- 12 Apr, 2007 18 commits
-
-
Dmitry Torokhov authored
itmtoch, mtouchusb and touchkitusb have been replaced with composite usbtouchscreen driver and can be removed now. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Torokhov authored
It turns out I had an old 2-button Logitech mouse that responds to Logitech's queries with model of 1. Signed-off-by: -
Peter Stokes authored
The ATI Remote Wonder II can be configured with one of 16 unique logical channels. Allowing up to 16 remotes to be used independently within range of each other. This change adds functionality to configure the receiver and filter the input data to respond or exclude remotes configured with different logical channels. Signed-off-by:
Peter Stokes <linux@dadeos.freeserve.co.uk> Acked-by:
Ville Syrjala <syrjala@sci.fi> Signed-off-by:
-
Dmitry Torokhov authored
Also fix URB leak in gtco_probe error path, formatting fixes. Signed-off-by: -
Eric Piel authored
As the number of keymaps increases and is very unlikely to reduce, this patch helps to reduce memory consumption by declaring all keymaps as __initdata and copying right keymap during DMI detection. On x86 this make the module size at runtime going from 10616 to 9428: a bit more than 1kb saved. Signed-off-by:
Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
-
Eric Piel authored
It turns out that the keymaps in the wistron driver are almost the same, the main difference being some keys which may not exist and leds which might not be present. Therefore it's possible to write a generic keymap which would allow the use of an unknown keyboard with little drawbacks. The user can select it specifying the parameter "keymap=generic". Signed-off-by:
-
Eric Piel authored
Acerhk supports already a lot of laptops. Lets import its database so that everyone can benefit of the work of Olaf Tauber. Only the "tm_new" laptops were imported. "tm_old" laptops could be possible but requires more testing and probably only few laptops are still alive. "dritek" laptops should probably be imported into a different driver. Also compress the keymaps by fitting each entry on an int. Most of the dmi matching was written based on google searches, so it's rather prone to errors. That's why I'm asking people to confirm it works. Support to generate switch input events was added as some laptops indicate lid open/close through this interface. This adds the following hardware: Acer TravelMate 370 Acer TravelMate 380 Acer TravelMate C300 Acer TravelMate C100 Acer TravelMate C110 Acer TravelMate 250 Acer TravelMate 350 Acer TravelMate 620 Acer TravelMate 630 Acer TravelMate 220 Acer TravelMate 230 Acer TravelMate 260 Acer TravelMate 280 Acer TravelMate 360 Acer TravelMate 2100 Acer TravelMate 2410 Acer Aspire 1500 Acer Aspire 1600 Acer Aspire 3020 Acer Aspire 5020 Medion MD 2900 Medion MD 40100 Medion MD 95400 Medion MD 96500 Fujitsu Siemens Amilo 7820 Signed-off-by:
-
Dmitry Torokhov authored
There are mice reporting to logitech's queries with model of 0. Do not claim that these are Logitech mice. Signed-off-by: -
Dmitry Torokhov authored
Disable both keyboard and auxiliary interfaces before switching to legacy mode to prevent atkbd from getting "empty" interrupts. Signed-off-by: -
Dmitry Torokhov authored
Pete Zaitcev reports that with his touchpad, if he lifts the finger and places it elsewhere, the pointer sometimes warps dramatically. This happens because we don't store coordinates unless we detect a touch so sometimes we have stale coordinates in queue (from where the finger left the pad) and averaging makes cursor to jump across the screen. The solution is to always store the latest coordinates. Signed-off-by: -
Dmitry Torokhov authored
Signed-off-by: -
Robert P. J. Day authored
Delete the never-compiled source file drivers/input/power.c, and remove its entry from the corresponding Makefile, as there is no Kconfig file that refers to the config option INPUT_POWER Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Dmitry Torokhov authored
Use printk_ratelimit() to protect ourselves from buggy drivers or devices endlessly generating invalid events. Suggested by Andrew Morton. Signed-off-by: -
Dmitry Torokhov authored
Encode synaptics model in psmouse->model so it will be exported via sysfs as input_dev->id.version and become visible for applications. Signed-off-by: -
Johann Deneux authored
Using usb_unlink_urb can cause iforce_open to fail when called soon after iforce_release. Also updated my email address and replaced calls to printk() by dbg(), warn(), info(), err()... Signed-off-by:
Johann Deneux <johann.deneux@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
Signed-off-by: -
Dmitry Torokhov authored
The naming convention in input handlers was very confusing - client stuctures were called lists, regular lists were also called lists making anyone looking at the code go mad. Signed-off-by: -
