This make sure that an iseries_defconfig does not inlude
other platforms.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Hrm, there's no way this ever built at time of merge. There's a missing } and
the wrong type on phy_irq.

Also, another const for get_property().

  CC      arch/powerpc/sysdev/fsl_soc.o
arch/powerpc/sysdev/fsl_soc.c: In function 'fs_enet_of_init':
arch/powerpc/sysdev/fsl_soc.c:625: error: assignment of read-only variable 'phy_irq'
arch/powerpc/sysdev/fsl_soc.c:625: warning: assignment makes integer from pointer without a cast
arch/powerpc/sysdev/fsl_soc.c:661: warning: assignment discards qualifiers from pointer target type
arch/powerpc/sysdev/fsl_soc.c:684: error: subscripted value is neither array nor pointer
arch/powerpc/sysdev/fsl_soc.c:687: error: subscripted value is neither array nor pointer
arch/powerpc/sysdev/fsl_soc.c:722: warning: ISO C90 forbids mixed declarations and code
arch/powerpc/sysdev/fsl_soc.c:728: error: invalid storage class for function 'cpm_uart_of_init'
arch/powerpc/sysdev/fsl_soc.c:798: error: initializer element is not constant
arch/powerpc/sysdev/fsl_soc.c:798: error: expected declaration or statement at end of input
make[1]: *** [arch/powerpc/sysdev/fsl_soc.o] Error 1
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Avoid the use of an uninitialized stack variable when the powerpc device tree
bootargs property is either missing or incorrectly defined.  This also makes
CONFIG_CMDLINE work properly under these conditions.  This change adds a test
for the existence of the bootargs property.

early_init_dt_scan_chosen() tests for a zero length bootargs property in its
CONFIG_CMDLINE processing, but the current implementation of
of_get_flat_dt_prop() doesn't assign a value to the length when no property is
found.  Since an automatic variable is used, a stale value from the stack will
be used in the test.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

David Woodhouse points out that the comment accompanying the MTFSF_L
macro is misleading. We should make it clear that the L bit is ignored
on older CPUS, not the entire instruction.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Since the ipr driver now supports SATA and depends on libata,
enable libata to get built.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch adds checking of the PCI_INTERRUPT_PIN register before
using standard OF parsing to retreive PCI interrupts. The reason is
that some PCI devices may have no PCI interrupt, though they may have
interrupts attached via other means. In this case, we shall not use
irq->pdev, but device-specific code can later retreive those interrupts
instead.

Without that patch, Maple and derivatives don't get the right interrupt
for the second IDE channel as the linux IDE code fallsback to the PCI
irq instead of trying to use the legacy ones for the on-board controller
(which has no PCI_INTERRUPT_PIN). Having no PCI IRQ assign to it (as it
doesn't request any) fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The zImage wrapper has a "hack" that force the decompression to happen
above 20Mb for 64 bits kernels, to work around issues with some
firmwares on the field. However, the new wrapper has a bug which makes
that hack not work properly. This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The "linux,tce-size" property is only 32 bits (see
prom_initialize_tce_table() in arch/powerpc/kernel/prom_init.c).
Treating it as an unsigned long in iommu_table_setparms() leads to
access beyond the end of the property's buffer, so we pass garbage to
the memset() in that function.

