- 01 Feb, 2006 40 commits
-
-
Alexey Dobriyan authored
On alpha-jensen: CC drivers/base/platform.o In file included from include/linux/dma-mapping.h:24, from drivers/base/platform.c:16: include/asm/dma-mapping.h:36: warning: "struct scatterlist" declared inside parameter list include/asm/dma-mapping.h:36: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by:Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alasdair G Kergon authored
drivers/md/dm-table.c:500: warning: comparison of distinct pointer types lacks a cast Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Alasdair G Kergon authored
The snapshot and origin targets are incapable of handling barriers and need to indicate this. Signed-off-by:
-
Jun'ichi "Nick" Nomura authored
Record I/O timing statistics The start time is added to struct dm_io, an existing structure allocated privately internally within dm and attached to each incoming bio. We export disk_round_stats() from block/ll_rw_blk.c instead of creating a private clone. Signed-off-by:
Jun'ichi "Nick" Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
Kevin Corry authored
Record basic I/O statistics for mapped devices. Signed-off-by:
Kevin Corry <kevcorry@us.ibm.com> Signed-off-by:
-
Alasdair G Kergon authored
Reduce substantially the amount of code using PF_MEMALLOC, as envisaged in the original FIXME. If you're using lvm2, for this patch to work correctly you should update to lvm2 version 2.02.01 or later and device-mapper version 1.02.02 or later. Signed-off-by:
-
Patrick Caulfield authored
Clean up the code responsible for the on-disk mirror logs by using the set_le_bit test_le_bit functions of ext2. That makes the BE machines keep the bitmap internally in LE order - it does mean you can't use any other type of operations on the bitmap words but that looks to be OK in this instance. The efficiency tradeoff is very minimal as you would expect for something that ext2 uses. This allows us to remove bits_to_core(), bits_to_disk() and log->disk_bits. Also increment the mirror log disk version transparently to avoid sharing with older kernels that suffered from the 64-bit BE bug. Signed-off-by:
Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by:
-
Alasdair G Kergon authored
Move snapshot metadata loading to happen when the table is created instead of when the device is resumed. Writes to the origin device don't trigger exceptions until each snapshot table becomes active when resume() is called on each snapshot. If you're using lvm2, for this patch to work properly you should update to lvm2 version 2.02.01 or later and device-mapper version 1.02.02 or later. Signed-off-by:
-
Andrew Morton authored
fs/compat.c: In function `compat_sys_pselect7': fs/compat.c:1820: warning: passing arg 5 of `compat_core_sys_select' from incompatible pointer type Signed-off-by:
-
Alexey Dobriyan authored
It's not used. Fix the following on alpha-eb66 as a side effect: In file included from drivers/net/lp486e.c:75: include/asm/io.h:20:1: warning: "SLOW_DOWN_IO" redefined drivers/net/lp486e.c:59:1: warning: this is the location of the previous definition Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Ben Collins authored
Make the platform function interrupt functions actually work. Calls irq_enable() for the first in the list, and irq_disable() for the last. Added *func to struct irq_client so the the user can pass just that to pmf_unregister_irq_client(). Signed-off-by:
Ben Collins <bcollins@ubuntu.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Mikael Pettersson authored
Kernel 2.6.16-rc1 broke the ide-scsi driver: ide-scsi loads but fails to find any devices to bind to. It also triggers a message "Driver 'ide-scsi' needs updating - please use bus_type methods" from the driver core. The IDE core in 2.6.16-rc1 changed the location of an IDE driver's ->probe()/->remove()/->shutdown() methods: they are now in the ide_driver_t struct not in the gen_driver sub-struct. drivers/ide/ was updated for this change but ide-scsi.c wasn't. Hence the breakage. This patch repairs ide-scsi and also eliminates the driver core warning. Signed-off-by:
Mikael Pettersson <mikpe@csd.uu.se> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Acked-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Ashok Raj authored
__meminit has overzelously been modified and crept its way into marking cpuup callbacks as __meminit. Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
In 2.6.16-rc1 there is a small typo introduced by the 'Remove device_node addrs/n_addr' changes which prevents my Powerbook G4 sound from working: Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC). snd: can't request rsrc 0 (Sound Control: 0x80000000:80004fff) ALSA device list: No soundcards found. The patch below fixes it. Of course, the patch fixing the i2c issues ('i2c_smbus_write_i2c_block_data' patch) needs to be applied to in order for the sound to completly work. Signed-off-by:Stelian Pop <stelian@popies.net> Signed-off-by:
-
Miklos Szeredi authored
