- 22 Sep, 2005 27 commits
-
-
Linus Torvalds authored
-
Hidetoshi Seto authored
Verify the pfn is valid before calling pfn_to_page(), and cut isolation message if nothing was done. Signed-off-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by:
Russ Anderson <rja@sgi.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Keith Owens authored
Wire the MCA/INIT handler stacks into DTR[2] and track them in IA64_KR(CURRENT_STACK). This gives the MCA/INIT handler stacks the same TLB status as normal kernel stacks. Reload the old CURRENT_STACK data on return from OS to SAL. Signed-off-by:
Keith Owens <kaos@sgi.com> Signed-off-by:
-
Peter Chubb authored
The sd driver now uses scsi_execute_req() for almost everything. scsi_execute_req() converts requests into scatterlists. Fix the HP SCSI disk simulator to understand scatterlists for more commands. Without this patch the current kernel will not boot on the simulator (the disks are always detected as having no sectors, and so cannot be mounted). Signed-off-by:
Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by:
-
Kumar Gala authored
For platforms that don't have PCI IO at 0 the outbound window registers were not being properly configured. Signed-off-by:
Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by:
Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alan Stern authored
This patch (as564) updates Documentation/usb/URB.txt, bringing it roughly up to the current level. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Pete Zaitcev authored
This code appears to be more trouble than it's worth, considering that no normal users reload drivers. So, we comment it for now. It is not removed outright for the benefit of hackers (that is, myself). Signed-off-by:
Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by:
-
David Hollis authored
USB: Add device id's for Novatel Wireless CDMA wireless PC card. The Novatel CDMA card behaves the same as the AirPrime by providing a USB serial port. Signed-off-by:David Hollis <dhollis@davehollis.com> Signed-off-by:
-
Matthias Urlichs authored
The card sometimes sends >2000 bytes in one single chunk. Ouch. Signed-Off-By:
Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by:
-
Kevin Vigor authored
Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by:
Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
David Brownell authored
Three minor sl811-hcd fixes: - Elminate memory leak on one (rare) disable/shutdown path. - For periodic transfers that don't need to be scheduled, update urb->start_frame to represent the transfer phase correctly. - Report the (single) port as removable, by default. Since no drivers yet use start_frame or that part of the hub descriptor, only that leak is likely to ever matter. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Richard Purdie authored
This patch fixes several types in the PXA25x udc driver and hence fixes several compiler warnings. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Acked-by:
-
Peter Favrholdt authored
I'm using a 2 port USB RS232 dongle to connect to a serial-IR cradle for a bar code reader). Detecting the baudrate of the serial-IR involves keeping DTR low while changing baudrate. This works using normal 16550A serial ports as well as the FTDI driver version 1.4.0 (Linux 2.6.8) but stopped working with the change to "ensure RTS and DTR are raised when changing baudrate" introduced in version 1.4.1 (Linux 2.6.9). The attached patch fixes this, so RTS and DTR is only raised when changing baudrate iff the previous baudrate was B0. Signed-off-by:
Peter Favrholdt <pfavr@how.dk> Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Matthias Urlichs authored
Added support for HUAWEI E600 and Audiovox AirCard User reports say that these devices work without driver modification. Signed-off-by:
-
Pete Zaitcev authored
This patch fixes a few problems with ub and cleans up a couple of things: - Bump UB_MAX_REQ_SG, this allows to burn CDs - Drop initialization of urb.transfer_flags, now that URB_UNLINK_ASYNC is gone - Add forgotten processing of stalls at GetMaxLUN - Remove a few more P3-tagged printks whose time has come - Correct comment about ZIP-100Signed-off-by:
-
Linda Xie authored
Signed-off-by:
Linda Xie <lxie@us.ibm.com> Signed-off-by:
-
Amos Waterland authored
This function expects an unsigned 32-bit type as its third argument: static u32 pci_size(u32 base, u32 maxbase, u32 mask) However, given these definitions: #define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) #define PCI_ROM_ADDRESS_MASK (~0x7ffUL) these two calls in drivers/pci/probe.c are problematic for architectures for which a UL is not equivalent to a u32: sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK); sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK); Hence the below compile warning when building for ARCH=ppc64: drivers/pci/probe.c: In function `pci_read_bases': /.../probe.c:168: warning: large integer implicitly truncated to unsigned type /.../probe.c:218: warning: large integer implicitly truncated to unsigned type Here is a simple fix. Signed-off-by:
Amos Waterland <apw@us.ibm.com> Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Bjorn Helgaas authored
Unused variable. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Remove my name from the I2C maintainer, Jean is more than capable of handling it all now. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Bill Nottingham authored
The class symlinks in sysfs don't properly handle changing device names. To demonstrate, rename your network device from eth0 to eth1. Your pci (or usb, or whatever) device will still have a 'net:eth0' link, except now it points to /sys/class/net/eth1. The attached patch makes sure the class symlink name changes when the class device name changes. It isn't 100% correct, it should be using sysfs_rename_link. Unfortunately, sysfs_rename_link doesn't exist. Signed-off-by:
Bill Nottingham <notting@redhat.com> Signed-off-by:
-
Daniel Ritz authored