[boot]0020 XICS Init
i8259 legacy interrupt controller initialized
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 32768 bytes)
cpu 0x0: Vector: 300 (Data Access) at [c0000000fe783850]
    pc: c000000000035e90: .memset+0x60/0xfc
    lr: c000000000044fa4: .iommu_table_setparms+0xb0/0x158
    sp: c0000000fe783ad0
   msr: 9000000000009032
   dar: c000000100000000
 dsisr: 42010000
  current = 0xc00000000450e810
  paca    = 0xc000000000411580
    pid   = 1, comm = swapper
enter ? for help
[link register   ] c000000000044fa4 .iommu_table_setparms+0xb0/0x158
[c0000000fe783ad0] c000000000044f4c .iommu_table_setparms+0x58/0x158
(unreliable)
[c0000000fe783b70] c00000000004529c
.iommu_bus_setup_pSeries+0x1c4/0x254
[c0000000fe783c00] c00000000002b8ac .do_bus_setup+0x3c/0xe4
[c0000000fe783c80] c00000000002c924 .pcibios_fixup_bus+0x64/0xd8
[c0000000fe783d00] c0000000001a2d5c .pci_scan_child_bus+0x6c/0x10c
[c0000000fe783da0] c00000000002be28 .scan_phb+0x17c/0x1b4
[c0000000fe783e40] c0000000003cfa00 .pcibios_init+0x58/0x19c
[c0000000fe783ec0] c0000000000094b4 .init+0x1e8/0x3d8
[c0000000fe783f90] c000000000026e54 .kernel_thread+0x4c/0x68
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add the DTS for the Freescale MPC 8349E-mITX reference board.  Contact
Vitesse for the driver for the VSC 7385.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix a typo. Noticed by the unlikely profiler.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix up some of the buildbreaks from the irq handler changes.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* git://git.infradead.org/~dhowells/irq-2.6:
  IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
  IRQ: Typedef the IRQ handler function type
  IRQ: Typedef the IRQ flow handler function type

The UDF filesystem can't be mounted in read-write mode any more,
because of forgotten braces.
Signed-off-by: Peter Osterlund <petero2@telia.com>
[ Duh! ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Include linux/kallsyms.h unconditionally for print_symbol().
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] i386: fix rwsem build bug on CONFIG_M386=y
  [PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlers
  [PATCH] x86-64: Fix FPU corruption
  [PATCH] x86: Terminate the kernel stacks for the unwinder
  [PATCH] i386: Fix PCI BIOS config space access
  [PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hex
  [PATCH] x86-64: Calgary IOMMU: Update Jon's contact info
  [PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register space location
  [PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_init
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

[ Manually skipped commits that incorrectly ignored AC in kernel space.
  The alignment fault is defined to only happen for CPL3 anyway  - Linus ]

commit 0181944f adds a
'extended_error_logging' global variable to qla2xxx which is defined by
qla4xxx too.

Trying to build both drivers results in the following error:

  LD      drivers/scsi/built-in.o
  drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure':
  drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging'
  drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
  first defined here
  make[2]: *** [drivers/scsi/built-in.o] Error 1
  make[1]: *** [drivers/scsi] Error 2
  make: *** [drivers] Error 2

The following patch simply adds a qla2_ (qla4_ respectively) prefix to
the variable name.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

CONFIG_M386 turns on spinlock-based generic rwsems - which surprises the
semaphore.S rwsem stubs. Tested both with and without CONFIG_M386.
Reported-by: Klaus Knopper <knopper@knopper.net>
Triaged-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>

Add correct CFI annotation to the backlink on top of the interrupt stack.
Signed-off-by: Andi Kleen <ak@suse.de>

This reverts an earlier patch that was found to cause FPU
state corruption. I think the corruption happens because
unlazy_fpu() can cause FPU exceptions and when it happens
after the current switch some processing would affect
the state in the wrong process.

Thanks to  Douglas Crosher and Tom Hughes for testing.

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>

Always make sure RIP/EIP is 0 in the registers stored on the top
of the stack of a kernel thread. This makes sure the unwinder code
won't try a fallback but knows the stack has ended.

AK: this patch is a bit mysterious. in theory they should be terminated
anyways, but it seems to fix at least one crash. Anyways double termination
probably doesn't hurt.
Signed-off-by: Andi Kleen <ak@suse.de>

Got broken by a earlier change.

Also add a printk when no pci config method could be found.

Cc: gregkh@suse.de
Signed-off-by: Andi Kleen <ak@suse.de>

Make the references to the bus number in hex instead of decimal, as
that is the way that lspci prints out the bus numbers.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>

Also add copyright for work done after leaving IBM.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>

The purpose of the code being modified is to determine the location
of the calgary chip address space.  This is done by a magical formula
of FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase) to
find the offset where BIOS puts it.  In this formula,
OneBasedChassisNumber corresponds to the NUMA node, and rionodeid is
always 2 or 3 depending on which chip in the system it is.  The
problem was that we had an off by one error that caused us to account
some busses to the wrong chip and thus give them the wrong address
space.

