- 14 Nov, 2005 40 commits
-
-
Heiko Carstens authored
This patch reverts commit c33880aa since it's not needed anymore. As pointed out by Roland McGrath the real fix is to deliver all signals before returning to user space. See http://www.ussg.iu.edu/hypermail/linux/kernel/0509.2/0683.html A fix for s390 has been merged. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Fix some exit path bugs in the daemon driver. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
The access_ok_tt() macro is bogus, in that a read access is unconditionally considered valid. I couldn't find in SCM logs the introduction of this check, but I went back to 2.4.20-1um and the definition was the same. Possibly this was done to avoid problems with missing set_fs() calls, but there can't be any I think because they would fail with SKAS mode. TT-specific code is still to check. Also, this patch joins common code together, and makes the "address range wrapping" check happen for all cases, rather than for only some. This may, possibly, be reoptimized at some time, but the current code doesn't seem clever, just confused. * Important: I've also had to change references to access_ok_{tt,skas} back to access_ok - the kernel wasn't that happy otherwise. Signed-off-by: -
Paolo 'Blaisorblade' Giarrusso authored
Since the 4th param is unused, remove it altogether. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
We were using a long series of (stupid) wrappers which all call generic_console_write(). Since the wrappers only change the 4th param, which is unused by the called proc, remove them and call generic_console_write() directly. If needed at any time in the future to reintroduce this stuff, the member could be moved to a generic struct, to avoid this duplicated handling. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
printk clears the host errno (I verified this in debugging and it's reasonable enough, given that it ends via a write call on some fd, especially since printk() goes on /dev/tty0 which is often the host stdout). So save errno earlier. There's no reason to change the printk calls to use -err rather than errno - the assignment can't clear errno. And in the first failure path, we used to return 0 too (and this time more clearly), which is totally wrong. 0 is a success fd, which is then registered and gives a "registering fd twice" warning. Finally, fix up some whitespace. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
A few fixups - show the new submenu only for x86 subarchitecture (it does not make sense to show it for x86_64 users) and remove X86_CMPXCHG, which is now a duplicate of Kconfig.i386, even though Kconfig doesn't complain (we also miss the dependency on !M386 CPU). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Remove a stone-age comment (UM *does* have a MMU, i.e. the host), and fix a dependency (introduced in commit 02edeb58) to do what was intended. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
The below warning was added in place of pte_mkyoung(); if (is_write) pte_mkdirty(); In fact, if the PTE is not marked young/dirty, our dirty/accessed bit emulation would cause the TLB permission not to be changed, and so we'd loop, and given we don't support preemption yet, we'd busy-hang here. However, I've seen this warning trigger without crashes during a loop of concurrent kernel builds, at random times (i.e. like a race condition), and I realized that two concurrent faults on the same page, one on read and one on write, can trigger it. The read fault gets serviced and the PTE gets marked writable but clean (it's possible on a shared-writable mapping), while the generic code sees the PTE was already installed and returns without action. In this case, we'll see another fault and service it normally. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
In Uml, many definitions are borrowed from underlying subarch headers (with #include <asm/arch/stuff.h>). And it has become annoying to keep switching tag files all time, so by default index the underlying subarch headers too. Btw, it adds negligible space to the tags file (less than 1M surely, IIRC it was around 500k over 40M). Finally, preserve the ALLSOURCE_ARCHS command line option (I hope) - if it is set, it is used for headers too as before. But check my construct please, I didn't test this. Signed-off-by:
-
Roman Zippel authored
Remove task_work structure, use the standard thread flags functions and use shifts in entry.S to test the thread flags. Add a few local labels to entry.S to allow gas to generate short jumps. Finally it changes a number of inline functions in thread_info.h to macros to delay the current_thread_info() usage, which requires on m68k a structure (task_struct) not yet defined at this point. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Al Viro authored
a) added embedded thread_info [m68k processor.h] b) added missing symbols in asm-offsets.c c) task_thread_info() and friends in asm-m68k/thread_info.h d) made m68k thread_info.h included by m68k processor.h, not the other way round. Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Al Viro authored
a) in smp_lock.h #include of sched.h and spinlock.h moved under #ifdef CONFIG_LOCK_KERNEL. b) interrupt.h now explicitly pulls sched.h (not via smp_lock.h from hardirq.h as it used to) c) in three more places we need changes to compensate for (a) - one place in arch/sparc needs string.h now, hardirq.h needs forward declaration of task_struct and preempt.h needs direct include of thread_info.h. d) thread_info-related helpers in sched.h and thread_info.h put under ifndef __HAVE_THREAD_FUNCTIONS. Obviously safe. Signed-off-by:
