This fixes http://bugzilla.kernel.org/show_bug.cgi?id=6388
The bug is caused by ip_route_input dereferencing skb->nh.protocol of
the dummy skb passed dow from inet_rtm_getroute (Thanks Thomas for seeing
it). It only happens if the route requested is for a multicast IP
address.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Update serial driver documentation

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3477/1: ARM EABI: undefine removed syscalls
  [ARM] 3475/1: S3C2410: fix spelling mistake in SMDK partition table
  [ARM] 3474/1: S3C2440: USB rate writes wrong var to CLKDIVN

Improve serial driver documentation:
- Remove CVS id.
- Update pointer to reference driver documentation.
- Add comments about new uart_write_console function.
- Add TIOCM_LOOP modem control bit description.
- Add commentry about enable_ms method being called multiple times.
- Add commentry about startup/shutdown method calling.
- Mention that dereferencing port->info after shutdown is invalid.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Avoid confusion for libraries assuming that a given syscall is available
when corresponding symbol is defined.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The at91_cf driver got out of sync with certain changes in the PCMCIA
layer, notably getting rid of some duplication of data ... causing the
version merged to kernel.org to fail compiling.

This patch gives the at91_cf platform device a new iomem resource, using
it so this new pcmcia scheme works.  It also cleans up some whitepsace
bugs that have accumulated over time (mostly too-long lines).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Somehow in the midst of dotting i's and crossing t's during
the merge up to rc1 we wound up keeping __put_task_struct_cb
when it should have been killed as it no longer has any users.
Sorry I probably should have caught this while it was
still in the -mm tree.

Having the old code there gets confusing when reading
through the code and trying to understand what is
happening.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Original patch by Benjamin Herrenschmidt after debugging by Brian Hinz.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Brian Hinz <bphinz@hotmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: fix false section mismatch warnings

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (170 commits)
  commit 3d9dd756
  Author: Zach Brown <zach.brown@oracle.com>
  Date:   Fri Apr 14 16:04:18 2006 -0700
  
      [PATCH] ip_output: account for fraggap when checking to add trailer_len
      
      During other work I noticed that ip_append_data() seemed to be forgetting to
      include the frag gap in its calculation of a fragment that consumes the rest of
      the payload.  Herbert confirmed that this was a bug that snuck in during a
      previous rework.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
  
  commit 08d09997
  Author: Linus Walleij <triad@df.lth.se>
  Date:   Fri Apr 14 16:03:33 2006 -0700
  
      [IRDA]: smsc-ircc2, smcinit support for ALi ISA bridges
      
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  commit 5fdef394
  Author: David S. Miller <davem@sunset.davemloft.net>
  Date:   Fri Apr 14 15:29:32 2006 -0700
  
      [SPARC]: Hook up sys_tee() into syscall tables.
Signed-off-by: David S. Miller <davem@davemloft.net>
  

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (679 commits)
  commit 7676f83a
  Author: James Bottomley <James.Bottomley@steeleye.com>
  Date:   Fri Apr 14 09:47:59 2006 -0500
  
      [SCSI] scsi_transport_sas: don't scan a non-existent end device
      
      Any end device that can't support any of the scanning protocols
      shouldn't be scanned, so set its id to -1 to prevent
      scsi_scan_target() being called for it.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
  
  commit 3c0c25b9
  Author: Moore, Eric <Eric.Moore@lsil.com>
  Date:   Thu Apr 13 16:08:17 2006 -0600
  
      [SCSI] mptfusion - fix panic in mptsas_slave_configure
      
      Driver panic when RAID logical volume was present when driver
      loaded, or when a RAID logical volume was created on the fly.
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (78 commits)
  commit e97b81dd
  Author: Mark M. Hoffman <mhoffman@lightlink.com>
  Date:   Thu Mar 23 16:50:25 2006 +0100
  
      [PATCH] i2c-parport: Make type parameter mandatory
      
      This patch forces the user to specify what type of adapter is present when
      loading i2c-parport or i2c-parport-light.  If none is specified, the driver
      init simply fails - instead of assuming adapter type 0.
      
      This alleviates the sometimes lengthy boot time delays which can be caused
      by accidentally building one of these into a kernel along with several i2c
      slave drivers that have lengthy probe routines (e.g. hwmon drivers).
      