Dmitry Torokhov authored
- consolidate code for binding handlers to a device - return error codes from handlers connect() methods back to input core and log failures Signed-off-by:
-
- 16 Mar, 2007 5 commits
-
-
Dmitry Torokhov authored
This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0" messages caused by broken MUX implementation. The box does not have external PS/2 ports so disabling MUX mode is safe. Signed-off-by: -
Helge Deller authored
The following bug happens when insmoding hp_sdc_mlc.ko: HP SDC MLC: Registering the System Domain Controller's HIL MLC. BUG: rwlock recursion on CPU#0, hotplug/1814, 00854734 Backtrace: [<10267560>] _raw_write_lock+0x50/0x88 [<10104008>] _write_lock_irqsave+0x14/0x24 [<008537d4>] hp_sdc_mlc_out+0x38/0x25c [hp_sdc_mlc] [<0084ebd8>] hilse_donode+0x308/0x470 [hil_mlc] [<0084ed80>] hil_mlcs_process+0x40/0x6c [hil_mlc] [<10130f80>] tasklet_action+0x78/0xb8 [<10130cec>] __do_softirq+0x60/0xcc [<1010428c>] __lock_text_end+0x38/0x48 [<10108348>] do_cpu_irq_mask+0xf0/0x11c [<1010b068>] intr_return+0x0/0xc Signed-off-by:Helge Deller <deller@gmx.de> Signed-off-by:
-
Rodolfo Giometti authored
Signed-off-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
Peter Osterlund authored
When using MS protocol the driver should wait for a byte with bit 6 set before assuming that it sees beginning of a data packet. This should allow driver better cope with lost bytes and prevent spurious left/right button events when serial communication is disturbed by a CPU-hungry real-time process. Also fix some formatting. Signed-off-by:
Peter Osterlund <petero2@telia.com> Signed-off-by:
-
Dmitry Torokhov authored
Now that sysfs attributes that were marked for deletion can't access their devices we do not need to set name, phys and uniq to NULL. Signed-off-by:
-
- 15 Mar, 2007 1 commit
-
-
Marvin Raaijmakers authored
Allow drivers to implement their own get and set keycode methods. This will allow drivers to change their keymaps without allocating huge tables covering entire range of possible scancodes. Signed-off-by:
-
- 10 Mar, 2007 1 commit
-
-
Andres Salomon authored
Allow ALPS, LOGIPS2PP, LIFEBOOK, TRACKPOINT and TOUCHKIT protocol extensions of psmouse to be disabled during compilation. This will allow users save some memory when they are sure that they will only use a certain type of mice. Signed-off-by:
Andres Salomon <dilinger@debian.org> Signed-off-by:
-
- 08 Mar, 2007 2 commits
-
-
Dmitry Torokhov authored
Rely on device core to create attribute groups for input devices instead of open-coding it. Signed-off-by: -
Dmitry Torokhov authored
Signed-off-by:
-
- 07 Mar, 2007 2 commits
-
-
Eric Piel authored
Add support for Acer TravelMate 610 to wistron_btns. All special keys are detected, but the 2 leds are not handled (yet). Signed-off-by:
-
Dmitry Torokhov authored
Forcing stream mode after reset confuses some devices (reported by Andrea Arcangeli) so let's take it out - spec says that after reset mouse should already be in stream mode. Signed-off-by:
-
- 01 Mar, 2007 3 commits
-
-
Helge Deller authored
Signed-off-by:
-
Helge Deller authored
- mark some structures const or __read_mostly - hilkbd.c: fix uninitialized spinlock in HIL keyboard driver - hil_mlc.c: use USEC_PER_SEC instead of 1000000 - hp_sdc: bugfix for request_irq()/free_irq() parameters, this prevented multiple load/unload cycles as module Signed-off-by: -
Nicolas Ferre authored
The ads7843 support has now become almost trivial since the last rework. Signed-off-by:
Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
- 18 Feb, 2007 8 commits
-
-
Yoichi Yuasa authored
Tested on Cobalt Qube2. Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
-
Stefan Lucke authored
Based on the touchkit USB and lifebook PS/2 touchscreen driver. The egalax touchsreen controller (PS/2 or USB version) is used in this 7" device: http://www.cartft.com/catalog/il/449Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Dmitry Torokhov authored
They have been marked as __obsolete_setup() for several years, it is time for them to go. Signed-off-by: -
Cyrill V. Gorcunov authored
Do not call release_region() if the code has been compiled without CONFIG_HP300 support. Signed-off-by:
Cyrill V. Gorcunov <gorcunov@gmail.com> Acked-by:
-
Dmitry Torokhov authored
By default threat devices as joysticks with constant force-feedback effect. Signed-off-by: -
Valentin Zagura authored
Signed-off-by:
-
Philipp Zabel authored
This adds support for at least SA1100 and S3C24xx CPUs. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
Now that sysfs attributes return -ENODEV once driver requests their removal we do not need to handle scenario when data is deleted from under our feet and can simplify the code. Signed-off-by:
-
