- 24 Jun, 2005 40 commits
-
-
Mauro Carvalho Chehab authored
This patch is necessary to correct I2C detect after normal_i2c_range removal in gregkh-i2c-i2c-address_range_removal.patch. Signed-off-by:
Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Mauro Carvalho Chehab authored
This patch adds support for various SAA7134 cards and brings some fixes. Signed-off-by:
Fabrice Aeschbacher <fabrice.aeschbacher@laposte.net> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de>. Signed-off-by:
Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Tuner improvements and additions. TEA5767 FM tuner added. Several small fixes. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch adds support for various CX88 cards and allows specifying card addresses. Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
cybercide@f2s.com <cybercide@f2s.com> Signed-off-by:
Catalin Climov <catalin@climov.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by:
Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by:
-
Michael Krufky authored
Add support for tuner#60: Thomson DDT 7611 (ATSC/NTSC) Change tuner in card#28 (DViCO FusionHDTV3 Gold-T) from tuner=52 (Tuner Thomson DDT 7610) to tuner=60 (Tuner Thomson DDT 7611) Signed-off-by:
-
Michael Krufky authored
Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is printed on the card. This fix corrects the error in all places, and corrects the tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation. This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's patch "Add support for PixelView Ultra Pro in v4l" (because of the change from card=27 to card=28) Signed-off-by:
-
Manuel Capinha authored
The following patch adds support for the PixelView Ultra Pro video capture card in v4l. - It removes the remote control key definitions from ir-kbd-gpio.c and moves them to ir-common.c so that they can be shared between bt878 and cx88 based cards. - The patch also moves the FUSIONHDTV_3_GOLD_Q card from number 27 to 28 to regain compatibility with the V4L cvs. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch synchronizes documentation from V4L CVS with current kernel release. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch fixes PAL-M chroma subcarrier frequency (FSC) to its correct value of 3.5756115 MHz and adjusts horizontal total samples for PAL-M, according with formula Line Draw Time / (4*FSC). Signed-off-by:
-
Michael Schimek authored
This patch fixes NTSC VBI capturing in the saa7134 driver. Signed-off-by:
Michael H. Schimek <mschimek@gmx.at> Cc: <video4linux-list@redhat.com> Signed-off-by:
-
Peter Skipworth authored
The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Michael Krufky authored
This patch allows full analog functionality for the DViCO FusionHDTV3 Gold-Q, 18ac:d820 which has a Conexant cx23882, Thompson7611, and LG 3202. It does NOT yet support digital decoding or digital audio without the internal analog audio jack connected to the sound board, but it works perfectly in analog mode. Signed-off-by:
-
Adrian Bunk authored
VIDEO_CX88_DVB must select DVB_CX22702 (due to its cx22702_attach usage). This patch fixes kernel Bugzilla #4594 (http://bugzilla.kernel.org/show_bug.cgi?id=4594). Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Alexey Dobriyan authored
> - *ptr = sg_dma_address(list) - list->offset; > + *ptr = cpu_to_le32(sg_dma_address(list) - list->offset); Clearly mark pointers to little-endian things. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Gerd Knorr authored
Fix byteorder bug in the saa7134 driver. With that ObviouslyCorrect[tm] patch applied the driver reportly works on powerpc. Signed-off-by:
-
NeilBrown authored
Set the recovery directory via /proc/fs/nfsd/nfs4recoverydir. It may be changed any time, but is used only on startup. Signed-off-by:
Andy Adamson <andros@citi.umich.edu> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
NeilBrown authored
This patch adds the code to create and remove client subdirectories from the recovery directory, as described in the previous patch comment. Signed-off-by:
-
NeilBrown authored
NFSv4 clients are required to know what state they have on the server so that they can reclaim it on server reboot. However, it is possible for pathalogical combinations of server reboots and network partitions to leave a client in a state where it cannot know whether it has lost its state on the server. For this reason, rfc3530 requires that we store some information about clients to stable storage. So we maintain a directory /var/lib/nfs/v4recovery with a subdirectory for each client with active state. We leave open the possibility of including files underneath each such subdirectory with information about the client, but for now the subdirectories are empty. We create a client subdirectory whenever a client makes its first non-reclaim open_confirm. We remove a client subdirectory whenever either a) its lease expires, or b) the grace period ends without it reclaiming anything. When handling reclaims, we allow the reclaim if and only if the client doing the reclaim has a subdirectory. This patch adds just the code to scan the recovery directory on nfsd startup. Signed-off-by: -
NeilBrown authored
