- 09 Mar, 2006 10 commits
-
-
Ralf Baechle authored
At times gcc will place bits of __exit functions into .rodata. If compiled into the kernle itself we used to discard .exit.text - but not the bits left in .rodata. While harmless this did at times result in a large number of warnings. So until gcc fixes this, discard .exit.text at runtime. Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
In case a particular system doesn't support highmem the runtime checks will ensure nothing bad is going to happen. Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
What: Support for NEC DDB5074 and DDB5476 evaluation boards. When: June 2006 Why: Board specific code doesn't build anymore since ~2.6.0 and no users have complained indicating there is no more need for these boards. This should really be considered a last call. Who: Ralf Baechle <ralf@linux-mips.org> -
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: Fix various syscall/signal/swapcontext bugs [PATCH] powerpc: incorrect rmo_top handling in prom_init [PATCH] powerpc: Fix incorrect pud_ERROR() message [PATCH] powerpc: Expose SMT and L1 icache snoop userland features [PATCH] powerpc: Fix windfarm_pm112 not starting all control loops [PATCH] powerpc: Fix old g5 issues with windfarm powerpc32: Fix timebase synchronization on 32-bit powermacs powerpc: Turn off verbose debug output in powermac platform functions powerpc: Fix might-sleep warning in program check exception handler
-
Andi Kleen authored
The low level PCI DMA mapping functions should handle it in most cases. This should fix problems with depleting the DMA zone early. The old code used precious GFP_DMA memory in many cases where it was not needed. Signed-off-by:
Andi Kleen <ak@suse.de> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
ATI chipsets tend to generate double timer interrupts for the local APIC timer when both the 8254 and the IO-APIC timer pins are enabled. This is because they route it to both and the result is anded together and the CPU ends up processing it twice. This patch changes check_timer to disable the 8254 routing for interrupt 0. I think it would be safe on all chipsets actually (i tested it on a couple and it worked everywhere) and Windows seems to do it in a similar way, but to be conservative this patch only enables this mode on ATI (and adds options to enable/disable too) Ported over from a similar x86-64 change. I reused the ACPI earlyquirk infrastructure for the ATI bridge check, but tweaked it a bit to work even without ACPI. Inspired by a patch from Chuck Ebbert, but redone. Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET] compat ifconf: fix limits
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: Merge branch 'work-fixes' V4L/DVB (3413): Typos grab bag of the month V4L/DVB (3403): Workaround to fix initialization for Nexus CA Merge branch 'work-fixes' V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support V4L/DVB (3399): ELSA EX-VISION 500TV: fix incorrect PCI subsystem ID V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146) V4L/DVB (3300a): Removing personal email from DVB maintainers V4L/DVB (3385): Dvb: fix __init/__exit section references in av7110 driver V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probe V4L/DVB (3354): Fix maximum for the saturation and contrast controls. V4L/DVB (3352): Cxusb: fix lgdt3303 naming V4L/DVB (3348): Fixed saa7134 ALSA initialization with multiple cards V4L/DVB (3347): Pinnacle PCTV 40i: add filtered Composite2 input V4L/DVB (3341): Upstream sync - make 2 structs static V4L/DVB (3340): Make a struct static V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanups V4L/DVB (3336): Bt8xx documentation authors fix
-
Randy Dunlap authored
A recent change to compat. dev_ifconf() in fs/compat_ioctl.c causes ifconf data to be truncated 1 entry too early when copying it to userspace. The correct amount of data (length) is returned, but the final entry is empty (zero, not filled in). The for-loop 'i' check should use <= to allow the final struct ifreq32 to be copied. I also used the ifconf-corruption program in kernel bugzilla #4746 to make sure that this change does not re-introduce the corruption. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 08 Mar, 2006 28 commits
-
-
Michael Matz authored
While testing kexec and kdump we hit problems where the new kernel would freeze or instantly reboot. The easiest way to trigger it was to kexec a kernel compiled for CONFIG_M586 on an athlon cpu. Compiling for CONFIG_MK7 instead would work fine. The patch fixes a few problems with the kexec inline asm. Signed-off-by:
Chris Mason <mason@suse.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
Matt Mackall <mpm@selenic.com> Tested-by:
Anders K. Pedersen <akp@cohaesio.com> Signed-off-by:
-
Jack Steiner authored
kmem_cache_init() incorrectly assumes that the cache_cache object will fit in an order 0 allocation. On very large systems, this is not true. Change the code to try larger order allocations if order 0 fails. Signed-off-by:
Jack Steiner <steiner@sgi.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Latchesar Ionkov authored
Miscellaneous fixes related to accessing uninitialized variables or memory that was already freed. Signed-off-by:
Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org> Signed-off-by:
-
Shaohua Li authored
The x86_model calculation also applies for family 6. early_cpu_detect does the right thing, but generic_identify misses. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: "Seth, Rohit" <rohit.seth@intel.com> Acked-by:
Andi Kleen <ak@muc.de> Signed-off-by:
-
Horst Hummel authored
DASD allows to open a device as soon as gendisk is registered, which means the device is a fake device (capacity=0) and we do know nothing about blocksize and partitions at that point of time. In case the device is opened by someone, the bdev and inode creation is done with the fake device info and the following partition detection code is just using the wrong data. To avoid this modify the DASD state machine to make sure that the open is rejected until the device analysis is either finished or an unformatted device was detected. Signed-off-by:
Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
The message limit on the iucv connect call for the smsg module is too low. Therefore increase the smsg message limit to 255. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Gerald Schaefer authored
strnlen_user is supposed to return then length count + 1 if no terminating \0 is found, and it should return 0 on exception. Found by David Howells <dhowells@redhat.com>. Signed-off-by:
Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
Dipankar Sarma authored
I have benchmarked this on an x86_64 NUMA system and see no significant performance difference on kernbench. Tested on both x86_64 and powerpc. The way we do file struct accounting is not very suitable for batched freeing. For scalability reasons, file accounting was constructor/destructor based. This meant that nr_files was decremented only when the object was removed from the slab cache. This is susceptible to slab fragmentation. With RCU based file structure, consequent batched freeing and a test program like Serge's, we just speed this up and end up with a very fragmented slab - llm22:~ # cat /proc/sys/fs/file-nr 587730 0 758844 At the same time, I see only a 2000+ objects in filp cache. The following patch I fixes this problem. This patch changes the file counting by removing the filp_count_lock. Instead we use a separate percpu counter, nr_files, for now and all accesses to it are through get_nr_files() api. In the sysctl handler for nr_files, we populate files_stat.nr_files before returning to user. Counting files as an when they are created and destroyed (as opposed to inside slab) allows us to correctly count open files with RCU. Signed-off-by:
Dipankar Sarma <dipankar@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Dipankar Sarma authored
This patch adds new tunables for RCU queue and finished batches. There are two types of controls - number of completed RCU updates invoked in a batch (blimit) and monitoring for high rate of incoming RCUs on a cpu (qhimark, qlowmark). By default, the per-cpu batch limit is set to a small value. If the input RCU rate exceeds the high watermark, we do two things - force quiescent state on all cpus and set the batch limit of the CPU to INTMAX. Setting batch limit to INTMAX forces all finished RCUs to be processed in one shot. If we have more than INTMAX RCUs queued up, then we have bigger problems anyway. Once the incoming queued RCUs fall below the low watermark, the batch limit is set to the default. Signed-off-by:
-
Andrew Morton authored
Implement percpu_counter_sum(). This is a more accurate but slower version of percpu_counter_read_positive(). We need this for Alex's speedup-ext3_statfs patch and for the nr_file accounting fix. Otherwise these things would be too inaccurate on large CPU counts. Cc: Ravikiran G Thirumalai <kiran@scalex86.org> Cc: Alex Tomas <alex@clusterfs.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
GOTO Masanori authored
Fix i386 nmi_watchdog that does not meet watchdog timeout condition. It does not hit die_nmi when it should be triggered, because the current nmi_watchdog_tick in arch/i386/kernel/nmi.c never count up alert_counter like this: void nmi_watchdog_tick (struct pt_regs * regs) { if (last_irq_sums[cpu] == sum) { alert_counter[cpu]++; <- count up alert_counter, but if (alert_counter[cpu] == 5*nmi_hz) die_nmi(regs, "NMI Watchdog detected LOCKUP"); alert_counter[cpu] = 0; <- reset alert_counter This patch changes it back to the previous and working version. This was found and originally written by Kohta NAKASHIMA. (akpm: also uninline write_watchdog_counter(), saving 184 byets) Signed-off-by:GOTO Masanori <gotom@sanori.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Atsushi Nemoto authored
If the 'ptr' is a const, this code cause "assignment of read-only variable" error on gcc 4.x. Use __u64 instead of __typeof__(*(ptr)) for temporary variable to get rid of errors on gcc 4.x. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ingo Molnar authored
Idle threads should have a sane ->timestamp value, to avoid init kernel thread(s) from inheriting it and causing miscalculations in try_to_wake_up(). Reported-by: Mike Galbraith <efault@gmx.de>. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Phillip Susi authored
