- 09 Sep, 2005 40 commits
-
-
NeilBrown authored
read_sb_page() assumed that if sync_page_io fails, the device would be marked faultly. However it isn't. So in the face of error, read_sb_page would loop forever. Redo the logic so that this cannot happen. Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
As this is used to flag an internal bitmap. Also, introduce symbolic names for feature bits. Signed-off-by:
-
NeilBrown authored
It is possibly (and occasionally useful) to have a raid1 without persistent superblocks. The code in add_new_disk for adding a device to such an array always tries to read a superblock. This will obviously fail. So do the appropriate test and call md_import_device with appropriate args. Signed-off-by:
-
NeilBrown authored
When hot-adding a bitmap, bitmap_daemon_work could get called while the bitmap is being created, so don't set mddev->bitmap until the bitmap is ready. This requires freeing the bitmap inside bitmap_create if creation failed part-way through. Signed-off-by:
-
NeilBrown authored
The 'lastrun' time wasn't being initialised, so it could be half a jiffie-cycle before it seemed to be time to do work again. Signed-off-by:
-
NeilBrown authored
A state of 0 mean 'not quiesced' A state of 1 means 'is quiesced' The original code got this wrong. Signed-off-by:
-
NeilBrown authored
linear currently uses division by the size of the smallest componenet device to find which device a request goes to. If that smallest device is larger than 2 terabytes, then the division will not work on some systems. So we introduce a pre-shift, and take care not to make the hash table too large, much like the code in raid0. Also get rid of conf->nr_zones, which is not needed. Signed-off-by:
-
NeilBrown authored
If a device is flagged 'WriteMostly' and the array has a bitmap, and the bitmap superblock indicates that write_behind is allowed, then write_behind is enabled for WriteMostly devices. Write requests will be acknowledges as complete to the caller (via b_end_io) when all non-WriteMostly devices have completed the write, but will not be cleared from the bitmap until all devices complete. This requires memory allocation to make a local copy of the data being written. If there is insufficient memory, then we fall-back on normal write semantics. Signed-Off-By:
Paul Clements <paul.clements@steeleye.com> Signed-off-by:
-
NeilBrown authored
This allows a device in a raid1 to be marked as "write mostly". Read requests will only be sent if there is no other option. Signed-off-by:
-
NeilBrown authored
Both file-bitmaps and superblock bitmaps are supported. If you add a bitmap file on the array device, you lose. This introduces a 'default_bitmap_offset' field in mddev, as the ioctl used for adding a superblock bitmap doesn't have room for giving an offset. Later, this value will be setable via sysfs. Signed-off-by:
-
NeilBrown authored
When we find a 'stale' bitmap, possibly because it is new, we should just assume every bit needs to be set, but rather base the setting of bits on the current state of the array (degraded and recovery_cp). Signed-off-by:
-
NeilBrown authored
... otherwise we loose a reference and can never free the file. Signed-off-by:
-
Jun'ichi Nomura authored
Fix another bug in dm-raid1.c that the dirty region may stay in or be moved to clean list and freed while in use. It happens as follows: CPU0 CPU1 ------------------------------------------------------------------------------ rh_dec() if (atomic_dec_and_test(pending)) <the region is still marked dirty> rh_inc() if the region is clean mark the region dirty and remove from clean list mark the region clean and move to clean list atomic_inc(pending) At this stage, the region is in clean list and will be mistakenly reclaimed by rh_update_states() later. Signed-off-by:Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
-
NeilBrown authored
md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by:
-
NeilBrown authored
'this_sector' is a virtual (array) address while 'head_position' is a physical (device) address, so substraction doesn't make any sense. devs[slot].addr should be used instead of this_sector. However, this patch doesn't make much practical different to the read balancing due to the effects of later code. Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Don't just irritate all other kernel developers. Fix the users first, then you can re-introduce the must-check infrastructure to avoid new cases creeping in. Signed-off-by: -
Linus Torvalds authored
Fix up fs/compat.c fixes.
-
Daniel Ritz authored
This fixes the problem with "Averatec 6240 pcmcia_socket0: unable to apply power", which was due to the CardBus IOMEM register region being allocated at an address that was actually inside the RAM window that had been reserved for video frame-buffers in an UMA setup. The BIOS _should_ have marked that region reserved in the e820 memory descriptor tables, but did not. It is fixed by rounding up the default starting address of PCI memory allocations, so that we leave a bigger gap after the final known memory location. The amount of rounding depends on how big the unused memory gap is that we can allocate IOMEM from. Based on example code by Linus. Acked-by:
Greg KH <greg@kroah.com> Acked-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Andrew lost this in patch reject resolution, and never noticed, since the compat code isn't in use on x86. Signed-off-by: -
Linus Torvalds authored
-
Kirill Korotaev authored
This patch adds lost sockfd_put() in 32bit compat rounting_ioctl() on 64bit platforms Signed-Off-By:
Kirill Korotaev <dev@sw.ru> Signed-Off-By:
Maxim Giryaev <gem@sw.ru> Signed-off-By:
-
Kirill Korotaev authored
This adds a lost fput in 32bit tiocgdev ioctl on x86-64 [ chrisw: Updated to use fget_light/fput_light ] Signed-Off-By:
Chris Wright <chrisw@osdl.org> Signed-off-by:
-
Sam Ravnborg authored
um has it own set of files for asm-offsets. So for now the gen-asm-offset macro is just duplicated in the um Makefile. This may well be the final solution since um is a bit special compared to other architectures - time will tell. Also added a dummy arch/um/kernel/asm-offsets.h file to keep kbuild happy. Signed-off-by:Sam Ravnborg <sam@ravnborg.org>
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
-
Ingo Molnar authored
This converts the final 20 DEFINE_SPINLOCK holdouts. (another 580 places are already using DEFINE_SPINLOCK). Build tested on x86. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ingo Molnar authored
Clean up timer initialization by introducing DEFINE_TIMER a'la DEFINE_SPINLOCK. Build and boot-tested on x86. A similar patch has been been in the -RT tree for some time. Signed-off-by:
-
Miklos Szeredi authored
This patch removes ability to interrupt and restart operations while there hasn't been any side-effect. The reason: applications. There are some apps it seems that generate signals at a fast rate. This means, that if the operation cannot make enough progress between two signals, it will be restarted for ever. This bug actually manifested itself with 'krusader' trying to open a file for writing under sshfs. Thanks to Eduard Czimbalmos for the report. The problem can be solved just by making open() uninterruptible, because in this case it was the truncate operation that slowed down the progress. But it's better to solve this by simply not allowing interrupts at all (except SIGKILL), because applications don't expect file operations to be interruptible anyway. As an added bonus the code is simplified somewhat. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Miklos Szeredi authored
This patch adds a new FSYNCDIR request, which is sent when fsync is called on directories. This operation is available in libfuse 2.3-pre1 or greater. Signed-off-by:
-
Miklos Szeredi authored
Don't change mtime/ctime/atime to local time on read/write. Rather invalidate file attributes, so next stat() will force a GETATTR call. Bug reported by Ben Grimm. Signed-off-by:
-
Miklos Szeredi authored
Make data caching behavior selectable on a per-open basis instead of per-mount. Compatibility for the old mount options 'kernel_cache' and 'direct_io' is retained in the userspace library (version 2.4.0-pre1 or later). