- 30 Mar, 2006 2 commits
-
-
Alan Cox authored
Some hardware doesn't want the usual mode setup logic running. This allows the hardware driver to replace it for special cases in the least invasive way possible. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Alan Cox authored
This is the minimal patch set to enable the current code to be used with a controller following SFF (ie any PATA and early SATA controllers) safely without crashes if there is no BMDMA area or if BMDMA is not assigned by the BIOS for some reason. Simplex status is recorded but not acted upon in this change, this isn't a problem with the current drivers as none of them are for simplex hardware. A following diff will deal with that. The flags in the probe structure remain ->host_set_flags although Jeff asked me to rename them, simply because the rename would break the usual Linux rules that old code should break when there are changes. not compile and run and then blow up/eat your computer/etc. Renaming this later is a trivial exercise once a better name is chosen. Signed-off-by:
-
- 29 Mar, 2006 38 commits
-
-
Tejun Heo authored
Kill trailing whitespace. Signed-off-by: -
Jeff Garzik authored
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: Rename init functions. [TCP]: Fix RFC2465 typo. [INET]: Introduce tunnel4/tunnel6 [NET]: deinline 200+ byte inlines in sock.h [ECONET]: Convert away from SOCKOPS_WRAPPED [NET]: Fix ipx/econet/appletalk/irda ioctl crashes [NET]: Kill Documentation/networking/TODO [TG3]: Update version and reldate [TG3]: Skip timer code during full lock [TG3]: Speed up SRAM access [TG3]: Fix PHY loopback on 5700 [TG3]: Fix bug in 40-bit DMA workaround code [TG3]: Fix probe failure due to invalid MAC address
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (67 commits) [PATCH] powerpc: Remove oprofile spinlock backtrace code [PATCH] powerpc: Add oprofile calltrace support to all powerpc cpus [PATCH] powerpc: Add oprofile calltrace support [PATCH] for_each_possible_cpu: ppc [PATCH] for_each_possible_cpu: powerpc [PATCH] lock PTE before updating it in 440/BookE page fault handler [PATCH] powerpc: Kill _machine and hard-coded platform numbers ppc: Fix compile error in arch/ppc/lib/strcase.c [PATCH] git-powerpc: WARN was a dumb idea [PATCH] powerpc: a couple of trivial compile warning fixes powerpc: remove OCP references powerpc: Make uImage default build output for MPC8540 ADS powerpc: move math-emu over to arch/powerpc powerpc: use memparse() for mem= command line parsing ppc: fix strncasecmp prototype [PATCH] powerpc: make ISA floppies work again [PATCH] powerpc: Fix some initcall return values [PATCH] powerpc: Workaround for pSeries RTAS bug [PATCH] spufs: fix __init/__exit annotations [PATCH] powerpc: add hvc backend for rtas ...
-
git://oss.sgi.com:8090/oss/git/xfs-2.6Linus Torvalds authored
* git://oss.sgi.com:8090/oss/git/xfs-2.6: [XFS] Cleanup in XFS after recent get_block_t interface tweaks. [XFS] Remove unused/obsoleted function: xfs_bmap_do_search_extents() [XFS] A change to inode chunk allocation to try allocating the new chunk Fixes a regression from the recent "remove ->get_blocks() support" [XFS] Fix compiler warning and small code inconsistencies in compat [XFS] We really suck at spulling. Thanks to Chris Pascoe for fixing all
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394: ohci1394: cleanup the "Unexpected PCI resource length" warning. sbp2: misc debug logging cleanups sbp2: proper treatment of DID_OK ieee1394: set read permission for parameter disable_irm sbp2: check for ARM failure ohci1394: clean up asynchronous and physical request filters programming ieee1394: remove amdtp remains from ieee1394_core.h ieee1394: remove devfs support Signed-off-by:Jody McIntyre <scjody@modernduck.com> sbp2: prevent unloading of 1394 low-level driver
-
Anton Blanchard authored
Remove oprofile spinlock backtrace code now we have proper calltrace support. Also make MMCRA sihv and sipr bits a variable since they may change in future cpus. Finally, MMCRA should be a 64bit quantity. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Anton Blanchard authored
Add calltrace support for other powerpc cpus. Tested on 7450. Signed-off-by:
-
Brian Rogan authored
Add oprofile calltrace support to powerpc. Disable spinlock backtracing now we can use calltrace info. (Updated to work on both 32bit and 64bit by me). Signed-off-by:
-
KAMEZAWA Hiroyuki authored
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu. Signed-off-by:
-
Eugene Surovegin authored
Fix 44x and BookE page fault handler to correctly lock PTE before trying to pte_update() it, otherwise this PTE might be swapped out after pte_present() check but before pte_uptdate() call, resulting in corrupted PTE. This can happen with enabled preemption and low memory condition. Signed-off-by:
