- 03 Mar, 2006 5 commits
-
-
Benjamin Herrenschmidt authored
This adds a couple of printk's to windfarm_pm112 to display which control loops are actually starting and fixes a bug where it would not start all loops. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
Some of the windfarm sensor modules can initialize on old machines that don't have full windfarm support like non-dual core desktop G5s. Unfortunately, by doing so, they would trigger a bug in their matching algorithm causing them to attach to the wrong bus, thus triggering issues with the i2c core and breaking the thermal driver. This patch fixes the probing issue (so that they will work when a windfarm port is done to these machines) and also prevents for now windfarm to load at all on these machines that still use therm_pm72 to avoid wasting resources. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
The variable `timebase' used to transfer the current timebase value from one cpu to the other in smp_core99_give/take_timebase was only an unsigned long, i.e. 32 bits on 32-bit machines. It needs to be 64 bits. This makes it a u64, and fixes the issue reported by Kyle Moffett, that the two cpus see wildly different values for the time of day. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This is along the lines suggested by Chris Lumens but goes further in that it leaves the DEBUG symbol undefined, making the DBG macro empty. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
On 32-bit, the exception prolog for the program check exception doesn't enable interrupts early on. If it is an illegal instruction exception, we read the instruction in order to emulate certain instructions, and the get_user of the instruction triggers a WARN_ON since interrupts are still disabled. This adds a local_irq_enable() to enable interrupts before reading the instruction. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 02 Mar, 2006 9 commits
-
-
Vladimir V. Saveliev authored
This patch fixes bugs in reiserfs where unsigned integers were checked whether they are less then 0. Signed-off-by: Vladimir V. Saveliev <vs@namesys.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Hans Reiser <reiser@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
numa_maps should not scan over huge vmas in order not to cause problems for non IA64 platforms that may have pte entries pointing to huge pages in a variety of ways in their page tables. Add a simple check to ignore vmas containing huge pages. Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
On some platforms readq performs additional work to make sure I/O is done in a coherent way. This is not needed for time retrieval as done by the time interpolator. So we can use readq_relaxed instead which will improve performance. It affects sparc64 and ia64 only. Apparently it makes a significant difference on ia64. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: john stultz <johnstul@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Stefan Seyfried authored
acpi_video_flags variable is unsigned long, so it should be set as such. This actually matters on x86-64. Signed-off-by: Stefan Seyfried <seife@suse.de> Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric Van Hensbergen authored
v9fs has been plagued by an over-complicated approach trying to map Linux dentry semantics to Plan 9 fid semantics. Our previous approach called for aggressive flushing of the dcache resulting in several problems (including wierd cwd behavior when running /bin/pwd). This patch dramatically simplifies our handling of this fid management. Fids will not be clunked as promptly, but the new approach is more functionally correct. We now clunk un-open fids only when their dentry ref_count reaches 0 (and d_delete is called). Another simplification is we no longer seek to match fids to the process-id or uid of the action initiator. The uid-matching will need to be revisited when we fix the security model. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric Van Hensbergen authored
Lucho's atomic create+open fix had a bug in the super block initialization causing all mounts to fail. He was freeing an fcall too early. This patch fixes that oversight. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Latchesar Ionkov authored
In order to assure atomic create+open v9fs stores the open fid produced by v9fs_vfs_create in the dentry, from where v9fs_file_open retrieves it and associates it with the open file. This patch modifies v9fs to use nameidata.intent.open values to do the atomic create+open. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
John Bowler authored
Sync up the recent redboot fix with MTD CVS. It uses the correct swab() functions. Cc: John Bowler <jbowler@acm.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
I seem to have lost this read_unlock(). While we're there, let's turn that interruptible sleep unto uninterruptible, so we don't get a busywait if signal_pending(). (Again. We seem to have a habit of doing this). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 01 Mar, 2006 26 commits
-
-
-
Linus Torvalds authored
-
Greg KH authored
This patch should fixe a problem with eeh_add_device_late() not being defined in the ppc64 build process, causing the build to break. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Mark Fasheh authored
Switch from list_head to hlist_head. Make the size of the hash dependent upon the allocated area, rather than a constant. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Sunil Mushran authored
to prevent confusion when a virtual ip is created on the same interface Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Joel Becker authored
The extent map code has long noticed when the on-disk extent information is corrupt. However, so far it has only returned an error. We should take the filesystem read-only, as it is corrupt. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Joel Becker authored
Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
Orphan dir recovery can deadlock with another process in ocfs2_delete_inode() in some corner cases. Fix this by tracking recovery state more closely and allowing it to handle inode wipes which might deadlock. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Jeff Mahoney authored
This patch finishes cleaning up the node manager allocations if it fails to initialize. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Atsushi Nemoto authored
The 'tick_usec' is USER_HZ period in usec. do_gettimeofday() should use kernel HZ value. Here is a patch for MIPS. It seems m32r, m68k and sparc have same problem though their HZ and USER_HZ are same for now. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Mark Fasheh authored
Remove some prototypes from tcp.h for functions which have long been gone. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
Remove some #ifdef'd out code which was inadvertantly introduced in our initial merge. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Jeff Mahoney authored
The check to determine which format string is appopriate for u64 and friends works in most cases, but UML on x86_64 doesn't define CONFIG_X86_64, so it results in screen fulls of compile-time warnings. This patch fixes it to handle that case. fs/ocfs2/cluster/masklog.h | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Linus Torvalds authored
-
Harald Welte authored
Using this patch, Omnikey CardMan 4000 and 4040 devices automatically get their device nodes created by udev. Also, we now check for (and handle) failure of pcmcia_register_driver() Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Jesse Allen authored
The axnet_cs driver can support the AMB8110 PC Card, so add the id for it. In the old pcmcia-cs config file, this card is listed with the comment "not specific enough". The last entry in the axnet_ids has the same comment. They are disabled, and for good reason as it was originally identified by the MANFID, and that is shared with several cards that use both the pcnet_cs driver and axnet_cs driver. I tried my AMB8110 with pcnet_cs, and found that it works fine, and I cannot find a reason for either, except that the old config file recommended axnet_cs. Signed-off-by: Jesse Allen <the3dfxdude@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Pavel Roskin authored
Don't just use cards with PCMCIA ID 0x0156, 0x0002. Make sure that the vendor string is "Intersil" or "INTERSIL" Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Pavel Roskin authored
This is needed to distinguish Intersil and non-Intersil cards with numeric ID 0x0156, 0x0002. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
David Brownell authored
Add another CF card ID. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
The second pseudo multi-function device of a PCMCIA card may only be configured once the first one is initialized. Therefore, delay the registration of the second device until the first one is initialized. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net
-
-
Linus Torvalds authored
-
-
Darren Jenkins authored
Examples of misuse are 3112 info->init_error = -1; 4440 if ((info->init_error = register_test(info)) < 0) { Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-