- 26 Sep, 2006 40 commits
-
-
Eric W. Biederman authored
Now for a completely different but trivial approach. I just boot tested it with 255 CPUS and everything worked. Currently everything (except module data) we place in the per cpu area we know about at compile time. So instead of allocating a fixed size for the per_cpu area allocate the number of bytes we need plus a fixed constant for to be used for modules. It isn't perfect but it is much less of a pain to work with than what we are doing now. AK: fixed warning Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Andi Kleen <ak@suse.de>
-
Rusty Russell authored
The implementation comes from Zach's [RFC, PATCH 10/24] i386 Vmi descriptor changes: Descriptor and trap table cleanups. Add cleanly written accessors for IDT and GDT gates so the subarch may override them. Note that this allows the hypervisor to transparently tweak the DPL of the descriptors as well as the RPL of segments in those descriptors, with no unnecessary kernel code modification. It also allows the hypervisor implementation of the VMI to tweak the gates, allowing for custom exception frames or extra layers of indirection above the guest fault / IRQ handlers. Signed-off-by:
Zachary Amsden <zach@vmware.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Andi Kleen authored
And add proper CFI annotation to it which was previously impossible. This prevents "stuck" messages by the dwarf2 unwinder when reaching the top of a kernel stack. Includes feedback from Jan Beulich Cc: jbeulich@novell.com Signed-off-by: -
Adrian Bunk authored
enable_local_apic can now become static. Cc: len.brown@intel.com Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
acpi_force can become static. Cc: len.brown@intel.com Signed-off-by:
-
Andi Kleen authored
It's needed for external debuggers and overhead is very small. Also make the actual notifier chain they use static Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
It's needed for external debuggers and overhead is very small. Also make the actual notifier chain they use static Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Fix linux/arch/i386/kernel/mpparse.c: In function #MP_bus_info#: linux/arch/i386/kernel/mpparse.c:232: warning: comparison is always false due to limited range of data type Signed-off-by: -
Andi Kleen authored
Since it's all zero. Actually I think gcc 4+ will do that automatically, but earlier compilers won't Signed-off-by: -
Andi Kleen authored
Improve Kconfig description of CONFIG_CRASH_DUMP. Previously it was too brief to be useful. Cc: vgoyal@in.ibm.com Cc: ebiederm@xmission.com Signed-off-by: -
Dimitri Sivanich authored
I've noticed some erratic behavior while testing the X86_64 version of monotonic_clock(). While spinning in a loop reading monotonic clock values (pinned to a single cpu) I noticed that the difference between subsequent values occasionally went negative (time going backwards). I found that in the following code: this_offset = get_cycles_sync(); /* FIXME: 1000 or 1000000? */ --> offset = (this_offset - last_offset)*1000 / cpu_khz; } return base + offset; the offset sometimes turns out to be 0, even though this_offset > last_offset. +Added fix From: Toyo Abe <toyoa@mvista.com> The x86_64-mm-monotonic-clock.patch in 2.6.18-rc4-mm2 made a change to the updating of monotonic_base. It now uses cycles_2_ns(). I suggest that a set_cyc2ns_scale() should be done prior to the setup_irq(). Because cycles_2_ns() can be called from the timer ISR right after the irq0 is enabled. Signed-off-by:Toyo Abe <toyoa@mvista.com> Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
-
Prasanna S.P authored
This patch moves the entry.S:error_entry to .kprobes.text section, since code marked unsafe for kprobes jumps directly to entry.S::error_entry, that must be marked unsafe as well. This patch also moves all the ".previous.text" asm directives to ".previous" for kprobes section. AK: Following a similar i386 patch from Chuck Ebbert AK: Also merged Jeremy's fix in. +From: Jeremy Fitzhardinge <jeremy@goop.org> KPROBE_ENTRY does a .section .kprobes.text, and expects its users to do a .previous at the end of the function. Unfortunately, if any code within the function switches sections, for example .fixup, then the .previous ends up putting all subsequent code into .fixup. Worse, any subsequent .fixup code gets intermingled with the code its supposed to be fixing (which is also in .fixup). It's surprising this didn't cause more havok. The fix is to use .pushsection/.popsection, so this stuff nests properly. A further cleanup would be to get rid of all .section/.previous pairs, since they're inherently fragile. +From: Chuck Ebbert <76306.1226@compuserve.com> Because code marked unsafe for kprobes jumps directly to entry.S::error_code, that must be marked unsafe as well. The easiest way to do that is to move the page fault entry point to just before error_code and let it inherit the same section. Also moved all the ".previous" asm directives for kprobes sections to column 1 and removed ".text" from them. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Dave Jones authored
We have a test that looks for invalid pairings of certain athlon/durons that weren't designed for SMP, and taint accordingly (with 'S') if we find such a configuration. However, this test shouldn't fire if there's only a single CPU present. It's perfectly valid for an SMP kernel to boot on UP hardware for example. AK: changed to num_possible_cpus() Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
Fix a very dubious piece of code in arch/i386/kernel/cpu/common.c:cpu_init(). This clears out %fs and %gs, but clobbers %eax in the process without telling gcc. It turns out that gcc happens to be not using %eax at that point anyway so it doesn't matter much, but it looks like a bomb waiting to go off. This does end up saving an instruction, because gcc wants %eax==0 for the set_debugreg()s below. Signed-off-by:
Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Andi Kleen authored
Now that stacktrace supports dwarf2 don't force frame pointers for lockdep anymore Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Following x86-64 patches. Reuses code from them in fact. Convert the standard backtracer to do all output using callbacks. Use the x86-64 stack tracer implementation that uses these callbacks to implement the stacktrace interface. This allows to use the new dwarf2 unwinder for stacktrace and get better backtraces. Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
Signed-off-by: -
Andi Kleen authored
This unifies the standard backtracer and the new stacktrace in memory backtracer. The standard one is converted to use callbacks and then reimplement stacktrace using new callbacks. The main advantage is that stacktrace can now use the new dwarf2 unwinder and avoid false positives in many cases. I kept it simple to make sure the standard backtracer stays reliable. Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
Needed for use of the unwinder in lockdep, because lockdep runs really early too. Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Lockdep can call the dwarf2 unwinder early, and the dwarf2 code uses safe_smp_processor_id which tries to access the local APIC page. But that doesn't work before the APIC code has set up its fixmap. Check for this case and always return boot cpu then. Cc: jbeulich@novell.com Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
The new dwarf2 unwinder needs to take locks to do backtraces inside modules. This patch makes sure lockdep which calls stacktrace is not reentered. Thanks to Ingo for suggesting this simpler approach. Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
- Remove unused all_contexts parameter No caller used it - Move skip argument into the structure (needed for followon patches) Cc: mingo@elte.hu Signed-off-by: -
Muli Ben-Yehuda authored
Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
Jon Mason <jdmason@us.ibm.com> Signed-off-by:
-
Muli Ben-Yehuda authored
tce_cache_blast_stress was useful during bringup to stress the IOMMU's cache flushing. Now that we quiesce DMAs on every cache flush, using _stress() brings the machine down to its knees once you put it under load. Remove this debug / bringup code that isn't useful anymore completely. Signed-off-by:
-
Muli Ben-Yehuda authored
Introduce new function verify_bit_range(). Define two versions, one for CONFIG_IOMMU_DEBUG enabled and one for disabled. Previously we were checking that the bitmap was consistent every time we allocated or freed an entry in the TCE table, which is good for debugging but incurs an unnecessary penalty on non debug builds. Signed-off-by:
-
Muli Ben-Yehuda authored
Signed-off-by:
-
Chuck Ebbert authored
