- 09 Jan, 2006 40 commits
-
-
Michael Ellerman authored
This patch separates usage of KERNELBASE and PAGE_OFFSET. I haven't looked at any of the PPC32 code, if we ever want to support Kdump on PPC we'll have to do another audit, ditto for iSeries. This patch makes PAGE_OFFSET the constant, it'll always be 0xC * 1 gazillion for 64-bit. To get a physical address from a virtual one you subtract PAGE_OFFSET, _not_ KERNELBASE. KERNELBASE is the virtual address of the start of the kernel, it's often the same as PAGE_OFFSET, but _might not be_. If you want to know something's offset from the start of the kernel you should subtract KERNELBASE. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
There's a bunch of code that compares an address with KERNELBASE to see if it's a "kernel address", ie. >= KERNELBASE. The proper test is actually to compare with PAGE_OFFSET, since we're going to change KERNELBASE soon. So replace all of them with an is_kernel_addr() macro that does that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Currently machine_crash_shutdown() gets a struct pt_regs, but doesn't pass it through to the ppc_md function, it should. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Andy Whitcroft authored
When we select ppc32 under the powerpc architecture we get the error below. This relates to defining distribute_irqs when this configuratiom option is undefined. CC arch/powerpc/sysdev/mpic.o .../arch/powerpc/sysdev/mpic.c: In function `mpic_setup_this_cpu': .../arch/powerpc/sysdev/mpic.c:788: error: `CONFIG_IRQ_ALL_CPUS' undeclared (first use in this function) Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Andy Whitcroft authored
Clean up the currently available memory models for ppc32 under the powerpc architecture. We need FLATMEM for ppc32: enable it. SPARSEMEM is not parameterised for ppc32 so disable that. Take this opportunity to clean up white space for FLATMEM_ENABLE. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Otavio Salvador authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Mike Kravetz authored
Here is an updated version of the patch that panics if no memory is found as Nathan suggested. I'm still concerned that panic strings (not just the one added here) at this stage of booting do not show up on my system. But, that is an issue separate from this patch. Combine get_mem_*_cells() routines to avoid multiple memory node lookups. Added missing of_node_put() call. Changed variable names to help with some confusion as to meaning. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This reverts f1fdc0117004d343698b9830e141491d5ae320d1 commit.
-
Benjamin Herrenschmidt authored
This updates the OF address parsers to return the IO flags indicating the type of address obtained. It also adds a PCI call for converting physical addresses that hit IO space into into IO tokens, and add routines that return the translated addresses into struct resource Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
The udbg low level io layer has an issue with udbg_getc() returning a char (unsigned on ppc) instead of an int, thus the -1 if you had no available input device could end up turned into 0xff, filling your display with bogus characters. This fixes it, along with adding a little blob to xmon to do a delay before exiting when getting an EOF and fixing the detection of ADB keyboards in udbg_adb.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Andy Whitcroft authored
When compiling without BOOTX_TEXT the following warning is emitted. Fix up the definition to only be made when required. CC arch/powerpc/platforms/powermac/udbg_adb.o .../arch/powerpc/platforms/powermac/udbg_adb.c:41: warning: `udbg_adb_use_btext' defined but not used Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Andy Whitcroft authored
udbg_adb_init() has become dependent on btext_drawchar, even when BOOTX_TEXT support is not selected. This leads to the error below. Make the check dependant on BOOTX_TEXT. LD .tmp_vmlinux1 arch/powerpc/platforms/built-in.o(.toc1+0xa40): undefined reference to `btext_drawchar' Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
23-rpaphp-migrate.patch (parts) This patch moves some pci device add & remove code from the PCI hotplug directory to the arch/powerpc/kernel directory, and cleans it up a tad. The primary reason for this is that the code performs some fairly generic operations that are shared with the PCI error recovery code (living in the arch/powerpc/kernel directory). Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
22-rpaphp-eliminate-dupe-code.patch (parts) The RPAPHP code contains two routines that appear to be gratuitous copies of very similar pci code. In particular, rpaphp_claim_resource ~~ pci_claim_resource rpadlpar_claim_one_bus == pcibios_claim_one_bus This makes pcibios_claim_one_bus from arch/powerpc/kernel/pci_64.c available to the RPAPHP code. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
20-rpaphp-eeh-cleanup.patch This patch move some code from the rpaphp directory, to the powerpc directory, where it should have been all along (Among other things, I need it in the powerpc directory for the PCI error recovery.) Please note that patch affects TWO maintainers: Paul, after applying the powerpc part, please ask that GregKH appli the PCI part. It is safe to have the powerpc part go in first. It would be bad to have the PCI part go in first. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Mike Kravetz authored
I started to add missing of_node_put() calls to the routines that determine the number of cells for memory. Decided to combine the routines instead of making separate node lookups. Changed variable names to help with some confusion as to meaning. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This fixes the new serial probe code with some PCI MMIO UARTs, and fixes CHRP build with ARCH=powerpc. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Woodhouse authored
This makes ARCH=ppc build in your powerpc tree again, with the new syscall entry/exit path. Still doesn't actually boot on my Pegasos; the last thing I see is 'MMU:exit'. But at least it builds -- I'll look at why it doesn't boot later, so that I can see if the mv643xx_eth actually works with ARCH=ppc (it doesn't with ARCH=powerpc; two in every three packets I receive are offset by 4 bytes). Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Marcelo Tosatti authored
This updates m8xx_wdt as follows: 1) Remove now obsolete fpos check in the write() function. The driver is currently non functional due to this bug. 2) Use in/out macros for register access. 3) Allows m8xx_wdt to use a kernel timer instead of the builtin RTC/PIT for keep-alive trigger (which is responsible for servicing the watchdog until an userspace application takes over). For instance Cyclades PRxK boards (MPC 855T based) have a non-functional internal RTC/PIT unit. Behaviour for boards with RTC/PIT is unchaged. 4) The last change required moving the RTCSC register setting code to a weak function which can be overriden by board specific files. Otherwise the timer init code trashes the register making it impossible for m8xx_wdt to detect the situation. Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Woodhouse authored