The cb_parsed field is only used by probe_callback, to determine whether the callback information has been filled in by setclientid. But there is no way that probe_callback() can be called without that having already happened, so that check is superfluous, as is cb_parsed. Signed-off-by:
-
NeilBrown authored
>From the language of rfc3530 section 8.1.3 (e.g., the suggestion that a "process id" might be a reasonable lockowner value) it's conceivable that a client might want to use the same lockowner string on multiple files, so we may as well allow that. We expect each use of open_to_lockowner to create a distinct seqid stream, though. For now we're also allowing multiple uses of open_to_lockowner with the same open, though it seems unlikely clients would actually do that. Also add a comment reminding myself of some very non-scalable data structures. Signed-off-by:
-
NeilBrown authored
Trivial renaming patch: I can never remember, while looking at various lists relating the nfsd4 state structures, which are the "heads" and which are items on other lists, or which structures are actually on the various lists. The following convention helps me: given structures foo and bar, with foo containing the head of a list of bars, use "bars" for the name of the head of the list contained in the struct foo, and use "per_foo" for the entries in the struct bars. Already done for struct nfs4_file; go ahead and do it for the other nfsd4 state structures. Signed-off-by:
-
NeilBrown authored
Minor cleanup, remove some unnecessary printk's. Signed-off-by:
-
NeilBrown authored
Trivial whitespace and comment fixes. Signed-off-by:
-
NeilBrown authored
Change from "goto" to "else if" format in setclientid_confirm. From: Fred Isaman Signed-off-by:
-
NeilBrown authored
NFS4_INVAL is not a valid error for setclientid_confirm, and INUSE is the more logical error here anyway. From: Fred Isaman Signed-off-by:
-
NeilBrown authored
Setclientid_confirm code confused states 1 and 3 (numbering from the IMPLEMENTATION section of rfc3530, section 14.2.33). Fix this. State 1 allows the client to change the callback channel on the fly. We don't implement this currently, so just turn off the callback channel in this case. From: Fred Isaman Signed-off-by:
-
NeilBrown authored
Setclientid code assumes there is only one match in unconfirmed list. Make sure that assumption holds. From: Fred Isaman Signed-off-by:
-
NeilBrown authored
This patch contains the following possible cleanups: - make needlessly global code static Signed-off-by:
-
NeilBrown authored
For the purposes of reboot recovery, we want to do some work during the transition period at the end of the grace period. Some of that work must be guaranteed to have a certain relationship with the end of the grace period, so we want to control the transition there. Our approach is to modify the in_grace() checks to consult a global variable instead of checking the time directly, to schedule the first run of the laundromat thread at the end of the grace period, and to set the global end-of-grace-period there. Signed-off-by:
-
NeilBrown authored
Minor setclientid cleanup Signed-off-by:
-
NeilBrown authored
For the purposes of reboot recovery we keep a directory with subdirectories each having a name that is the ascii hex representation of the md5 sum of a client identifier for an active client. This adds the code to calculate that name. We also use it for the purposes of comparing clients, so if someone ever manages to find two client names that are md5 collisions, then we'll return clid_inuse to the second. Signed-off-by:
-
NeilBrown authored
We can be a little more concise here. Signed-off-by:
-
NeilBrown authored
Adopt standard kernel style by defining a no-op function instead of putting ifdef's in the code where the function is called. Signed-off-by:
-
NeilBrown authored
nfs4_reclaim_init is no longer performing any useful function. Signed-off-by:
-
NeilBrown authored
Separate out stuff that needs initialization on startup from stuff that only needs initialization on module init from static data. Signed-off-by:
-
NeilBrown authored
Somewhat gratuitous rename to simplify following patch. Signed-off-by:
-
NeilBrown authored
Allow recovery of delegations after reboot. Signed-off-by:
-
NeilBrown authored
The only way the protocol gives to change the lease time on the fly is to simulate a reboot. We don't have that completely right in the current code; among other things, we should probably put lockd in grace too while we do this. For now, let's just keep this simple, and wait till the next time nfsd starts to register any changes in lease time. If the administrator really wants to change the lease time *now*, they can go ahead and bring nfsd down and then back up again after changing the lease time. Also remove the "if (reclaim_str_hashtbl_size == 0)" case, a shortcut which skips the grace period if we know of no clients in need of recovery. This isn't going to work well with nlm. Signed-off-by:
-
NeilBrown authored
We're running the laundromat work on the default kevent worker thread. But the laundromat takes the nfsv4 state semaphore, which is used for way too much stuff, and the potential for deadlocks is high. Better to have this on a separate workqueue. Signed-off-by:
-