add the helper and use it instead of open coding the klist_node_attached() check (which is a layering violation IMHO) idea by Alan Stern. Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Daniel Ritz authored
bus_rescan_devices_helper() does not hold the dev->sem when it checks for !dev->driver(). device_attach() holds the sem, but calls again device_bind_driver() even when dev->driver is set. What happens is that a first device_attach() call (module insertion time) is on the way binding the device to a driver. Another thread calls bus_rescan_devices(). Now when bus_rescan_devices_helper() checks for dev->driver it is still NULL 'cos the the prior device_attach() is not yet finished. But as soon as the first one releases the dev->sem the second device_attach() tries to rebind the already bound device again. device_bind_driver() does this blindly which leads to a corrupt driver->klist_devices list (the device links itself, the head points to the device). Later a call to device_release_driver() sets dev->driver to NULL and breaks the link it has to itself on knode_driver. Rmmoding the driver later calls driver_detach() which leads to an endless loop 'cos the list head in klist_devices still points to the device. And since dev->driver is NULL it's stuck with the same device forever. Boom. And rmmod hangs. Very easy to reproduce with new-style pcmcia and a 16bit card. Just loop modprobe <pcmcia-modules> ;cardctl eject; rmmod <card driver, pcmcia modules>. Easiest fix is to check if the device is already bound to a driver in device_bind_driver(). This avoids the double binding. Signed-off-by:
-
Tommy Christensen authored
vlan_hwaccel_rx should be used when in interrupt context. Fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=5284Signed-off-by:
Tommy S. Christensen <tommy.christensen@tpack.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com>
-
Stephen Hemminger authored
Cleanup receive buffer allocation and management, Add more error handling checks from PHY and bump version. Signed-off-by: -
Stephen Hemminger authored
Expand the returned data for ethtool debug access to include all of the mapped PCI area; except for the small set of registers that are for diagnostic RAM access. Access to those registers will hang the system. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
nsxfreddy@gmail.com authored
Fix bond_enslave link monitoring warning to check use_carrier status and ethtool_ops in addition to do_ioctl. This version checks ethtool_ops as well as do_ioctl, and also uses the per-bond params.use_carrier instead of the global use_carrier. Signed-off-by:
Jason R. Martin <nsxfreddy@gmail.com> Signed-off-by:
-
- 21 Sep, 2005 13 commits
-
-
Paolo 'Blaisorblade' Giarrusso authored
The header declaring this function wasn't included, so the function declaration was totally bogus wrt. the proto - even if this wasn't going to fail at all. It was so bad that the compile warning I got was "control reaches end of non-void function", i.e. missing return. Actually, this has been there for ages, the consolidation patch just added the warning which was needed to clean it up. Nice. Really. Cc: Allan Graves <allan.graves@gmail.com> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Explain why the casting we do to silence this warning is indeed safe. It is because the field we're casting from, though being 64-bit wide, was filled with a pointer in first place by ourselves. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Readd this header (deleted in 60d339f6). A warning is spit out here about undeclared getpgrp(). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Even if with a bit of misunderstanding, Al fixed this in commit 95608261. Well, the symbol was intended to come from userspace (it exists there on normal host), but since some hosts may miss that, using the kernel one is just as fine. However, rename it to be named consistently with the rest. Actually, he missed converting ELFCLASS32 to coming from kernel headers. For consistence, add ELFCLASS64 too. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
gcc is now complaining during link on some hosts - fix it as for other things. Reported by Antoine Martin <antoine@nagafix.co.uk>. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Translate uname output taken from the host if needed. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
I am a lamer :-(. Luckily, Luo Xin performed LTP testing and found this failure. Btw, the fact that the patch in which I introduced this was merged shows that: a) I'm really trusted by people b) sometimes they're wrong about point a). c) lack of time for reviewers. CC: Luo Xin <luothing@sina.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
When removing verify_area, verify_area_{tt,skas} were forgotten. Signed-off-by: -
Paolo 'Blaisorblade' Giarrusso authored
As recently done by Russell King for ARM, commit 4732efbe introduces a generic asm/futex.h copied along most arches, which includes a "-ENOSYS support" to be changed if needed. However, it includes an unused var (taken from the "real" version) which GCC warns about. Remove it from all arches having that file version (i.e. same GIT id). $ git-diff-tree -r HEAD and $ git-ls-tree -r HEAD include/|grep 9feff4ce1424bc390608326240be369eb13aa648 may be more interesting than looking at the patch itself, to make sure I've just copied the arm header to all other archs having the original dummy version of this file. Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Follow up to 4732efbe - uml must just reuse as-is the backing architecture support. There is a micro-fixup is needed for the included file, which won't affect i386 behaviour at all. I've not tested compilation on x86_64, only on x86, but the code is almost the same except the culprit test, so everything should be ok on x86_64 too. Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by:
-
Linus Torvalds authored
-
Catalin Marinas authored
Patch from Catalin Marinas This patch prevents the "noreturn function does return" warning in the __bug() function in arch/arm/kernel/traps.c Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Linus Torvalds authored
-