is_at_popf() needs to test for the iret instruction as well as popf. So add that test and rename it to is_setting_trap_flag(). Also change max insn length from 16 to 15 to match reality. LAHF / SAHF can't affect TF, so the comment in x86_64 is removed. Signed-off-by:
-
Andi Kleen authored
And move one into proto.h Cc: len.brown@intel.com Signed-off-by: -
Fernando Luis Vzquez Cao authored
The combination of "local_save_flags" and "local_irq_disable" seems to be equivalent to "local_irq_save" (see code snips below). Consequently, replace occurrences of local_save_flags+local_irq_disable with local_irq_save. * local_irq_save #define raw_local_irq_save(flags) \ do { (flags) = __raw_local_irq_save(); } while (0) static inline unsigned long __raw_local_irq_save(void) { unsigned long flags = __raw_local_save_flags(); raw_local_irq_disable(); return flags; } * local_save_flags #define raw_local_save_flags(flags) \ do { (flags) = __raw_local_save_flags(); } while (0) Signed-off-by:Fernando Vazquez <fernando@intellilink.co.jp> Signed-off-by:
-
Andi Kleen authored
Signed-off-by: -
Andi Kleen authored
Mostly by adding casts. I didn't touch the "invalid access past ..." which are caused by the sigset conversion. Signed-off-by: -
Andi Kleen authored
Fixes linux/arch/x86_64/mm/fault.c:125:7: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/mm/fault.c:125:7: expected void [noderef] *<noident><asn:1> linux/arch/x86_64/mm/fault.c:125:7: got unsigned char *[assigned] instr linux/arch/x86_64/mm/fault.c:163:8: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/mm/fault.c:163:8: expected void [noderef] *<noident><asn:1> linux/arch/x86_64/mm/fault.c:163:8: got unsigned char *[assigned] instr linux/arch/x86_64/mm/fault.c:179:9: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/mm/fault.c:179:9: expected void [noderef] *<noident><asn:1> linux/arch/x86_64/mm/fault.c:179:9: got unsigned long *<noident> Signed-off-by: -
Andi Kleen authored
Fixes linux/arch/x86_64/kernel/vsyscall.c:276:7: warning: constant 0x0f40000000000 is so big it is long linux/arch/x86_64/kernel/vsyscall.c:80:14: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:80:14: expected void const volatile [noderef] *addr<asn:2> linux/arch/x86_64/kernel/vsyscall.c:80:14: got void *<noident> linux/arch/x86_64/kernel/vsyscall.c:200:7: warning: incorrect type in assignment (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:200:7: expected unsigned short [usertype] *map1 linux/arch/x86_64/kernel/vsyscall.c:200:7: got void [noderef] *<asn:2> linux/arch/x86_64/kernel/vsyscall.c:203:7: warning: incorrect type in assignment (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:203:7: expected unsigned short [usertype] *map2 linux/arch/x86_64/kernel/vsyscall.c:203:7: got void [noderef] *<asn:2> linux/arch/x86_64/kernel/vsyscall.c:215:10: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:215:10: expected void volatile [noderef] *addr<asn:2> linux/arch/x86_64/kernel/vsyscall.c:215:10: got unsigned short [usertype] *map2 linux/arch/x86_64/kernel/vsyscall.c:217:10: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:217:10: expected void volatile [noderef] *addr<asn:2> linux/arch/x86_64/kernel/vsyscall.c:217:10: got unsigned short [usertype] *map1 Signed-off-by: -
Andi Kleen authored
Minor cleanup. Keep setup.c free from unrelated clutter. Signed-off-by: -
Andi Kleen authored
Move it into srat.c No need to clutter up setup.c for it And remove use in setup.c completely - it only guarded a printk which can be done unconditionally. Signed-off-by: -
Andi Kleen authored
Removes code duplication between i386/x86-64. Not needed anymore in setup.c since early_param cleanup Cc: len.brown@intel.com Signed-off-by: -
Andi Kleen authored
I think it was only needed for the printks and we can do them later. I put in a single early_printk so that we know the kernel is alive (early_printk doesn't need any locks) This makes some things easier for initialization of unwind for lockdep, which is needed by later patches. cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
Instead of hackish manual parsing Requires earlier i386 patchkit, but also fixes i386 early_printk again. I removed some obsolete really early parameters which didn't do anything useful. Also made a few parameters that needed it early (mostly oops printing setup) Also removed one panic check that wasn't visible without early console anyways (the early console is now initialized after that panic) This cleans up a lot of code. Signed-off-by:
-
