nesterov authored
Try to make next_tid() a bit more readable and deletes unnecessary "pid_alive(pos)" check. Signed-off-by:
-
Oleg Nesterov authored
first_tid: /* If nr exceeds the number of threads there is nothing todo */ if (nr) { if (nr >= get_nr_threads(leader)) goto done; } This is not reliable: sub-threads can exit after this check, so the 'for' loop below can overlap and proc_task_readdir() can return an already filldir'ed dirents. for (; pos && pid_alive(pos); pos = next_thread(pos)) { if (--nr > 0) continue; Off-by-one error, will return 'leader' when nr == 1. This patch tries to fix these problems and simplify the code. Signed-off-by: -
Eric W. Biederman authored
This is just like my previous removal of tasklist_lock from first_tgid, and next_tgid. It simply had to wait until it was rcu safe to walk the thread list. This should be the last instance of the tasklist_lock in proc. So user processes should not be able to influence the tasklist lock hold times. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
In process of getting proc_fd_access_allowed to work it has developed a few warts. In particular the special case that always allows introspection and the special case to allow inspection of kernel threads. The special case for introspection is needed for /proc/self/mem. The special case for kernel threads really should be overridable by security modules. So consolidate these checks into ptrace.c:may_attach(). The check to always allow introspection is trivial. The check to allow access to kernel threads, and zombies is a little trickier. mem_read and mem_write already verify an mm exists so it isn't needed twice. proc_fd_access_allowed only doesn't want a check to verify task->mm exits, s it prevents all access to kernel threads. So just move the task->mm check into ptrace_attach where it is needed for practical reasons. I did a quick audit and none of the security modules in the kernel seem to care if they are passed a task without an mm into security_ptrace. So the above move should be safe and it allows security modules to come up with more restrictive policy. Signed-off-by:
-
