- 17 Jun, 2005 1 commit
-
-
Ingo Molnar authored
Do all timer zapping in exit_itimers. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 16 Jun, 2005 14 commits
-
-
Linus Torvalds authored
-
Nicolas Pitre authored
Patch from Nicolas Pitre Without this some devices fail to work again after a suspend event. Signed-off-by: Nicolas Pitre Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
Linus Torvalds authored
-
Catalin Marinas authored
Patch from Catalin Marinas The initial IB2 addresses did not depend on the IB2 base. This patch defines them as (VERSATILE_IB2_BASE + offset). Signed-off-by: Catalin Marinas Signed-off-by: -
Catalin Marinas authored
Patch from Catalin Marinas The GPIO base for Integrator/CP is different from the Integrator/AP. This patch sets the correct value for INTEGRATOR_GPIO_BASE. Signed-off-by: Catalin Marinas Signed-off-by: -
Catalin Marinas authored
Patch from Catalin Marinas The current red and blue colours on the Versatile CLCD are reversed when the 5:6:5 mode is used. The patch sets the proper bit in the SYS_CLCD register value. Signed-off-by: Catalin Marinas Signed-off-by: -
Linus Torvalds authored
-
Oliver Neukum authored
Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Dmitry Torokhov authored
It looks like logic for enabling hardware tapping in ALPS driver was inverted and we enable it only if it was already enabled by BIOS or firmware. I have a confirmation from one user that the patch below fixes the problem for him and it might be beneficial if we could get it into 2.6.12. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Daniel Jacobowitz authored
The ELF core dump code has one use of off_t when writing out segments. Some of the segments may be passed the 2GB limit of an off_t, even on a 32-bit system, so it's important to use loff_t instead. This fixes a corrupted core dump in the bigcore test in GDB's testsuite. Signed-off-by:
Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by:
-
Alexandre Oliva authored
This fixed a problem that showed up in the Fedora development tree a few weeks before the Fedora Core 4 release, initially as slab corruption, later as hard crashes on boot up, when slab debugging was disabled for the release. More details on the history at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=158424 The problem is caused by sbp2's use of scsi_host->hostdata[0] to hold a scsi_id, without explicitly requesting space for it. Since hostdata is declared as a zero-sized array, we don't get any such space by default, so it must be explicitly requested. The patch below implements just that. Signed-off-by:
Alexandre Oliva <aoliva@redhat.com> Cc: Jody McIntyre <scjody@modernduck.com> Signed-off-by:
-
Tejun Heo authored
__elv_add_request(). rq.count[READ] + rq.count[WRITE] can increase more than one if another thread has allocated a request after the current request is allocated or in_flight could have changed resulting in larger-than-one change of nrq, thus breaking the threshold mechanism. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
Tejun Heo <htejun@gmail.com>
-
Tejun Heo authored
nothing. Signed-off-by:
-
David S. Miller authored
This fixes various crashes on 64-bit when using this module. Based upon a patch by Juergen Kreileder <jk@blackdown.de>. Signed-off-by:
David S. Miller <davem@davemloft.net> ACKed-by:
Patrick McHardy <kaber@trash.net>
-
- 15 Jun, 2005 1 commit
-
-
Olaf Hering authored
enable cpusets enable new lpfc and jsm drivers enable new dm-multipath leave new agp disabled disable rivafb, it does not handle the cards in G5 models (FX5200 as example) the new nvidiafb doesnt work on bigendian, yet Signed-off-by:
Olaf Hering <olh@suse.de> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
- 14 Jun, 2005 16 commits
-
-
Paul Mackerras authored
Here is a patch to update the example configs in arch/ppc64/configs. Signed-off-by:
-
Karsten Wiese authored
Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Present in ALSA cvs Signed-off-by:
Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Chris Wright <chrisw@osdl.org> Signed-off-by:
-
Karsten Wiese authored
Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Present in ALSA cvs Signed-off-by:
-
Randy Dunlap authored
Module needs a license to prevent kernel tainting. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Thomas Hood authored
This patch causes the ignore_normal_resume flag to be set slightly earlier, before there is a chance that the apm driver will receive the normal resume event from the BIOS. (Addresses Debian bug #310865) Signed-off-by:
