- 19 Jun, 2006 27 commits
-
-
Kenji Kaneshige authored
This patch removes unused hpc_event_lock. This patch has no functional change. Signed-off-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Kenji Kaneshige authored
This patch cleans up the interrupt polling timer code in shpchp_hpc.c. This has no functional changes. Signed-off-by:
-
Kenji Kaneshige authored
This patch cleans up the code related to issuing SHPC commands. This patch has no functional changes. Signed-off-by:
-
Kenji Kaneshige authored
This patch cleans up the interrupt handler of shpchp driver. This patch has no functional changes. Signed-off-by:
-
Kenji Kaneshige authored
This patch removes unnecessary error check for hpc_ctlr_handle. Signed-off-by:
-
Kenji Kaneshige authored
This patch implements .get_address callback of hotplug_slot_ops for PCIEHP driver. With this patch, we can see bus address of hotplug slots as follows: # cat /sys/bus/pci/slots/0010_0000/address 0000:0a:00 Signed-off-by:
-
Kenji Kaneshige authored
The PCIEHP driver leaks reference counter of pci_dev structures. This patch adds missing pci_dev_put() calls to PCIEHP driver. Signed-off-by:
-
Kenji Kaneshige authored
This patch replaces pci_find_slot() with pci_get_slot() in PCIEHP driver. This patch enables PCI Express Hotplug on the system which has multiple PCI domains. Signed-off-by:
-
Mike Habeck authored
This is a repost of a patch submitted by Prarit Bhargava on 01-19-06 that never got integrated. The get_power_status function is currently reporting a bitwise mapping of the slot if the slot is powered on. It should return 1 if powered on and 0 if powered off. Signed-off-by:
Mike Habeck <habeck@sgi.com> Signed-off-by:
-
Kenji Kaneshige authored
The workqueue thread of shpchp driver should be created only when SHPC based hotplug slots are detected on the system. Signed-off-by:
-
Kenji Kaneshige authored
Global SERR and Interrupt should be masked at shpchp driver unload time. Signed-off-by:
-
Kenji Kaneshige authored
Current SHPCHP driver doesn't take care of RsvdP/RsvdZ[*] bits in controller SERR-INT register. This might cause unpredicable results. This patch fixes this bug. [*] RsvdP and RsvdZ are defined in SHPC spec as follows: RsvdP - Reserved and Preserved. Register bits of this type are reserved for future use as R/W bits. The value read is undefined. Writes are ignored. Software must follow These rules when accessing RsvdP bits: - Software must ignore RsvdP bits when testing values read from these registers. - Software must not depend on RsvdP bit's ability to retain information when written - Software must always write back the value read in the RsvdP bits when writing one of these registers. RsvdZ - Reserved and Zero. Register bits of this type are reserved for future use as R/WC bits. The value read is undefined. Writes are ignored. Software must follow these rules when accessing RsvdZ bits: - Software must ignore RsvdZ bits when testing values read from these registers. - Software must not depends on a RsvdZ bit's ability to retain information when written. - Software must always write 0 to RsvdZ bits when writing one of these register. Signed-off-by: -
Kenji Kaneshige authored
Current SHPCHP driver doesn't take care of RsvdP/RsvdZ[*] bits in logical slot registers. This might cause unpredicable results. This patch fixes this bug. [*] RsvdP and RsvdZ are defined in SHPC spec as follows: RsvdP - Reserved and Preserved. Register bits of this type are reserved for future use as R/W bits. The value read is undefined. Writes are ignored. Software must follow These rules when accessing RsvdP bits: - Software must ignore RsvdP bits when testing values read from these registers. - Software must not depend on RsvdP bit's ability to retain information when written - Software must always write back the value read in the RsvdP bits when writing one of these registers. RsvdZ - Reserved and Zero. Register bits of this type are reserved for future use as R/WC bits. The value read is undefined. Writes are ignored. Software must follow these rules when accessing RsvdZ bits: - Software must ignore RsvdZ bits when testing values read from these registers. - Software must not depends on a RsvdZ bit's ability to retain information when written. - Software must always write 0 to RsvdZ bits when writing one of these register. Signed-off-by: -