Eugene Surovegin <ebs@ebshome.net> Signed-off-by:
-
Oleg Nesterov authored
send_sigqueue() checks PF_EXITING, then locks p->sighand->siglock. This is unsafe: 'p' can exit in between and set ->sighand = NULL. The race is theoretical, the window is tiny and irqs are disabled by the caller, so I don't think we need the fix for -stable tree. Convert send_sigqueue() to use lock_task_sighand() helper. Also, delete 'p->flags & PF_EXITING' re-check, it is unneeded and the comment is wrong. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Oleg Nesterov authored
The previous patch has changed callsites of do_notify_parent_cldstop() so that to_self == (->ptrace & PT_PTRACED) always (as it should be). We can remove this parameter now. Signed-off-by:
-
Oleg Nesterov authored
Remove an obscure 'stop_count < 0' check in finish_stop(). The previous patch made this case impossible. Signed-off-by:
-
Oleg Nesterov authored
do_signal_stop() considers 'thread_group_empty()' as a special case. This was needed to avoid taking tasklist_lock. Since this lock is unneeded any longer, we can remove this special case and simplify the code even more. Also, before this patch, finish_stop() was called with stop_count == -1 for 'thread_group_empty()' case. This is not strictly wrong, but confusing and unneeded. Signed-off-by:
-
Oleg Nesterov authored
Move 'tsk->sighand = NULL' from cleanup_sighand() to __exit_signal(). This makes the exit path more understandable and allows us to do cleanup_sighand() outside of ->siglock protected section. Signed-off-by:
-
Oleg Nesterov authored
Eric W. Biederman wrote: > > Ok. SUSV3/Posix is clear, fork is atomic with respect > to signals. Either a signal comes before or after a > fork but not during. (See the rationale section). > http://www.opengroup.org/onlinepubs/000095399/functions/fork.html > > The tasklist_lock does not stop forks from adding to a process > group. The forks stall while the tasklist_lock is held, but a fork > that began before we grabbed the tasklist_lock simply completes > afterwards, and the child does not receive the signal. This also means that SIGSTOP or sig_kernel_coredump() signal can't be delivered to pgrp/session reliably. With this patch copy_process() returns -ERESTARTNOINTR when it detects a pending signal, fork() will be restarted transparently after handling the signals. This patch also deletes now unneeded "group_stop_count > 0" check, copy_process() can no longer succeed while group stop in progress. Signed-off-by:
Eric Biederman <ebiederm@xmission.com> Signed-off-by:
-
Oleg Nesterov authored
This patch kills PIDTYPE_TGID pid_type thus saving one hash table in kernel/pid.c and speeding up subthreads create/destroy a bit. It is also a preparation for the further tref/pids rework. This patch adds 'struct list_head thread_group' to 'struct task_struct' instead. We don't detach group leader from PIDTYPE_PID namespace until another thread inherits it's ->pid == ->tgid, so we are safe wrt premature free_pidmap(->tgid) call. Currently there are no users of find_task_by_pid_type(PIDTYPE_TGID). Should the need arise, we can use find_task_by_pid()->group_leader. Signed-off-by:
-
Oleg Nesterov authored
do_sigaction() does not need tasklist_lock anymore, we can simplify the code. Signed-off-by:
-
Oleg Nesterov authored
do_group_exit() takes tasklist_lock for zap_other_threads(), this is unneeded now. Signed-off-by:
-
Oleg Nesterov authored
do_signal_stop() does not need tasklist_lock anymore. So it does not need to do misc re-checks, and we can simplify the code. Signed-off-by:
-
Oleg Nesterov authored
handle_stop_signal() does not need tasklist_lock for SIG_KERNEL_STOP_MASK signals anymore. Signed-off-by:
-
Oleg Nesterov authored
sys_times: don't take tasklist_lock Signed-off-by:
-
Oleg Nesterov authored
This patch moves __unhash_process() call from realease_task() to __exit_signal(), so __detach_pid() is called with ->siglock held. This means we don't need tasklist_lock to iterate over thread group anymore: copy_process() was already changed to do attach_pid() under ->siglock. Eric's "pidhash-kill-switch_exec_pids.patch" from -mm changed de_thread() so it doesn't touch PIDTYPE_TGID. NOTE: de_thread() still needs some attention. It still changes task->pid lockless. Taking ->sighand.siglock here allows to do more tasklist_lock removals. Signed-off-by:
-
Oleg Nesterov authored
This patch reverts 'CONFIG_SMP && thread_group_empty()' optimization in sys_times(). The reason is that the next patch breaks memory ordering which is needed for that optimization. tasklist_lock in sys_times() will be eliminated completely by further patch. Signed-off-by:
-
Oleg Nesterov authored
__exit_signal() is private to release_task() now. I think it is better to make it static in kernel/exit.c and export flush_sigqueue() instead - this function is much more simple and straightforward. Signed-off-by:
-
