- 14 Nov, 2005 40 commits
-
-
Ricardo Cerqueira authored
- Fix nasty IRQ hook bug. - Fix multiple board support in saa7134-alsa - Minor comment updates - SAA7134/ALSA IRQ management improvements - Removed superfluous stop_dma() from saa7134-alsa IRQ handler Signed-off-by:
Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Mauro Carvalho Chehab authored
Added compiling options for wm8775 and cs53l32a chips. Signed-off-by:
-
Jesper Juhl authored
Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
George Anzinger authored
It would appear that the timespec normalize code has an off by one error. Found in three places. Thanks to Ben for spotting. Signed-off-by: George Anzinger<george@mvista.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Kylene Jo Hall authored
Use schedule_work() to avoid down()-in-timer-handler problem. Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Kylene Jo Hall authored
- Use ~, not ! - Remove unneeded cast Signed-off-by:
-
Kylene Jo Hall authored
This is the patch to support TPMs on power ppc hardware. It has been reworked as requested to remove the need for messing with the io page mask by just using ioremap. Signed-off-by:
-
Kylene Jo Hall authored
Some work is needed in the tpm device driver to discover the TPM out of the device tree rather than based on set address on Power PPC. This patch exports a couple of functions for the parsing. Signed-off-by:
-
Diego Calleja authored
Signed-off-by:
-
matthieu castet authored
Wasn't checking return error and forgot to free in some case. Signed-off-by:
Matthieu CASTET <castet.matthieu@free.fr> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
allnoconfig: In file included from fs/super.c:28: include/linux/acct.h:173: warning: `TICK_NSEC' is not defined Signed-off-by:
-
Johann Lombardi authored
ext2_warning() already adds a newline. Signed-off-by:
Johann Lombardi <johann.lombardi@bull.net> Signed-off-by:
-
Zach Brown authored
put_ioctx's refcount debugging was doing an atomic_read after dropping its reference when it wasn't the last ref, leaving a tiny race for another freeing thread to sneak into. This shifts the debugging before the ops, uses BUG_ON, and reformats the defines a little. Sadly, moving to inlines increased the code size but this change decreases the code size by a whole 9 bytes :) Signed-off-by:
Zach Brown <zach.brown@oracle.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Zach Brown authored
aio: replace locking comments with assert_spin_locked() Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Zach Brown authored
Sync iocbs have a life cycle that don't need a kioctx. Their retrying, if any, is done in the context of their owner who has allocated them on the stack. The sole user of a sync iocb's ctx reference was aio_complete() checking for an elevated iocb ref count that could never happen. No path which grabs an iocb ref has access to sync iocbs. If we were to implement sync iocb cancelation it would be done by the owner of the iocb using its on-stack reference. Removing this chunk from aio_complete allows us to remove the entire kioctx instance from mm_struct, reducing its size by a third. On a i386 testing box the slab size went from 768 to 504 bytes and from 5 to 8 per page. Signed-off-by:
-
Kirill Korotaev authored
This fixes deadlock of stop_machine() vs. synchronous IPI send. The problem is that stop_machine() disables interrupts before disabling preemption on other CPUs. So if another CPU is preempted and then calls something like flush_tlb_all() it will deadlock with CPU doing stop_machine() and which can't process IPI due to disabled IRQs. I changed stop_machine() to do the same things exactly as it does on other CPUs, i.e. it should disable preemption first on _all_ CPUs including itself and only after that disable IRQs. Signed-off-by:
Kirill Korotaev <dev@sw.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Andrey Savochkin" <saw@sawoct.com> Signed-off-by:
-
Clemens Buchacher authored
It's deprecated. Use "%s", __FUNCTION__ instead. Signed-off-by:
Clemens Buchacher <drizzd@aon.at> Signed-off-by:
Maximilian Attems <janitor@sternwelten.at> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Nick Piggin authored
Introduce an atomic_inc_not_zero operation. Make this a special case of atomic_add_unless because lockless pagecache actually wants atomic_inc_not_negativeone due to its offset refcount. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Nick Piggin authored
Introduce an atomic_cmpxchg operation. Signed-off-by:
-
Nick Piggin authored
- Make cmpxchg generally available on the i386 platform. - Provide emulation of cmpxchg suitable for uniprocessor if built and run on 386. From: Christoph Lameter <clameter@sgi.com> - Cut down patch and small style changes. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Ingo Molnar authored
Make the box usable for interactive work when running the RCU torture test, by renicing the RCU torture-test threads to +19 by default. Kthreads run at nice -5 by default. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Paul Mundt authored
Currently per_cpu_ptr() doesn't really do anything with 'cpu' in the UP case. This is problematic in the cases where this is the only place the variable is referenced: CC kernel/workqueue.o kernel/workqueue.c: In function `current_is_keventd': kernel/workqueue.c:460: warning: unused variable `cpu' Signed-off-by:
-
Luiz Fernando Capitulino authored
fs/proc/task_mmu.c:198:33: warning: Using plain integer as NULL pointer Signed-off-by:
Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
Paul Fulghum authored
Update synclink to use DMA mapping API. This removes warning about isa_virt_to_bus() usage on architectures other than i386 Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Denis Lunev authored
This patch fixes lost referrence on ext3 current handle in ext3_journalled_writepage(). Signed-Off-By:
Denis Lunev <den@sw.ru> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by:
-
Heiko Carstens authored
This patch reverts commit c33880aa since it's not needed anymore. As pointed out by Roland McGrath the real fix is to deliver all signals before returning to user space. See http://www.ussg.iu.edu/hypermail/linux/kernel/0509.2/0683.html A fix for s390 has been merged. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Fix some exit path bugs in the daemon driver. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