Kenji Kaneshige authored
This patch cleans up the code to access bits in slot logical registers. This patch has no functional change. Signed-off-by:
-
Kenji Kaneshige authored
This patch cleans up the code to access slot logical registers. This patch has no functional changes. Signed-off-by:
-
Kenji Kaneshige authored
This patch cleans up the code to access SHPC working register sets. This patch has no functional changes. Signed-off-by:
-
Kenji Kaneshige authored
Current PCHEHP driver doesn't have any code to program hotplug parameters from firmware. So hotplug parameters are never programed at hot-add time. This patch add support for programming hotplug parameters to PCIEHP driver. Signed-off-by:
-
Kenji Kaneshige authored
This patch adds support for _HPX (Hot Plug Parameter Extensions) defined in ACPI3.0a spec. Signed-off-by:
-
Kenji Kaneshige authored
This patch converts the improper error message about OSHP evaluation to debug message which is displayed only when pci_hotplug.ko is loaded with debugging mode enabled. To do this, this patch adds a new module parameter "debug_acpi" to pci_hotplug.ko for enabling/disabling debug messages in acpi_pcihp.c. Signed-off-by:
-
Kenji Kaneshige authored
This patch fixes the problem that hotplug parameters are not programed when PCI cards are hot-added by ACPIPHP, SHPCHP and PCIEHP driver. The pci_dev structure being hot-added is not bound to ACPI handle, so we need to trace PCI bus tree to find ACPI handle. Signed-off-by:
-
Kristen Accardi authored
Don't call pci_enable_device from pciehp because the pcie port service driver already does this. Signed-off-by:
Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by:
-
Kristen Accardi authored
acpi_os_free should not be used by drivers outside of acpi/*/*.c. Replace with kfree(). Signed-off-by:
-
MUNEDA Takahiro authored
When acpiphp_enable_slot() is failed, acpiphp does not change the slot->flags. Therefore, when user tries to read power status, acpiphp_get_power_status() returns the enable status whether the slot is not really enabled. This patch fixes this BUG. Signed-off-by:
MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by:
-
MUNEDA Takahiro authored
I encountered the problem that when there are some hotplug slots are under the host bridge, the hotplug slots under the p2p bridge are not treated as hotpluggable. This patch fixes this BUG. Signed-off-by:
-
MUNEDA Takahiro authored
o hotplug slots add When the hot-added PCI device is p2p bridge, acpiphp calls find_p2p_bridge() to add hotplug slots. o hotplug slots remove When the hot-removing PCI device is p2p bridge, acpiphp calls cleanup_p2p_bridge() to remove hotplug slots. o notify handler exchange When the p2p bridge is added, acpiphp changes the notify hanlder. If no bridge device is inserted into the hotpluggable PCI slot, acpiphp installs the notify handler for function. After the p2p bridge hot-add, acpiphp has to install the notify handler for bridge. Because, the role of the handlers are not same. The hot-remove case is ditto. Signed-off-by:
-
MUNEDA Takahiro authored
Current acpiphp does not free acpi_device structs when the PCI devices are removed. When the PCI device is added, acpi_bus_add() fails because acpi_device struct has already exists. So, _PRT method does not evaluate. This patch fixes this issue. Signed-off-by:
-
Prarit Bhargava authored
SGI hotplug driver changes required to support Tollhouse system PCI hotplug, and implements the PRF_HOTPLUG_SUPPORT feature bit. Signed-off-by:
Prarit Bhargava <prarit@sgi.com> Signed-off-by:
-
- 18 Jun, 2006 1 commit
-
-
Linus Torvalds authored
Being named "Crazed Snow-Weasel" instills a lot of confidence in this release, so I'm sure this will be one of the better ones.