Thomas Hood <jdthood@yahoo.co.uk> Acked-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Markus Lidel authored
Fixed freeing of event memory in i2o_block_event() Signed-off-by:
Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by:
-
Jon Smirl authored
It prints out x,x instead of x,y. Signed-off-by:
Jon Smirl <jonsmirl@gmail.com> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by:
-
Jan Kara authored
On one path, cond_resched_lock() fails to return true if it dropped the lock. We think this might be causing the crashes in JBD's log_do_checkpoint(). Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Olof Johansson authored
On 64-bit machines, PCI_BASE_ADDRESS_MEM_MASK and other mask constants passed to pci_size() are 64-bit (for example ~0x0fUL). However, pci_size does comparisons between the u32 arguments and the mask, which will fail even though any result from pci_size is still just 32-bit. Changing the mask argument to u32 seems the obvious thing to do, since all arithmetic in the function is 32-bit and having a larger mask makes no sense. This triggered on a PPC64 system here where an adapter (VGA, as it happened) had a memory region base of 0xfe000000 and a sz of the same, matching the if (max == maxbase ...) test at the bottom of pci_size but failing the mask comparison. Quite a corner case which I guess explains why we haven't seen it until now. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Greg KH <greg@kroah.com> Signed-off-by:
-
Jeff Dike authored
This patch merges a lot of duplicated code in the slip and slirp drivers, abstracts out the slip protocol, and makes the slip driver work in 2.6. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Jeff Dike authored
Convert the boot-time host ptrace testing from clone to fork. They were essentially doing fork anyway. This cleans up the code a bit, and makes valgrind a bit happier about grinding it. Signed-off-by:
-
Jeff Dike authored
Fix a build failure when CONFIG_MODE_SKAS is disabled and make a Makefile comment fit in 80 columns. Signed-off-by:
-
Jeff Dike authored
A few files include the same header twice. Signed-off-by:
-
-
Patrick McHardy authored
Signed-off-by:
-
Linus Torvalds authored
This adds a clause that notes explicitly that the person doing the sign-off knows that the project (and his sign-off) is public and will possibly get archived and re-distributed.
-
- 13 Jun, 2005 8 commits
-
-
-
J. Simonetti authored
This patch alows you to change the source address of icmp error messages. It applies cleanly to 2.6.11.11 and retains the default behaviour. In the old (default) behaviour icmp error messages are sent with the ip of the exiting interface. The new behaviour (when the sysctl variable is toggled on), it will send the message with the ip of the interface that received the packet that caused the icmp error. This is the behaviour network administrators will expect from a router. It makes debugging complicated network layouts much easier. Also, all 'vendor routers' I know of have the later behaviour. Signed-off-by: -
Sridhar Samudrala authored
link local address. Signed-off-by:
Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
-
Neil Horman authored
Signed-off-by:
Neil Horman <nhorman@redhat.com> Signed-off-by:
-
Vladislav Yasevich authored
Signed-off-by:
Vladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Neil Horman authored
Signed-off-by:
-
Vladislav Yasevich authored
Signed-off-by:
-
Rémi Denis-Courmont authored
Userland layer-2 tunneling devices allocated through the TUNTAP driver (drivers/net/tun.c) have a type of ARPHRD_NONE, and have no link-layer address. The kernel complains at regular interval when IPv6 Privacy extension are enabled because it can't find an hardware address : Dec 29 11:02:04 auguste kernel: __ipv6_regen_rndid(idev=cb3e0c00): cannot get EUI64 identifier; use random bytes. IPv6 Privacy extensions should probably be disabled on that sort of device. They won't work anyway. If userland wants a more usual Ethernet-ish interface with usual IPv6 autoconfiguration, it will use a TAP device with an emulated link-layer and a random hardware address rather than a TUN device. As far as I could fine, TUN virtual device from TUNTAP is the very only sort of device using ARPHRD_NONE as kernel device type. Signed-off-by:
Rmi Denis-Courmont <rdenis@simphalempin.com> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