-
Al Viro authored
encapsulates the rest of arch-dependent operations with thread_info access. Two new helpers - setup_thread_stack() and end_of_stack(). For normal case the former consists of copying thread_info of parent to new thread_info and the latter returns pointer immediately past the end of thread_info. Signed-off-by:
-
Al Viro authored
new helper - task_thread_info(task). On platforms that have thread_info allocated separately (i.e. in default case) it simply returns task->thread_info. m68k wants (and for good reasons) to embed its thread_info into task_struct. So it will (in later patch) have task_thread_info() of its own. For now we just add a macro for generic case and convert existing instances of its body in core kernel to uses of new macro. Obviously safe - all normal architectures get the same preprocessor output they used to get. Signed-off-by:
-
Tim Mann authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=5546 The cpu_khz global is not initialized and remains 0 if you boot with clock=pit, even if the processor does have a TSC. This may have bad ramifications since the variable is used in various places scattered around the kernel, though I didn't check them all to see if they can tolerate cpu_khz = 0. You can observe the problem by doing "cat /proc/cpuinfo"; the cpu MHz line says 0.000. The fix is trivial; call init_cpu_khz() from init_pit(), just as it's called from the timers/timer_foo.c:init_foo() for other values of foo. Cc: john stultz <johnstul@us.ibm.com> Signed-off-by:
-
Jan Beulich authored
Instruction pointer comparisons for the NMI on debug stack check/fixup were incorrect. From: Jan Beulich <jbeulich@novell.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Zwane Mwaikambo <zwane@holomorphy.com> Acked-by:
"Seth, Rohit" <rohit.seth@intel.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make a needlessly global function static - every file should include the headers containing the prototypes for it's global functions Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andrew Morton authored
arch/powerpc/xmon/xmon.c:525: error: syntax error before "xmon_irq" arch/powerpc/xmon/xmon.c:526: warning: return type defaults to `int' arch/powerpc/xmon/xmon.c: In function `xmon_irq': arch/powerpc/xmon/xmon.c:532: error: `IRQ_HANDLED' undeclared (first use in this function) arch/powerpc/xmon/xmon.c:532: error: (Each undeclared identifier is reported only once arch/powerpc/xmon/xmon.c:532: error: for each function it appears in.) Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Kumar Gala authored
The MPC8349 PIBs system has a expansion board with 6 PCI slots. We needed to update the IDSEL interrupt mapping for it to work properly. However, only PCI1 is supported as the first revision of this expansion board doesn't function properly for PCI2. For the time being we have zero'd out the entries for the IDSELs related to PCI2. When a functioning expansion board exists we can fix the table. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Olof Johansson authored
Enablement patch for the new PowerBooks (late 2005 edition). This enables the ATA controller, Gigabit ethernet and basic AGP setup. Bluetooth works out-of-the box after running hid2hci. Still remaining is to get the touchpad to work, the simple change of just adding the new USB ids isn't enough. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Christoph Lameter authored
The slab allocator never uses alloc_pages since kmem_getpages() is always called with a valid nodeid. Remove the branch and the code from kmem_getpages() Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Pekka Enberg authored
This patch converts object cache <-> page mapping macros to static inline functions to make the more explicit and readable. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Nick Piggin authored
The pages_high - pages_low and pages_low - pages_min deltas are the asynch reclaim watermarks. As such, the should be in the same ratios as any other zone for highmem zones. It is the pages_min - 0 delta which is the PF_MEMALLOC reserve, and this is the region that isn't very useful for highmem. This patch ensures highmem systems have similar characteristics as non highmem ones with the same amount of memory, and also that highmem zones get similar reclaim pressures to other zones. Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Paul Jackson authored
Remove last remnant of the defunct early reclaim page logic, the no longer used __GFP_NORECLAIM flag bit. Signed-off-by:
Paul Jackson <pj@sgi.com> Acked-by:
Martin Hicks <mort@bork.org> Signed-off-by:
-
Rohit Seth authored
Clean up of __alloc_pages. Restoration of previous behaviour, plus further cleanups by introducing an 'alloc_flags', removing the last of should_reclaim_zone. Signed-off-by:
-
Robin Holt authored
