- 05 Jan, 2006 40 commits
-
-
Dominik Brodowski authored
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Merge the suspend and resume methods for 16-bit PCMCIA cards into the device model -- for both runtime power management and suspend to ram/disk. Bugfix in ds.c by Richard Purdie Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Daniel Ritz authored
Make the bridge specific initialization code config options depending on CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are available. Disabling all of the specific tweaks cuts off more than half of yenta_socket.ko. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Andrew Morton authored
Also return a value if CONFIG_PCMCIA_PROBE is not set. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Add a return value to pcmcia_validate_mem. Only if we have enough memory available to map the CIS, we should proceed in trying to determine information about the device. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
The .get_socket callback is never used by the PCMCIA core, therefore remove it. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Remove the register_callback declaration in struct pccard_operations as it is unused. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Daniel Ritz authored
Don't waste cpu time in yenta interrupt handler when the interrupt was for another device. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Pavel Machek authored
Fix macro abuse in pcmcia. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds authored
Trivial manual merge fixup for usb_find_interface clashes.
-
Chuck Ebbert authored
According to the manual, INT 6 is "invalid opcode", not "invalid operand". Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Deepak Saxena authored
The IXP4xx driver bails out on all A0 CPUs, but it should only do so on IXP42x as IXP46x has functioning HW. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
-
-
-
Linus Torvalds authored
-
Linus Torvalds authored
-
-
-
Linus Torvalds authored
-
Linus Torvalds authored
In particular, allow over-large read- or write-requests to be downgraded to a more reasonable range, rather than considering them outright errors. We want to protect lower layers from (the sadly all too common) overflow conditions, but prefer to do so by chopping the requests up, rather than just refusing them outright. Cc: Peter Anvin <hpa@zytor.com> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kay Sievers authored
Recent udev versions don't longer cover bad sysfs timing with built-in logic. Explicit rules are required to do that. For net devices, the following is needed: ACTION=="add", SUBSYSTEM=="net", WAIT_FOR_SYSFS="address" to handle access to net device properties from an event handler without races. This patch changes the main net attributes to be created by the driver core, which is done _before_ the event is sent out and will not require the stat() loop of the WAIT_FOR_SYSFS key. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Adrian Bunk authored
This patch #if 0's an unused global function. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Steven Rostedt authored
I noticed that if sysfs_make_dirent fails to allocate the sd, then a null will be passed to sysfs_put. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Block devices need to add the block device name to the symlink they put in the device directory, otherwise multiple symlinks of the same name can be created. This matches the class system, which works the same way, we just forgot to convert block at the same time. Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Thanks to drivers making their id tables __devinit, we can't allow userspace to bind or unbind drivers from devices manually through sysfs. So we only allow this if CONFIG_HOTPLUG is enabled. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Torokhov authored
Driver core: rearrange exports in platform.c The new way is to specify export right after symbol definition. Rearrange exports to follow new style to avoid mixing two styles in one file. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Torokhov authored
Driver core: add platform_device_del function Having platform_device_del90 allows more straightforward error handling code in drivers registering platform devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Rusty Russell authored
Fix build when scripts/mod/file2alias.c includes linux/input.h, which tries to include /usr/include/linux/mod_devicetable.h: In file included from scripts/mod/file2alias.c:40: include/linux/input.h:21:35: linux/mod_devicetable.h: No such file or directory make[2]: *** [scripts/mod/file2alias.o] Error 1 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Rusty Russell authored
Here's the patch for modalias support for input classes. It uses comma-separated numbers, and doesn't describe all the potential keys (no module currently cares, and that would make the strings huge). The changes to input.h are to move the definitions needed by file2alias outside __KERNEL__. I chose not to move those definitions to mod_devicetable.h, because there are so many that it might break compile of something else in the kernel. The rest is fairly straightforward. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kay Sievers authored
IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ... Add MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and ide-tape, to autoload these modules depending on the probed media type of the IDE device. It is used by udev and replaces the former agent shell script of the hotplug package, which was required to lookup the media type in the proc filesystem. Using proc was racy, cause the media file is created after the hotplug event is sent out. The module autoloading does not take any effect, until something like the following udev rule is configured: SUBSYSTEM=="ide", ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" The module ide-scsi will not be autoloaded, cause it requires manual configuration. It can't be, and never was supported for automatic setup in the hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported media types, would just lead to a default blacklist entry anyway. $ modinfo ide-disk filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko description: ATA DISK Driver alias: ide:*m-disk* license: GPL ... $ modprobe -vn ide:m-disk insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko $ cat /sys/bus/ide/devices/0.0/modalias ide:m-disk It also adds attributes to the IDE device: $ tree /sys/bus/ide/devices/0.0/ /sys/bus/ide/devices/0.0/ |-- bus -> ../../../../../../../bus/ide |-- drivename |-- media |-- modalias |-- power | |-- state | `-- wakeup `-- uevent $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media} ide:m-disk hda disk Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
akpm@osdl.org authored
lib/lib.a(kobject_uevent.o)(.text+0x25f): In function `kobject_uevent': : undefined reference to `__alloc_skb' lib/lib.a(kobject_uevent.o)(.text+0x2a1): In function `kobject_uevent': : undefined reference to `skb_over_panic' lib/lib.a(kobject_uevent.o)(.text+0x31d): In function `kobject_uevent': : undefined reference to `skb_over_panic' lib/lib.a(kobject_uevent.o)(.text+0x356): In function `kobject_uevent': : undefined reference to `netlink_broadcast' lib/lib.a(kobject_uevent.o)(.init.text+0x9): In function `kobject_uevent_init': : undefined reference to `netlink_kernel_create' make: *** [.tmp_vmlinux1] Error 1 Netlink is unconditionally enabled if CONFIG_NET, so that's OK. kobject_uevent.o is compiled even if !CONFIG_HOTPLUG, which is lazy. Let's compound the sin. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kumar Gala authored
There are cases in which a device's memory mapped registers overlap with another device's memory mapped registers. On several PowerPC devices this occurs for the MDIO bus, whose registers tended to overlap with one of the ethernet controllers. By switching from request_resource to insert_resource we can register the MDIO bus as a proper platform device and not hack around how we handle its memory mapped registers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Frank Pavlic authored
The klist reference counting in the find functions that use klist_iter_init_node is broken. If the function (for example driver_find_device) is called with a NULL start object then everything is fine, the first call to next_device()/klist_next increases the ref-count of the first node on the list and does nothing for the start object which is NULL. If they are called with a valid start object then klist_next will decrement the ref-count for the start object but nobody has incremented it. Logical place to fix this would be klist_iter_init_node because the function puts a reference of the object into the klist_iter struct. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Frank Pavlic <pavlic@de.ibm.com> Cc: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Paul Jackson authored
The first of these changes s/hotplug/uevent/ was needed to compile sn2_defconfig (ia64/sn). The other three files changed are blind changes of all remaining bus_type.hotplug references I could find to bus_type.uevent. This patch attempts to finish similar changes made in the gregkh-driver-kill-hotplug-word-from-driver-core Nov 22 patch. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
With modules, dynamic /dev, and uevents, people really want CONFIG_HOTPLUG to be enabled in their kernels. If not, they can still disable it, but it is discouraged. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kay Sievers authored
Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-