- 06 Jan, 2006 40 commits
-
-
Chuck Lever authored
nfs_statfs() generates a log message when GETATTR returns an error. This is usually a useless message. Make it a dprintk. Test plan: None Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Minor cleanup: inlined bit ops in nfs_page.h can be simpler. Test plan: Write-intensive workload against a server that requires COMMITs. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Red Hat found a problem in the error recovery logic in __init_nfs. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Replace ad hoc write parameter sanity checking in nfs_file_direct_write() with a call to generic_write_checks(). This should make the proper checks modulo the O_LARGEFILE flag, and should catch NFSv2-specific limitations by virtue of i_sb->s_maxbytes. Test plan: Posix compliance testing with both NFSv2 and NFSv3. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Use a cred from the nfs4_client->cl_state_owners list. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
In RFC3530, the RENEW operation is allowed to use either the same principal, RPC security flavour and (if RPCSEC_GSS), the same mechanism and service that was used for SETCLIENTID_CONFIRM OR Any principal, RPC security flavour and service combination that currently has an OPEN file on the server. Choose the latter since that doesn't require us to keep credentials for the same principal for the entire duration of the mount. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Convert private implementations in NFSv4 state recovery and delegation code to use kthreads. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Use wait_on_bit() when waiting for state recovery to complete. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Cut down on the number of unnecessary RENEW requests on the wire. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
...and make sure that the "intr" flag also enables SIGHUP and SIGTERM to interrupt RPC calls too (as per the Solaris implementation). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
In order to allow users to interrupt/cancel it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Get rid of some unnecessary intermediate structures Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
When recovering from a delegation recall or a network partition, we need to replay open(O_RDWR), open(O_RDONLY) and open(O_WRONLY) separately. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
A closer reading of RFC3530 reveals that OPEN_DOWNGRADE must always specify a access modes that have been the argument of a previous OPEN operation. IOW: doing OPEN(O_RDWR) and then OPEN_DOWNGRADE(O_WRONLY) is forbidden unless the user called OPEN(O_WRONLY) In order to fix that, we really need to track the three possible open states separately. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
OPEN is a stateful operation, so we must ensure that it always completes. In order to allow users to interrupt the operation, we need to make the RPC call asynchronous, and then wait on completion (or cancel). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Cleanup in preparation for making OPEN calls interruptible by the user. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
The NFSv4 model requires us to complete all RPC calls that might establish state on the server whether or not the user wants to interrupt it. We may also need to schedule new work (including new RPC calls) in order to cancel the new state. The asynchronous RPC model will allow us to ensure that RPC calls always complete, but in order to allow for "synchronous" RPC, we want to add the ability to wait for completion. The waits are, of course, interruptible. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Shrink the RPC task structure. Instead of storing separate pointers for task->tk_exit and task->tk_release, put them in a structure. Also pass the user data pointer as a parameter instead of passing it via task->tk_calldata. This enables us to nest callbacks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Ensure that we always initiate flushing of data before we exit a single-page ->writepage() call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andrew Morton authored
NFS needs to be able to distinguish between single-page ->writepage() calls and multipage ->writepages() calls. For the single-page writepage calls NFS can kick off the I/O within the context of ->writepage(). For multipage ->writepages calls, nfs_writepage() will leave the I/O pending and nfs_writepages() will kick off the I/O when it all has been queued up within NFS. Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
Manual fixup for merge with Jens' "Suspend support for libata", commit ID 9b847548. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This was harmless, but for the case of a device that had no irq pre-defined we would incorrectly suggest that "usepirqmask" might make a difference. It never would, and the message was just confusing people. Reported in the dmesg of Etienne Lorrain. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jens Axboe authored
This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
Also export current (average) speed and status in sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
Writing major:minor to md/new_dev will bind that device to the array. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
drivers/md/md.c: In function `offset_show': drivers/md/md.c:1670: warning: long long unsigned int format, different type arg (arg 3) Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
This the role that a device has in an array can be viewed and set. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
Move the checks - that dev size is never less than array size - into bind_rdev_to_array to make sure it always happens properly (there is one place where currently it doesn't). Also reject any superblock which claims an array size smaller than the device in question can hold. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
If array is active, try to reshape, else just set the value. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
Store this total in superblock (As appropriate), and make it available to userspace via sysfs. Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-