- 21 Jul, 2007 1 commit
-
-
David Miller authored
This matches the original driver's value and seems to be necessary for some disks on sun4c systems. Reported by Mark Fortescue <mark@mtfhpc.demon.co.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
- 20 Jul, 2007 13 commits
-
-
James Bottomley authored
This fixes up the usage in libsas (which are easy to miss, since they're only in the scsi-misc tree) ... and also corrects the documentation on the point of what these two function pointers actually return. Signed-off-by: -
Gwendal Grignou authored
Update help in Kconfig for mptfc driver to indicate the driver supports Brocade FC 4G HBA. signed-off-by:
Gwendal Grignou <ggrignou@brocade.com> Acked-by:
Eric Moore <eric.moore@lsi.com> Signed-off-by:
-
James Bottomley authored
There's currently no destructor for the bsg components. If you insert and remove the module, you see the bsg devices building up and up. This patch adds the destructor in the correct place in the transport class so that the bsg and request queue are removed just before the device destruction. Acked-by:
FUJITA Tomonori <tomof@acm.org> Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Large code-reuse from ISP24xx, consolidate RISC memory extraction routines during firmware-dump. Signed-off-by:
-
Andrew Vasquez authored
As the "must-check" return-value of pci_set_msi() is never really checked. Signed-off-by:
-
Andrew Vasquez authored
Original from Peter Oruba <peter.oruba@amd.com>. Additional cleanups included. Signed-off-by:
-
Andrew Vasquez authored
In preparation for new ISP types. Signed-off-by:
-
Shyam Sundar authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
In preparation for new ISP types. Signed-off-by:
-
Andrew Vasquez authored
In preparation for new ISP types. Signed-off-by:
-
- 19 Jul, 2007 2 commits
-
-
James Bottomley authored
This patch moves the bsg registration into SCSI so that bsg no longer has a dependency on the scsi_interface_register API. This can be viewed as a temporary expedient until we can get universal bsg binding sorted out properly. Also use the sdev bus_id as the generic bsg name (to avoid clashes with the queue name). Acked-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Kristian Høgsberg authored
Signed-off-by:
Kristian Høgsberg <krh@redhat.com> collapsed with fw-sbp2 patch "Drop cast to non-const char * in host template initialization." from Kristian Høgsberg Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
- 18 Jul, 2007 24 commits
-
-
Swen Schillig authored
improve code for buffer enqueue. easy readability and maintainability. Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Get rid of two 'warning: Using plain integer as NULL pointer'. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Swen Schillig authored
Memory allocated with kmalloc is always initialzed to 0 with memset. Replace the two calls with kzalloc, that already does both steps. Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
This patch adds support for SAS Management Protocol (SMP) passthrough support via bsg. aic94xx can use this. Signed-off-by:
-
FUJITA Tomonori authored
The sas transport class attaches one bsg device to every SAS object (host, device, expander, etc). LLDs can define a function to handle SMP requests via sas_function_template::smp_handler. Signed-off-by:
-
Matthew Wilcox authored
Fix drivers misusing dev_to_shost Some drivers were using dev_to_shost to go from a struct device to the corresponding shost. Unfortunately, dev_to_shost only looks up the tree to find an shost (it's designed to go from a scsi_device or a scsi_target to the parent scsi_host), and these drivers were calling it with the parent of the scsi_host. I've fixed this by saving a pointer to the Scsi_Host in the drvdata, which matches what most scsi drivers do. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Salyzyn, Mark authored