The access_ok_tt() macro is bogus, in that a read access is unconditionally considered valid. I couldn't find in SCM logs the introduction of this check, but I went back to 2.4.20-1um and the definition was the same. Possibly this was done to avoid problems with missing set_fs() calls, but there can't be any I think because they would fail with SKAS mode. TT-specific code is still to check. Also, this patch joins common code together, and makes the "address range wrapping" check happen for all cases, rather than for only some. This may, possibly, be reoptimized at some time, but the current code doesn't seem clever, just confused. * Important: I've also had to change references to access_ok_{tt,skas} back to access_ok - the kernel wasn't that happy otherwise. Signed-off-by: -
Paolo 'Blaisorblade' Giarrusso authored
Since the 4th param is unused, remove it altogether. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
We were using a long series of (stupid) wrappers which all call generic_console_write(). Since the wrappers only change the 4th param, which is unused by the called proc, remove them and call generic_console_write() directly. If needed at any time in the future to reintroduce this stuff, the member could be moved to a generic struct, to avoid this duplicated handling. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
printk clears the host errno (I verified this in debugging and it's reasonable enough, given that it ends via a write call on some fd, especially since printk() goes on /dev/tty0 which is often the host stdout). So save errno earlier. There's no reason to change the printk calls to use -err rather than errno - the assignment can't clear errno. And in the first failure path, we used to return 0 too (and this time more clearly), which is totally wrong. 0 is a success fd, which is then registered and gives a "registering fd twice" warning. Finally, fix up some whitespace. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
A few fixups - show the new submenu only for x86 subarchitecture (it does not make sense to show it for x86_64 users) and remove X86_CMPXCHG, which is now a duplicate of Kconfig.i386, even though Kconfig doesn't complain (we also miss the dependency on !M386 CPU). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Remove a stone-age comment (UM *does* have a MMU, i.e. the host), and fix a dependency (introduced in commit 02edeb58) to do what was intended. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
The below warning was added in place of pte_mkyoung(); if (is_write) pte_mkdirty(); In fact, if the PTE is not marked young/dirty, our dirty/accessed bit emulation would cause the TLB permission not to be changed, and so we'd loop, and given we don't support preemption yet, we'd busy-hang here. However, I've seen this warning trigger without crashes during a loop of concurrent kernel builds, at random times (i.e. like a race condition), and I realized that two concurrent faults on the same page, one on read and one on write, can trigger it. The read fault gets serviced and the PTE gets marked writable but clean (it's possible on a shared-writable mapping), while the generic code sees the PTE was already installed and returns without action. In this case, we'll see another fault and service it normally. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
In Uml, many definitions are borrowed from underlying subarch headers (with #include <asm/arch/stuff.h>). And it has become annoying to keep switching tag files all time, so by default index the underlying subarch headers too. Btw, it adds negligible space to the tags file (less than 1M surely, IIRC it was around 500k over 40M). Finally, preserve the ALLSOURCE_ARCHS command line option (I hope) - if it is set, it is used for headers too as before. But check my construct please, I didn't test this. Signed-off-by:
-
Roman Zippel authored
Remove task_work structure, use the standard thread flags functions and use shifts in entry.S to test the thread flags. Add a few local labels to entry.S to allow gas to generate short jumps. Finally it changes a number of inline functions in thread_info.h to macros to delay the current_thread_info() usage, which requires on m68k a structure (task_struct) not yet defined at this point. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Al Viro authored
a) added embedded thread_info [m68k processor.h] b) added missing symbols in asm-offsets.c c) task_thread_info() and friends in asm-m68k/thread_info.h d) made m68k thread_info.h included by m68k processor.h, not the other way round. Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Al Viro authored
a) in smp_lock.h #include of sched.h and spinlock.h moved under #ifdef CONFIG_LOCK_KERNEL. b) interrupt.h now explicitly pulls sched.h (not via smp_lock.h from hardirq.h as it used to) c) in three more places we need changes to compensate for (a) - one place in arch/sparc needs string.h now, hardirq.h needs forward declaration of task_struct and preempt.h needs direct include of thread_info.h. d) thread_info-related helpers in sched.h and thread_info.h put under ifndef __HAVE_THREAD_FUNCTIONS. Obviously safe. Signed-off-by:
-
Al Viro authored
encapsulates the rest of arch-dependent operations with thread_info access. Two new helpers - setup_thread_stack() and end_of_stack(). For normal case the former consists of copying thread_info of parent to new thread_info and the latter returns pointer immediately past the end of thread_info. Signed-off-by:
-
Al Viro authored
new helper - task_thread_info(task). On platforms that have thread_info allocated separately (i.e. in default case) it simply returns task->thread_info. m68k wants (and for good reasons) to embed its thread_info into task_struct. So it will (in later patch) have task_thread_info() of its own. For now we just add a macro for generic case and convert existing instances of its body in core kernel to uses of new macro. Obviously safe - all normal architectures get the same preprocessor output they used to get. Signed-off-by:
-