While asynchronous reads mean a performance improvement in most cases, if the filesystem assumed that reads are synchronous, then async reads may degrade performance (filesystem may receive reads out of order, which can confuse it's own readahead logic). With sshfs a 1.5 to 4 times slowdown can be measured. There's also a need for userspace filesystems to know whether asynchronous reads are supported by the kernel or not. To achive these, negotiate in the INIT request whether async reads will be used and the maximum readahead value. Update interface version to 7.6 If userspace uses a version earlier than 7.6, then disable async reads, and set maximum readahead value to the maximum read size, as done in previous versions. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Andrew Morton authored
An old patch designed to fix http://bugme.osdl.org/show_bug.cgi?id=4497, "getdents gives empty/random result upon signal". If smbfs's readdir() is interupted by a signal, smb_readdir() failed to noticed that and proceeded to treat the unread-into page as valid directory contents. Fix that up by handling the -ERESTARTSYS. Thanks to Stian Skjelstad for reporting and testing. Cc: Stian Skjelstad <stian@nixia.no> Signed-off-by:
-
Ingo Molnar authored
Move CONFIG_DOUBLEFAULT from the main Kconfig menu (!) into its proper place: the "Processor Type and features" submenu. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andreas Gruenbacher authored
A recent patch to Allow run-time selection of NFS versions to export meant that NO nfsacl service versions were exported. This patch restored that functionality. Signed-off-by:
Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Ulrich Drepper authored
Here's the follow-up patch which introduces the prototypes for the new syscalls. There was also a typo in one of the new symbols. Signed-off-by:
Ulrich Drepper <drepper@redhat.com> Signed-off-by:
-
Olaf Hering authored
Older pSeries systems with serial ports dont get any console output after recent changes. CONFIG_ISA does not make sense for CONFIG_PPC_PSERIES because it enables lots of old drivers. Instead, remove the dependency on CONFIG_ISA from the serial port discovery code. Signed-off-by:
Olaf Hering <olh@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andrew Morton authored
We need to use the compat function here. Pointer out by Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
-
Chris Wright authored
Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Andi Kleen authored
Handle more bogus MCFG entries Some Asus P4 boards seem to have broken MCFG tables with only a single entry for busses 0-0. Special case these and assume they mean all busses can be accessed. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Arthur Othieno authored
Richard Knutsson <ricknu-0@student.ltu.se> did the original pci_module_init() cleanups: http://marc.theaimsgroup.com/?l=linux-kernel&m=113330872125068&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113330888507321&w=2 Greg, on it's way upstream, pci_module_init() return sneaked back in for cyblafb? http://marc.theaimsgroup.com/?l=linux-pci&m=113652969209562&w=2 http://marc.theaimsgroup.com/?l=linux-pci&m=113683930220421&w=2 Remove for good. Signed-off-by:Arthur Othieno <apgo@patchbomb.org> Signed-off-by:
-
linas@austin.ibm.com authored
Error checking is scattered through various layers of the dlpar code, leading to a somewhat opaque code structure. This patch consolidates error checking in one routine, simplifying the code a tad. There's also some whitespace cleanup here too. Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Acked-by:
John Rose <johnrose@austin.ibm.com> Signed-off-by:
-
linas@austin.ibm.com authored
Minor cleanup. Move structure initializer to bottom of file, this allows elimination of eyeball-strain-inducing forward declarations. Signed-off-by:
-
linas@austin.ibm.com authored
Minor cleanup. Add the prefix rpaphp_* to several generic-sounding routines. Remove rpaphp_remove_slot(), which is a one-liner. Signed-off-by:
-
linas@austin.ibm.com authored
Remove general baroqueness. The function rpaphp_enable_pci_slot() has a fairly simple logic structure, once all of the debug printk's are removed. Its called from only one place, and that place also has a very simple structure once he printk's are removed. Merge the two together. Signed-off-by:
-
linas@austin.ibm.com authored
Remove general baroqueness. The function rpaphp_unconfig_pci_adapter() is really just three lines of code, once all the dbg printks are removed. And its called in only one place. So replace the call by the thre lines. Also, provide proper semaphore locking in the affected function disable_slot() Signed-off-by:
-
linas@austin.ibm.com authored
The function rpaphp_eeh_remove_bus_device() is a dupe of eeh_remove_bus_device(). Remove it. Signed-off-by:
-
linas@austin.ibm.com authored
Remove general baroqueness. The function rpaphp_config_pci_adapter() is really just one line of code, once all the dbg printks are removed. And its called in only one place. So replace the call by the one line. Signed-off-by:
-
linas@austin.ibm.com authored
The function rpaphp_fixup_new_pci_devices() has been migrated to pcibios_fixup_new_pci_devices() in arch/powerpc/platforms/pseries/pci_dlpar.c This patch removes the old version. Signed-off-by:
-
