- 26 Sep, 2006 40 commits
-
-
Andi Kleen authored
Lockdep can call the dwarf2 unwinder early, and the dwarf2 code uses safe_smp_processor_id which tries to access the local APIC page. But that doesn't work before the APIC code has set up its fixmap. Check for this case and always return boot cpu then. Cc: jbeulich@novell.com Cc: mingo@elte.hu Signed-off-by:Andi Kleen <ak@suse.de>
-
Andi Kleen authored
The new dwarf2 unwinder needs to take locks to do backtraces inside modules. This patch makes sure lockdep which calls stacktrace is not reentered. Thanks to Ingo for suggesting this simpler approach. Cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
- Remove unused all_contexts parameter No caller used it - Move skip argument into the structure (needed for followon patches) Cc: mingo@elte.hu Signed-off-by: -
Muli Ben-Yehuda authored
Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
Jon Mason <jdmason@us.ibm.com> Signed-off-by:
-
Muli Ben-Yehuda authored
tce_cache_blast_stress was useful during bringup to stress the IOMMU's cache flushing. Now that we quiesce DMAs on every cache flush, using _stress() brings the machine down to its knees once you put it under load. Remove this debug / bringup code that isn't useful anymore completely. Signed-off-by:
-
Muli Ben-Yehuda authored
Introduce new function verify_bit_range(). Define two versions, one for CONFIG_IOMMU_DEBUG enabled and one for disabled. Previously we were checking that the bitmap was consistent every time we allocated or freed an entry in the TCE table, which is good for debugging but incurs an unnecessary penalty on non debug builds. Signed-off-by:
-
Muli Ben-Yehuda authored
Signed-off-by:
-
Chuck Ebbert authored
is_at_popf() needs to test for the iret instruction as well as popf. So add that test and rename it to is_setting_trap_flag(). Also change max insn length from 16 to 15 to match reality. LAHF / SAHF can't affect TF, so the comment in x86_64 is removed. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Andi Kleen authored
And move one into proto.h Cc: len.brown@intel.com Signed-off-by: -
Fernando Luis Vzquez Cao authored
The combination of "local_save_flags" and "local_irq_disable" seems to be equivalent to "local_irq_save" (see code snips below). Consequently, replace occurrences of local_save_flags+local_irq_disable with local_irq_save. * local_irq_save #define raw_local_irq_save(flags) \ do { (flags) = __raw_local_irq_save(); } while (0) static inline unsigned long __raw_local_irq_save(void) { unsigned long flags = __raw_local_save_flags(); raw_local_irq_disable(); return flags; } * local_save_flags #define raw_local_save_flags(flags) \ do { (flags) = __raw_local_save_flags(); } while (0) Signed-off-by:Fernando Vazquez <fernando@intellilink.co.jp> Signed-off-by:
-
Andi Kleen authored
Signed-off-by: -
Andi Kleen authored
Mostly by adding casts. I didn't touch the "invalid access past ..." which are caused by the sigset conversion. Signed-off-by: -
Andi Kleen authored
Fixes linux/arch/x86_64/mm/fault.c:125:7: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/mm/fault.c:125:7: expected void [noderef] *<noident><asn:1> linux/arch/x86_64/mm/fault.c:125:7: got unsigned char *[assigned] instr linux/arch/x86_64/mm/fault.c:163:8: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/mm/fault.c:163:8: expected void [noderef] *<noident><asn:1> linux/arch/x86_64/mm/fault.c:163:8: got unsigned char *[assigned] instr linux/arch/x86_64/mm/fault.c:179:9: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/mm/fault.c:179:9: expected void [noderef] *<noident><asn:1> linux/arch/x86_64/mm/fault.c:179:9: got unsigned long *<noident> Signed-off-by: -
Andi Kleen authored
Fixes linux/arch/x86_64/kernel/vsyscall.c:276:7: warning: constant 0x0f40000000000 is so big it is long linux/arch/x86_64/kernel/vsyscall.c:80:14: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:80:14: expected void const volatile [noderef] *addr<asn:2> linux/arch/x86_64/kernel/vsyscall.c:80:14: got void *<noident> linux/arch/x86_64/kernel/vsyscall.c:200:7: warning: incorrect type in assignment (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:200:7: expected unsigned short [usertype] *map1 linux/arch/x86_64/kernel/vsyscall.c:200:7: got void [noderef] *<asn:2> linux/arch/x86_64/kernel/vsyscall.c:203:7: warning: incorrect type in assignment (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:203:7: expected unsigned short [usertype] *map2 linux/arch/x86_64/kernel/vsyscall.c:203:7: got void [noderef] *<asn:2> linux/arch/x86_64/kernel/vsyscall.c:215:10: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:215:10: expected void volatile [noderef] *addr<asn:2> linux/arch/x86_64/kernel/vsyscall.c:215:10: got unsigned short [usertype] *map2 linux/arch/x86_64/kernel/vsyscall.c:217:10: warning: incorrect type in argument 1 (different address spaces) linux/arch/x86_64/kernel/vsyscall.c:217:10: expected void volatile [noderef] *addr<asn:2> linux/arch/x86_64/kernel/vsyscall.c:217:10: got unsigned short [usertype] *map1 Signed-off-by: -
Andi Kleen authored
Minor cleanup. Keep setup.c free from unrelated clutter. Signed-off-by: -
Andi Kleen authored
Move it into srat.c No need to clutter up setup.c for it And remove use in setup.c completely - it only guarded a printk which can be done unconditionally. Signed-off-by: -
Andi Kleen authored
Removes code duplication between i386/x86-64. Not needed anymore in setup.c since early_param cleanup Cc: len.brown@intel.com Signed-off-by: -
Andi Kleen authored
I think it was only needed for the printks and we can do them later. I put in a single early_printk so that we know the kernel is alive (early_printk doesn't need any locks) This makes some things easier for initialization of unwind for lockdep, which is needed by later patches. cc: mingo@elte.hu Signed-off-by: -
Andi Kleen authored
Instead of hackish manual parsing Requires earlier i386 patchkit, but also fixes i386 early_printk again. I removed some obsolete really early parameters which didn't do anything useful. Also made a few parameters that needed it early (mostly oops printing setup) Also removed one panic check that wasn't visible without early console anyways (the early console is now initialized after that panic) This cleans up a lot of code. Signed-off-by: -
Rusty Russell authored
This patch replaces the open-coded early commandline parsing throughout the i386 boot code with the generic mechanism (already used by ppc, powerpc, ia64 and s390). The code was inconsistent with whether it deletes the option from the cmdline or not, meaning some of these will get passed through the environment into init. This transformation is mainly mechanical, but there are some notable parts: 1) Grammar: s/linux never set's it up/linux never sets it up/ 2) Remove hacked-in earlyprintk= option scanning. When someone actually implements CONFIG_EARLY_PRINTK, then they can use early_param(). [AK: actually it is implemented, but I'm adding the early_param it in the next x86-64 patch] 3) Move declaration of generic_apic_probe() from setup.c into asm/apic.h 4) Various parameters now moved into their appropriate files (thanks Andi). 5) All parse functions which examine arg need to check for NULL, except one where it has subtle humor value. AK: readded acpi_sci handling which was completely dropped AK: moved some more variables into acpi/boot.c Cc: len.brown@intel.com Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Rusty Russell authored
We currently assume that boot parameters which are handled by early_param() will not overlap boot parameters handled by __setup: if they do, behaviour is dependent on link order, usually meaning __setup will not get called. ACPI wants to use early_param("pci"), and pci uses __setup("pci="), so we modify the core to let them coexist: "pci=noacpi" will now get passed to both. Signed-off-by: -
Andi Kleen authored
This makes it possible to modify CPU flags in command line options without hacks. And remove another copy in head64.c Signed-off-by: -
Chuck Ebbert authored
The lock prefix will cause an exception when used with the popf instruction, so no need to continue searching after it's found. Signed-off-by:
-
Muli Ben-Yehuda authored
There's no need to check for invalid DMA data direction in nommu and gart since we do it in dma-mapping.h anyway before calling the individual dma-ops. Signed-off-by:
-
Eric W. Biederman authored
Allows easier extension of the GDT by using the proper C symbol for the size in the descriptor. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Jan Beulich authored
Add unwind annotations to arch/x86_64/lib/*.S, and also use the macros provided by linux/linkage.h where-ever possible. Some of the alternative instructions handling needed to be adjusted so that the replacement code would also have valid unwind information. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Andi Kleen authored
- Inline spinlock strings into their inline functions - Convert macros to typesafe inlines - Replace some leftover __asm__ __volatile__s with asm volatile Signed-off-by: -
Andi Kleen authored
- Inline spinlock strings into their inline functions - Convert macros to typesafe inlines - Replace some leftover __asm__ __volatile__s with asm volatile Signed-off-by: -
Chuck Ebbert authored
When testing for the REX instruction prefix, first check for 32-bit mode because in compat mode the REX prefix is an increment instruction. Signed-off-by:
-
Andi Kleen authored
Lock sections cannot be handled by the dwarf2 unwinder. Disadvantage is a taken branch in the hot path. Signed-off-by: -
Andi Kleen authored
Lock sections don't work the new dwarf2 unwinder This generates slightly smaller code. It adds one more taken jump to the fast path. Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Lock sections don't work the new dwarf2 unwinder This generates slightly smaller code. It adds one more taken jump to the fast path. Also move the trampolines into semaphore.S and add proper CFI annotations. Cc: jbeulich@novell.com Signed-off-by: -
Andi Kleen authored
Lock sections don't work the new dwarf2 unwinder This generates slightly smaller code. It adds one more taken jump to the fast path. Cc: jbeulich@novell.com Signed-off-by: -
Muli Ben-Yehuda authored
Make translation_disabled a uchar rather than an int Signed-off-by:
-
Muli Ben-Yehuda authored
Signed-off-by:
-
Muli Ben-Yehuda authored
The pci_get_device() API decrements the reference count on the 'from' parameter when it continues searching. Therefore, take a ref count on Calgary bus when we initialize them in either translated or non-translated mode. Signed-off-by:
-
Muli Ben-Yehuda authored
We were freeing the iommu_table and leaking the bitmap pages. Also rename it to calgary_free_bus, which is more accurate. Signed-off-by:
-
Muli Ben-Yehuda authored
Signed-off-by:
-
Muli Ben-Yehuda authored
Move the tce_table_kva array, disabled bitmap and bus_to_phb array into a new per bus 'struct calgary_bus_info'. Also slightly reorganize build_tce_table and tce_table_setparms to avoid exporting bus_info to tce.c. Signed-off-by:
-
Muli Ben-Yehuda authored
Rearrange struct members loosely based on size for improved alignment and to save a few bytes. Signed-off-by:
-