On Thu, 2005-11-24 at 12:51 +0000, David Woodhouse wrote: > Somehow this one slipped through the cracks; when we ended up in > do_signal() on a 32-bit kernel but without having the caller-saved > registers into the regs, we didn't set the TIF_SAVE_NVGPRS flag to > ensure they got saved later. Oh, and if we actually set the flag, then we fairly quickly find out that I was a bit overzealous in copying code from entry_64.S ... :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Woodhouse authored
Somehow this one slipped through the cracks; when we ended up in do_signal() on a 32-bit kernel but without having the caller-saved registers into the regs, we didn't set the TIF_SAVE_NVGPRS flag to ensure they got saved later. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Woodhouse authored
On Tue, 2005-11-22 at 15:49 +1100, Benjamin Herrenschmidt wrote: > This moves the discovery of legacy serial ports to a separate file, > makes it common to ppc32 and ppc64, and reworks it to use the new OF > address translators to get to the ports early. This new version can also > detect some PCI serial cards using legacy chips and will probably match > those discovered port with the default console choice. This makes it deal with the fact that the Pegasos firmware reports that its clock frequency is zero... Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
My previous patches inadvertently broke building a G5 kernel with CONFIG_XMON enabled. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
This patch removes several unnecessary fields from the paca: - next_jiffy_update_tb was simply unused. Remove trivially. - The exdsi exception save area was not used. There were plans to use it, but they never seem to have gone anywhere. If they ever do, we can put it back. Remove from the paca, and from asm-offsets.c - The default_decr field was used from asm, but was only ever assigned the value of tb_ticks_per_jiffy. Just access tb_ticks_per_jiffy from asm directly instead. Built and booted on POWER5 LPAR and iSeries RS64. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
On iSeries, the paca contains, amongst other things an ItLpRegSave structure used by the hypervisor to save registers. The hypervisor locates this area through a pointer at the beginning of the paca, so the structure itself can be located elsewhere. This patch moves the reg_save area out into its own array. This reduces the amount of iSeries specific gunk which is visible to general powerpc code via paca.h Built and booted on POWER5 LPAR and iSeries RS64. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
Currently, the powerpc version of hugetlb_get_unmapped_area() entirely ignores the hint address. The only way to get a hugepage mapping at a specified address is with MAP_FIXED, in which case there's no way (short of parsing /proc/self/maps) for userspace to tell if it will clobber an existing mapping. This is inconvenient, so the patch below makes hugepage mappings use the given hint address if possible. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
Sam Ravnborg pointed out that calling if_changed was redundant in the rule since a prerequisite had to have changed for us to get there. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
powerpc: Add support for building uImages Add support to build a kernel image bootable by u-boot. Most of the makefile foo is taken from arch/ppc/boot/images/Makefile Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
Make get_IRQ return a pending irq number so it can be handled in the powerpc geeneric code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Rothwell authored
Hide some of the iseries details in iSeries_get_irq. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Rothwell authored
Encode the sub bus number into the real irq number (even though it is always zero for now) so that we have enough information to do the EOI in iseries_end_IRQ. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Stephen Rothwell authored
Remove two useless counters. DeStropify. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Benjamin Herrenschmidt authored
Converts the macio_asic core to use the new OF parsing routines instead of relying on the pre-parsed values in struct device_node. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
ARCH=powerpc couldn't boot from BootX as it uses a "different" way of getting in the kernel. This patch adds the necessary trampolines, creating a flattened device-tree from the tree passed from MacOS, and initializing the btext engine early for really-early debugging. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This moves the discovery of legacy serial ports to a separate file, makes it common to ppc32 and ppc64, and reworks it to use the new OF address translators to get to the ports early. This new version can also detect some PCI serial cards using legacy chips and will probably match those discovered port with the default console choice. Only ppc64 gets udbg still yet, unifying udbg isn't finished yet. It also adds some speed-probing code to udbg so that the default console can come up at the same speed it was set to by the firmware. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
Parsing addresses extracted from Open Firmware isn't a simple matter. We have various bits of code that try to do it in various place, including some heuristics in prom.c that pre-parse addresses at boot and fill device-nodes "addrs", but those are dodgy at best and I want to deprecate them. So this patch introduces a new set of routines that should be capable of parsing most types of addresses and translating them into CPU physical addresses. It currently works for things on PCI busses and ISA busses and should work on "standard" busses like the root bus or the MacIO bus that don't put funky flags in addresses. If you have other bus types that do use funky flags, you'll have to add new bus type translators, which is fairly easy. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Woodhouse authored
On Tue, 2005-11-15 at 18:52 +0000, David Woodhouse wrote: > This cleanup patch speeds up the null syscall path on ppc64 by about 3%, > and brings the ppc32 and ppc64 code slightly closer together. Needs this unless your binutils, like mine, are clever enough to notice my stupidity and fix it up automatically... Spotted by Paul. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
include/asm-ppc/bseip.h is a duplicate of arch/ppc/platforms/bseip.h and is not referenced anywhere, so get rid of it. Pointed out by Marcelo Tosatti. Signed-off-by: Paul Mackerras <paulus@samba.org>
-