Report VPD inquiry page 0x80 with an unique array creation serial number (CUID). When an array is created, the metadata stored on the physical drives gets an unique serial number. This serial number remains constant through array morphing or migration to other controllers. This patch is a forward port and modification to survive morphing and migration operations, of a similar piece of (un-attributed author) code added to the SLES10 SP1 aacraid driver. To test the results of the patch, observe that /dev/disk/by-id/ entries will show up for the arrays resulting from the udev rules. Also, as per the udev rules, 'scsi_id -g -x -a -s /block/sd? -d /dev/sd?' will report the ID_SERIAL as constructed from the inquiry data. It was reported to me that the 'ADPT' leading the serial number was bad form, that the inquiry vendor field was enough to differentiate the storage uniquely. Subsequent search found that another Adaptec AAC based driver reported the 8 hex serial number only without such adornments, so dropped ADPT to match. Resubmitting the patch with this alteration. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
Salyzyn, Mark authored
Incorrect dma mask was used for blinkled (firmware assert) recovery or user initiated reset during initialization portion. Ensure that all callers of aac_fib_map_free null out the fib allocation references to prevent multiple free. Although serious sounding, no reports of these problems have surfaced... Signed-off-by:
-
Salyzyn, Mark authored
During an Adapter Initiated scan request, the query disk ioctl reports a value of 2 rather than 1 for the valid field. This presents a problem for some legacy management applications. Signed-off-by:
-
Prakash, Sathya authored
Add support for Brocade 410/420 4Gbit FC HBAs. They are re-branded LSI HBAs [LSI7104EP-LC/LSI7204EP-LC] Signed-off-by:
Sathya Prakash <sathya.prakash@lsi.com> Acked-by:
-
Prakash, Sathya authored
The mptspi and mptsas drivers are modified to deregister from transport layer if registration with PCI driver failed Signed-off-by:
-
Prakash, Sathya authored
Adds PCI_VENDOR_ID_BROCADE macro in include/linux/pci_ids.h file. This macro is used in MPT Fusion FC drivers to support Brocade branded FC controllers signed-off-by:
-
Prakash, Sathya authored
New sysfs scsi_host attributes are added to provide information about Firmware version, BIOS version, MPI version and other product related information signed-off-by:
-
Jan Engelhardt authored
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Adrian Bunk authored
seagate_st0x_detect() can become static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
- #include <asm/irq.h> for getting the prototypes of {dis,en}able_irq() - make the needlessly global wd33c93_setup() static Signed-off-by: -
Adrian Bunk authored
This patch contains the following cleanups: - make needlessly global functions static - every file should #include the headers containing the prototypes for it's global functions Signed-off-by:
-
James Bottomley authored
lockdep noticed that with ATA support the port->dev_list_lock was entangled at irq context, so it now needs to become IRQ safe Signed-off-by: -
James Bottomley authored
This one was noticed by Gilbert Wu of Adaptec: The libata core actually does the DMA mapping for you, so there has to be an exception in the device drivers that *don't* do dma mapping for ATA commands. However, since we've already done this, libsas must now dma map any ATA commands that it wishes to issue ... and yes, this is a horrible mess. Additionally, the test in aic94xx for ATA protocols isn't quite right. Signed-off-by: -
Darrick J. Wong authored
ATA devices need special handling for sas_task_abort. If the ATA command came from SCSI, then we merely need to tell SCSI to abort the scsi_cmnd. However, internal commands require a bit more work--we need to fill the qc with the appropriate error status and complete the command, and eventually post_internal will issue the actual ABORT TASK. Signed-off-by: -
Darrick J. Wong authored
The SATL should connect the scsi_cmnd to the sas_task (despite the presence of libata) so that requests to abort scsi_cmnds headed to the ATA device can be processed by the EH and aborted correctly. The abort status should still be propagated from sas -> ata -> scsi. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
Darrick J. Wong authored
When libsas encounters a STP device whose protocol isn't recognized (i.e. not ATA or ATAPI), we should set the ata_device's class to ATA_DEV_UNKNOWN instead of ATA_DEV_ATA. Signed-off-by:
-
Darrick J. Wong authored
A sas_task sent to an ATAPI devices returns SAM_GOOD if successful. Therefore, we should treat this the same way we treat ATA commands that succeed. Signed-off-by:
-