Fix a bug in udf where it would write uid/gid = 0 to the disk for files owned by the id given with the uid=/gid= mount options. It also adds 4 new mount options: uid/gid=forget and uid/gid=ignore. Without any options the id in core and on disk always match. Giving uid/gid=nnn specifies a default ID to be used in core when the on disk ID is -1. uid/gid=ignore forces the in core ID to allways be used no matter what the on disk ID is. uid/gid=forget forces the on disk ID to always be written out as -1. The use of these options allows you to override ownerships on a disk or disable ownwership information from being written, allowing the media to be used portably between different computers and possibly different users without permissions issues that would require root to correct. Signed-off-by:
Phillip Susi <psusi@cfl.rr.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Andrew Morton authored
Fix the mm/mempolicy.c build for !CONFIG_HUGETLB_PAGE. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Martin Bligh <mbligh@google.com> Signed-off-by:
-
Pavel Machek authored
We're presently getting oopses because Bluetooth (and possibly other) drivers are calling core functions after things have been shut down. So rather than oopsing, let's drop a warning then take avoiding action, so the machine survives. Once all the sub-drivers are fixed up we can remove the take-avoiding-action part. Signed-off-by:
Pavel Machek <pavel@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Mark Fasheh authored
We fixed this: arch/powerpc/platforms/pseries/eeh.c: In function `eeh_add_device_tree_late': arch/powerpc/platforms/pseries/eeh.c:901: warning: implicit declaration of function `eeh_add_device_late' arch/powerpc/platforms/pseries/eeh.c: At top level: arch/powerpc/platforms/pseries/eeh.c:918: error: conflicting types for 'eeh_add_device_late' arch/powerpc/platforms/pseries/eeh.c:901: error: previous implicit declaration of 'eeh_add_device_late' was here make[2]: *** [arch/powerpc/platforms/pseries/eeh.o] Error 1 But we forgot the !CONFIG_EEH stub. Signed-off-by:
Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Linus Torvalds authored
They aren't used (nor even really usable) outside of pipe.c anyway Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] mca recovery return value when no bus check [IA64] SGI SN drivers: don't report !sn2 hardware as an error [IA64] don't report !sn2 or !summit hardware as an error [IA64] gensparse_defconfig: turn on PNPACPI [IA64] Increase severity of MCA recovery messages
-
Linus Torvalds authored
Instead of having a hard-to-read and confusing conditional in the caller, just make the slab order calculation handle this special case, since it's simple and obvious there. Signed-off-by: -
Mauro Carvalho Chehab authored
-
Alexey Dobriyan authored
Typos grab bag of the month. Eyeballed by jmc@ in OpenBSD. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Marco Schluessler authored
Workaround for Nexus CA: Debi test fails unless first debi write is repeated. Signed-off-by:
Marco Schluessler <marco@lordzodiac.de> Signed-off-by:
-
Paul Mackerras authored
A careful reading of the recent changes to the system call entry/exit paths revealed several problems, plus some things that could be simplified and improved: * 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit path, so it was only doing anything with it once it saw some other bit being set. In other words, the noerror behaviour would apply to the next system call where we had to reschedule or deliver a signal, which is not necessarily the current system call. * 32-bit wasn't doing the call to ptrace_notify in the syscall exit path when the _TIF_SINGLESTEP bit was set. * _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set by system calls. I took it out of _TIF_USER_WORK_MASK. * On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers to be restored (unless perhaps a signal was delivered or the syscall was traced or single-stepped). Thus the non-volatile registers weren't restored on exit from a signal handler. We probably got away with it mostly because signal handlers written in C wouldn't alter the non-volatile registers. * On 32-bit I simplified the code and made it more like 64-bit by making the syscall exit path jump to ret_from_except to handle preemption and signal delivery. * 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was set - but I think because of that 32-bit was actually restoring the non-volatile registers on exit from a signal handler. * I changed the order of enabling interrupts and saving the non-volatile registers before calling do_syscall_trace_leave; now we enable interrupts first. Signed-off-by:Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] ip22zilog: Fix oops on runlevel change with serial console [SERIAL] Fix two bugs in parport_serial
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3353/1: NAS100d: protect nas100d_power_exit() with machine_is_nas100d() [ARM] 3352/1: DSB required for the completion of a TLB maintenance operation
-
- 07 Mar, 2006 2 commits
-
-
Russ Anderson authored
When there is no bus check, the return code should be failure, not success. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by:Tony Luck <tony.luck@intel.com>
-
Bjorn Helgaas authored
This stuff is all in the generic ia64 kernel, and the new initcall error reporting complains about them. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