Oleg Nesterov authored
Cosmetic, rename __exit_sighand to cleanup_sighand and move it close to copy_sighand(). This matches copy_signal/cleanup_signal naming, and I think it is easier to follow. Signed-off-by:
"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
This patch factors out duplicated code under 'if' branches. Also, BUG_ON() conversions and whitespace cleanups. Signed-off-by:
-
Oleg Nesterov authored
__exit_signal() does important cleanups atomically under ->siglock. It is also called from copy_process's error path. This is not good, for example we can't move __unhash_process() under ->siglock for that reason. We should not mix these 2 paths, just look at ugly 'if (p->sighand)' under 'bad_fork_cleanup_sighand:' label. For copy_process() case it is sufficient to just backout copy_signal(), nothing more. Again, nobody can see this task yet. For CLONE_THREAD case we just decrement signal->count, otherwise nobody can see this ->signal and we can free it lockless. This patch assumes it is safe to do exit_thread_group_keys() without tasklist_lock. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Oleg Nesterov authored
The only caller of exit_sighand(tsk) is copy_process's error path. We can call __exit_sighand() directly and kill exit_sighand(). This 'tsk' was not yet registered in pid_hash[] or init_task.tasks, it has no external references, nobody can see it, and IF (clone_flags & CLONE_SIGHAND) At least 'current' has a reference to ->sighand, this means atomic_dec_and_test(sighand->count) can't be true. ELSE Nobody can see this ->sighand, this means we can free it without any locking. Signed-off-by:
-
Oleg Nesterov authored
In my opinion this patch cleans up the code. Signed-off-by:
-
Oleg Nesterov authored
Add lock_task_sighand() helper and converts group_send_sig_info() to use it. Hopefully we will have more users soon. This patch also removes '!sighand->count' and '!p->usage' checks, I think they both are bogus, racy and unneeded (but probably it makes sense to restore them as BUG_ON()s). ->sighand is cleared and it's ->count is decremented in release_task() with sighand->siglock held, so it is a bug to have '!p->usage || !->count' after we already locked and verified it is the same. On the other hand, an already dead task without ->sighand can have a non-zero ->usage due to ptrace, for example. If we read the stale value of ->sighand we must see the change after spin_lock(), because that change was done while holding that same old ->sighand.siglock. Signed-off-by:
-
Oleg Nesterov authored
This patch borrows a clever Hugh's 'struct anon_vma' trick. Without tasklist_lock held we can't trust task->sighand until we locked it and re-checked that it is still the same. But this means we don't need to defer 'kmem_cache_free(sighand)'. We can return the memory to slab immediately, all we need is to be sure that sighand->siglock can't dissapear inside rcu protected section. To do so we need to initialize ->siglock inside ctor function, SLAB_DESTROY_BY_RCU does the rest. Signed-off-by:
-
Oleg Nesterov authored
Use ptrace_unlink() instead of open-coding. No changes in kernel/exit.o Signed-off-by:
-
Oleg Nesterov authored
Use NULL instead of (... *)0 Signed-off-by:
-
Oleg Nesterov authored
Use remove_parent/add_parent instead of open coding. No changes in kernel/exit.o Signed-off-by:
-
Oleg Nesterov authored
daemonize() calls set_special_pids(1,1), while init and kernel threads spawned from init/main.c:init() run with 0,0 special pids. This patch changes INIT_SIGNALS() so that that they run with ->pgrp == ->session == 1 also. This patch relies on fact that swapper's pid == 1. Now we have no hashed zero pids in pid_hash[]. User-space visibible change is that now /sbin/init runs with (1,1) special pids and becomes a session leader. Quoting Eric W. Biederman: > > daemonize consuming pids (1,1) then consumes pgrp 1. So that when > /sbin/init calls setsid() it thinks /sbin/init is a process group > leader and setsid() fails. So /sbin/init wants pgrp 1 session 1 > but doesn't get it. I am pretty certain daemonize did not exist so > /sbin/init got pgrp 1 session 1 in 2.4. > > That is the bug that is being fixed. > > This patch takes things one step farther and essentially calls > setsid() for pid == 1 before init is execed. That is new behavior > but it cleans up the kernel as we now do not need to support the > case of a process without a process group or a session. > > The only process that could have possibly cared was /sbin/init > and it already calls setsid() because it doesn't want that. > > If this was going to break anything noticeable the change in behavior > from 2.4 to 2.6 would have already done that. Signed-off-by:
-