      Kconfig and documentation updated accordingly.
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
  
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (169 commits)
  commit 78a596b4
  Author: Adrian Bunk <bunk@stusta.de>
  Date:   Fri Mar 31 01:38:12 2006 -0800
  
      [PATCH] remove kernel/power/pm.c:pm_unregister()
      
      Since the last user is removed in -mm, we can now remove this long deprecated
      function.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
      Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
  
  commit 21440d31
  Author: David Brownell <david-b@pacbell.net>
  Date:   Sat Apr 1 10:21:52 2006 -0800
  
      [PATCH] dma doc updates
      
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (158 commits)
  commit 4f705ae3
  Author: Bjorn Helgaas <bjorn.helgaas@hp.com>
  Date:   Mon Apr 3 17:09:22 2006 -0700
  
      [PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/
      
      dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64.
      Currently all three arches compile it from arch/i386, which means that ia64
      and x86_64 depend on things in arch/i386 that they wouldn't otherwise care
      about.
      
      This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing
      trailing whitespace) and the associated Makefile changes.  All three
      architectures already set CONFIG_DMI in their top-level Kconfig files.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
      Cc: Andi Kleen <ak@muc.de>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Andrey Panin <pazke@orbita1.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
  ...

During other work I noticed that ip_append_data() seemed to be forgetting to
include the frag gap in its calculation of a fragment that consumes the rest of
the payload.  Herbert confirmed that this was a bug that snuck in during a
previous rework.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Linus Walleij <triad@df.lth.se>

This patch enables support for ALi ISA bridges when we run the smcinit
code.  It is needed to properly configure some Toshiba laptops.
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the STIR421x case, when the firmware upload fails, we need to
unregister_netdev. Otherwise we hit a BUG on free_netdev(), if sysfs
is enabled.
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add module information
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup some code around notifier.  Don't need (void) casts to ignore
return values, and use C90 style initializer. Just ignore unused device
events.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't need the ifdef here since create_proc_entry() is stubbed to
always return NULL.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Run CLIP driver through Lindent script to fix formatting.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

By inspection, the clip idle timer code is racy on SMP.
Here is a safe version of timer management.
Untested, I don't have ATM hardware.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Darren Jenkins <darrenrjenkins@gmail.com> pointed out a
number of false positives where we referenced variables
from a _driver variable.
Fix it by check for that pattern and ignore it.

Randy.Dunlap <rdunlap@xenotime.net> pointed out a similar
set of warnings for a number of scsi drivers.
In scsi world they misname their variables *_template or
*_sht so add these to list of variables that may have references
to .init.text with no warning.

Randy.Dunlap <rdunlap@xenotime.net> also pointed out a scsi driver
with many references to .exit.text from .rodata. This is compiler
generated references and we already ignore these for .init.text, so
ignore them for .exit.text also.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

If Classical IP over ATM module is loaded, its neighbor table gets
populated when permanent neighbor entries are created; but these entries
are not flushed when the device is removed. Since the entry never gets
flushed the unregister of the network device never completes.

This version of the patch also adds locking around the reference to
the atm arp daemon to avoid races with events and daemon state changes.
(Note: barrier() was never really safe)

Bug-reference: http://bugzilla.kernel.org/show_bug.cgi?id=6295Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation to describe asynchronous xfrm events to help people
writting HA code in user space.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Send aevent immediately if we have sent nothing since last timer and
this is the first packet.

Fixes a corner case when packet threshold is very high, the timer low
and a very low packet rate input which is bursty.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch contains the following possible cleanups:
- make the following needlessly global function static:
  - arp.c: arp_rcv()
- remove the following unused EXPORT_SYMBOL's:
  - devinet.c: devinet_ioctl
  - fib_frontend.c: ip_rt_ioctl
  - inet_hashtables.c: inet_bind_bucket_create
  - inet_hashtables.c: inet_bind_hash
  - tcp_input.c: sysctl_tcp_abc
  - tcp_ipv4.c: sysctl_tcp_tw_reuse
  - tcp_output.c: sysctl_tcp_mtu_probing
  - tcp_output.c: sysctl_tcp_base_mss
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Any end device that can't support any of the scanning protocols
shouldn't be scanned, so set its id to -1 to prevent
scsi_scan_target() being called for it.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Since the last user is removed in -mm, we can now remove this long deprecated
function.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This updates the DMA API documentation to address a few issues:

 - The dma_map_sg() call results are used like pci_map_sg() results:
   using sg_dma_address() and sg_dma_len().  That's not wholly obvious
   to folk reading _only_ the "new" DMA-API.txt writeup.