Fixes RH bugzilla #203971.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-bu: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>

calgary_init's for loop does not correspond to the actual device being
checked, which makes its upperbound check for array overflow useless.
Changing this to a do-while loop is the correct way of doing this.
There should be no possibility of spinning forever in this loop, as
pci_get_device states that it will go through all iterations, then
return NULL (thus breaking the loop).
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Andi Kleen <ak@suse.de>

Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

Typedef the IRQ handler function type.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1356d1e5fd256997e3d3dce0777ab787d0515c7a commit)

Typedef the IRQ flow handler function type.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 8e973fbdf5716b93a0a8c0365be33a31ca0fa351 commit)

Merge window closed..

There is a bug in the current version of the itmtouch USB touchscreen
driver.  The if statment that checks if pressure is being applied to the
touch screen is now missing a ! (not), so events are no longer being
reported correctly.

The original source code for this line was as follows:

	#define UCP(x) ((unsigned char*)(x))
	#define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z))

	...
	if (!UCOM(urb, 7, 0x20)) {

And was cleaned to:

	unsigned char *data = urb->transfer_buffer;
	....
	 if (data[7] & 0x20) {

(note the lack of '!')

This has been tested on an LG L1510BF and an LG1510SF touch screen.
Signed-off-by: Mark Assad <massad@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6:
  [PA-RISC] Fix time.c for new do_timer() calling convention
  [PA-RISC] Fix must_check warnings in drivers.c
  [PA-RISC] Fix parisc_newuname()
  [PA-RISC] Remove warning from pci.c
  [PA-RISC] Fix filldir warnings
  [PA-RISC] Fix sys32_sysctl
  [PA-RISC] Fix sba_iommu compilation

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] cell: fix bugs found by sparse
  [POWERPC] spiderpic: enable new style devtree support
  [POWERPC] Update cell_defconfig
  [POWERPC] spufs: add infrastructure for finding elf objects
  [POWERPC] spufs: support new OF device tree format
  [POWERPC] spufs: add support for read/write on cntl
  [POWERPC] spufs: remove support for ancient firmware
  [POWERPC] spufs: make mailbox functions handle multiple elements
  [POWERPC] spufs: use correct pg_prot for mapping SPU local store
  [POWERPC] spufs: Add infrastructure needed for gang scheduling
  [POWERPC] spufs: implement error event delivery to user space
  [POWERPC] spufs: fix context switch during page fault
  [POWERPC] spufs: scheduler support for NUMA.
  [POWERPC] spufs: cell spu problem state mapping updates

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
  [SCSI] Initial Commit of qla4xxx
  [SCSI] raid class: handle component-add errors
  [SCSI] SCSI megaraid_sas: handle thrown errors
  [SCSI] SCSI aic94xx: handle sysfs errors
  [SCSI] SCSI st: fix error handling in module init, sysfs
  [SCSI] SCSI sd: fix module init/exit error handling
  [SCSI] SCSI osst: add error handling to module init, sysfs
  [SCSI] scsi: remove hosts.h
  [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
  [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
  [SCSI] megaraid_sas: adds tasklet for cmd completion
  [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
  [SCSI] megaraid_sas: function pointer for disable interrupt
  [SCSI] megaraid_sas: frame count optimization
  [SCSI] megaraid_sas: FW transition and q size changes
  [SCSI] qla2xxx: Update version number to 8.01.07-k2.
  [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
  [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
  [SCSI] qla2xxx: Add support for host port state FC transport attribute.
  [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
  ...

do_timer now wants to know how many ticks have elapsed.  Now that we
have to calculate that, we can eliminate some of the clever code that
avoided having to calculate that.  Also add some more documentation.
I'd like to thank Grant Grundler for helping me with this.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Panic if we can't register the parisc bus or the root parisc device.
There's no way we can boot without them, so let the user know ASAP.

If we can't register a parisc device, handle the failure gracefully.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

The utsname virtualisation broke parisc_newuname compilation.
Rewrite the implementation to call sys_newuname() like sparc64 does.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

max() doesn't like comparing an unsigned long and a resource_size_t,
so make the local variables resource_size_t too.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>