-
- 17 Jun, 2006 8 commits
-
-
Arnd Bergmann authored
Reflect the fact that the Cell Broadband Engine supports 64k pages by adding the bit to the CPU features. Signed-off-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Arnd Bergmann authored
The page size encoding passed to tlbie is incorrect for new-style large pages. This fixes it. This doesn't affect anything on older machines because mmu_psize_defs[psize].penc (the page size encoding) is 0 for 4k and 16M pages (the two are distinguished by a separate "is a large page" bit). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Oleg Nesterov authored
arm_timer() checks PF_EXITING to prevent BUG_ON(->exit_state) in run_posix_cpu_timers(). However, for some reason it does so only for CPUCLOCK_PERTHREAD case (which is imho wrong). Also, this check is not reliable, PF_EXITING could be set on another cpu without any locks/barriers just after the check, so it can't prevent from attaching the timer to the exiting task. The previous patch makes this check unneeded. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Oleg Nesterov authored
do_exit() clears ->it_##clock##_expires, but nothing prevents another cpu to attach the timer to exiting process after that. arm_timer() tries to protect against this race, but the check is racy. After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and before do_exit() calls 'schedule() local timer interrupt can find tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu does sys_wait4) interrupted task has ->signal == NULL. At this moment exiting task has no pending cpu timers, they were cleanuped in __exit_signal()->posix_cpu_timers_exit{,_group}(), so we can just return from irq. John Stultz recently confirmed this bug, see http://marc.theaimsgroup.com/?l=linux-kernel&m=115015841413687Signed-off-by: -
Oleg Nesterov authored
If the local timer interrupt happens just after do_exit() sets PF_EXITING (and before it clears ->it_xxx_expires) run_posix_cpu_timers() will call check_process_timers() with tasklist_lock + ->siglock held and check_process_timers: t = tsk; do { .... do { t = next_thread(t); } while (unlikely(t->flags & PF_EXITING)); } while (t != tsk); the outer loop will never stop. Actually, the window is bigger. Another process can attach the timer after ->it_xxx_expires was cleared (see the next commit) and the 'if (PF_EXITING)' check in arm_timer() is racy (see the one after that). Signed-off-by: -
Stephen Hemminger authored
A couple of fixes that should prevent crashes when using netconsole and suspend/resume. First, netconsole poll routine shouldn't run unless the device is up; second, the NAPI poll should be disabled during suspend. This is only an issue on sky2, because it has to have one NAPI poll routine for both ports on dual port boards. Normal drivers use netif_rx_schedule_prep and that checks for netif_running. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Jens Axboe authored
If get_user_pages() returns less pages than what we asked for, we jump to out_unmap which will return ERR_PTR(ret). But ret can contain a positive number just smaller than local_nr_pages, so be sure to set it to -EFAULT always. Problem found and diagnosed by Damien Le Moal <damien@sdl.hitachi.co.jp> Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Jens Axboe authored
Some time ago the cdrom open routine was changed so that we call the driver's open routine before checking to see if it is read only. However, if we discovered that a read write open was not possible and the open flags required a writable open, we just returned -EROFS without calling the driver's release routine. This seems to work for most cdrom drivers, but breaks the Powerpc iSeries virtual cdrom rather badly. This just inserts the release call in the error path to balance the call to "->open()" done by "open_for_data()". Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 14 Jun, 2006 2 commits
-
-
Jens Axboe authored
We don't clear the seek stat values in cfq_alloc_io_context(), and if ->seek_mean is unlucky enough to be set to -36 by chance, the first invocation of cfq_update_io_seektime() will oops with a divide by zero in do_div(). Just memset the entire cic instead of filling invididual values independently. Signed-off-by:
-
Kirill Korotaev authored
If flock_lock_file() failed to allocate flock with locks_alloc_lock() then "error = 0" is returned. Need to return some non-zero. Signed-off-by:
Pavel Emelianov <xemul@openvz.org> Signed-off-by:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
-
- 13 Jun, 2006 2 commits
-
-
Stephen Hemminger authored
The resume bug was caused not by an early interrupt but because the idle timeout was not being stopped on suspend. Also disable hardware IRQ's on suspend. Will need to revisit this with hotplug? Signed-off-by:
-
Stephen Hemminger authored
The hardware should be fully shut off during suspend, and the base irq mask restored during resume. Signed-off-by:
-