 - Buffers allocated by dma_alloc_coherent() may not be completely
   free of coherency concerns ... some CPUs also have write buffers
   that may need to be flushed.

 - Cacheline coherence issues are now mentioned as being among issues
   which affect dma buffers, and complicate/prevent using of static and
   (especially) stack based buffers with the DMA calls.

I don't think many drivers currently need to worry about flushing write
buffers, but I did hit it with one SOC using external SDRAM for DMA
descriptors:  without explicit writebuffer flushing, the on-chip DMA
controller accessed descriptors before the CPU completed the writes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Asus A6VA notebook was reported to need a PCI quirk to unhide
the SMBus.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I use 2.6.15.6 Linux kernel and found some problems. I have about 100
Linux boxes (all with the same (binary the same) kernel). Last time I have
upgraded all those boxes from 2.4.32 to 2.6.15.6 (first 2.6.15.1, next .2,
.4 and .6) and I have found some problems on VIA based PC's. Probably the
reason of this is that some VIA chipsets are unrecognized by IRQ router.

In line 586 there is: /* FIXME: add new ones for 8233/5 */

There were only a few of chipsets ID's there, some of my VIA chipsets were
not present and kernel used default IRQ router.

I have added three entries, so that the code looks like:

        case PCI_DEVICE_ID_VIA_82C596:
        case PCI_DEVICE_ID_VIA_82C686:
        case PCI_DEVICE_ID_VIA_8231:
        case PCI_DEVICE_ID_VIA_8233A:
        case PCI_DEVICE_ID_VIA_8235:
        case PCI_DEVICE_ID_VIA_8237:
        case PCI_DEVICE_ID_VIA_8237_SATA:
                /* FIXME: add new ones for 8233/5 */
                r->name = "VIA";
                r->get = pirq_via_get;
                r->set = pirq_via_set;
                return 1;
        }

The kernel goes fine but I haven't testes it for weeks, I'm just a moment
after reboot :)
One thing is different (better?):
Using previus kernel I had:
PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0
now I have:
PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 11

Maybe it is good idea to add there some more VIA chipsets?
The ones I have added seem to be OK.

From: Grzegorz Janoszka <Grzegorz@Janoszka.pl>
Acked-by: Martin Mares <mj@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The init function for the RPA PCI Hotplug driver returns -ENODEV in the
case that no hotplug-capable slots are detected in the system.  This is
bad, since hot-capable slots can be added after boot to a purely virtual
POWER partition.  This is also bad because DLPAR I/O operations depend
on the rpaphp module.

Change the rpaphp init module to return success for the case of
partitions that own no hotplug-capable slots at boot.  Such slots can be
dynamically added after boot.
Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Sparse warns about casting to a __bitwise type.  However, it's correct
to do when defining the enum for pci_bus_flags_t, so add a __force to
quiet the warnings.  This will fix getting

    include/linux/pci.h:100:26: warning: cast to restricted type

from sparse all over the build.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The naming of the constant defined for PCI ID 1022:7450 does not seem
to match the information at http://pciids.sourceforge.net/:

	http://pci-ids.ucw.cz/iii/?i=1022

There 1022:7450 is listed as "AMD-8131 PCI-X Bridge" while 1022:7451
is listed as "AMD-8131 PCI-X IOAPIC".  Yet, the current definition for
0x7450 is PCI_DEVICE_ID_AMD_8131_APIC.	It seems to me like that name
should map to 0x7451, while a name like PCI_DEVICE_ID_AMD_8131_BRIDGE
should map to 0x7450.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add MSI(X) configure sapce save/restore in generic PCI helper.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64.
Currently all three arches compile it from arch/i386, which means that ia64
and x86_64 depend on things in arch/i386 that they wouldn't otherwise care
about.

This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing
trailing whitespace) and the associated Makefile changes.  All three
architectures already set CONFIG_DMI in their top-level Kconfig files.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andrey Panin <pazke@orbita1.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Print more diagnostic info to help identify the source of power management
suspend failures.

Example:

usb_hcd_pci_suspend(): pci_set_power_state+0x0/0x1af() returns -22
pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x11b() returns -22
suspend_device(): pci_device_suspend+0x0/0x34() returns -22

Work-in-progress.  It needs lots more suspend_report_result() calls sprinkled
everywhere.

Cc: Patrick Mochel <mochel@digitalimplant.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>