The address based work estimate for unmapping (for lockbreak) is and always was horribly inefficient for sparse mappings. The problem is most simply explained with an example: If we find a pgd is clear, we still have to call into unmap_page_range PGDIR_SIZE / ZAP_BLOCK_SIZE times, each time checking the clear pgd, in order to progress the working address to the next pgd. The fundamental way to solve the problem is to keep track of the end address we've processed and pass it back to the higher layers. From: Nick Piggin <npiggin@suse.de> Modification to completely get away from address based work estimate and instead use an abstract count, with a very small cost for empty entries as opposed to present pages. On 2.6.14-git2, ppc64, and CONFIG_PREEMPT=y, mapping and unmapping 1TB of virtual address space takes 1.69s; with the following patch applied, this operation can be done 1000 times in less than 0.01s From: Andrew Morton <akpm@osdl.org> With CONFIG_HUTETLB_PAGE=n: mm/memory.c: In function `unmap_vmas': mm/memory.c:779: warning: division by zero Due to zap_work -= (end - start) / (HPAGE_SIZE / PAGE_SIZE); So make the dummy HPAGE_SIZE non-zero Signed-off-by:
Robin Holt <holt@sgi.com> Signed-off-by:
-
Kirill Korotaev authored
In __alloc_pages(): if ((p->flags & (PF_MEMALLOC | PF_MEMDIE)) && !in_interrupt()) { /* go through the zonelist yet again, ignoring mins */ for (i = 0; zones[i] != NULL; i++) { struct zone *z = zones[i]; page = buffered_rmqueue(z, order, gfp_mask); if (page) { zone_statistics(zonelist, z); goto got_pg; } } goto nopage; <<<< HERE!!! FAIL... } kswapd (which has PF_MEMALLOC flag) can fail to allocate memory even when it allocates it with __GFP_NOFAIL flag. Signed-Off-By:Pavel Emelianov <xemul@sw.ru> Signed-Off-By:
Denis Lunev <den@sw.ru> Signed-Off-By:
Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Andrew Morton authored
Missing include. Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andrew Morton authored
drivers/pci/hotplug/pciehp_hpc.c:221: parse error before "pcie_isr" drivers/pci/hotplug/pciehp_hpc.c:221: warning: type defaults to `int' in declaration of `pcie_isr' drivers/pci/hotplug/pciehp_hpc.c:221: warning: data definition has no type or storage class drivers/pci/hotplug/pciehp_hpc.c: In function `hpc_release_ctlr': drivers/pci/hotplug/pciehp_hpc.c:715: implicit declaration of function `free_irq' drivers/pci/hotplug/pciehp_hpc.c: At top level: drivers/pci/hotplug/pciehp_hpc.c:839: parse error before "pcie_isr" drivers/pci/hotplug/pciehp_hpc.c:840: warning: return type defaults to `int' drivers/pci/hotplug/pciehp_hpc.c: In function `pcie_isr': drivers/pci/hotplug/pciehp_hpc.c:850: `IRQ_NONE' undeclared (first use in this function) drivers/pci/hotplug/pciehp_hpc.c:850: (Each undeclared identifier is reported only once drivers/pci/hotplug/pciehp_hpc.c:850: for each function it appears in.) drivers/pci/hotplug/pciehp_hpc.c:979: `IRQ_HANDLED' undeclared (first use in this function) drivers/pci/hotplug/pciehp_hpc.c: In function `pcie_init': drivers/pci/hotplug/pciehp_hpc.c:1362: implicit declaration of function `request_irq' Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Richard Purdie authored
Fix an error in w100fb after the platform device conversion. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Peter Osterlund authored
There is an old bug in the pkt_count_states() function that causes stack corruption. When compiling with gcc 3.x or 2.x it is harmless, but gcc 4 allocates local variables differently, which makes the bug visible. Signed-off-by:
Peter Osterlund <petero2@telia.com> Cc: <stable@kernel.org> Signed-off-by:
-
Bob Picco authored
It is wrong to acquire the semaphore and then return from cpuset_zone_allowed without releasing it. Signed-off-by:
Bob Picco <bob.picco@hp.com> Acked-by:
-
Antonino A. Daplas authored
nvidiafb_pan_display() is incorrectly using the fields in info->var instead of var passed to the function. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
akpm@osdl.org authored
(akpm: _machine is some ppc64 thing - this is a powerpc-only driver) Signed-off-by:
Serge Hallyn <serue@us.ibm.com> Signed-off-by:
-
Christoph Hellwig authored
When ptrace_attach fails we need to drop the task_struct reference. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Antonino A. Daplas authored
Exporting struct fb_display produces this warning error on depmod: WARNING: Module /lib/modules/2.6.14-mm2/kernel/drivers/video/console/fbcon_ud.ko ignored, due to loop WARNING: Module /lib/modules/2.6.14-mm2/kernel/drivers/video/console/fbcon_rotate.ko ignored, due to loop WARNING: Module /lib/modules/2.6.14-mm2/kernel/drivers/video/console/fbcon_cw.ko ignored, due to loop WARNING: Module /lib/modules/2.6.14-mm2/kernel/drivers/video/console/fbcon_ccw.ko ignored, due to loop WARNING: Module /lib/modules/2.6.14-mm2/kernel/drivers/video/console/fbcon.ko ignored, due to loop WARNING: Loop detected: /lib/modules/2.6.14-mm2/kernel/drivers/video/console/bitblit.ko needs Signed-off-by:
-
Andrew Morton authored
drivers/video/nvidia/nv_of.c:33: error: redefinition of `nvidia_probe_of_connector' drivers/video/nvidia/nv_proto.h:51: error: `nvidia_probe_of_connector' previously defined here Because the inline version depends on !CONFIG_FB_OF and the out-of-line version depends on CONFIG_PPC_OF. Ben said: "Yes, CONFIG_PPC_OF is the right one, must be a typo." Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> C: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Kumar Gala authored
Changed jobs and the Freescale address is no longer valid. Signed-off-by:
-
Harald Welte authored
Add new Omnikey Cardman 4000 smartcard reader driver Signed-off-by:
Harald Welte <laforge@gnumonks.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
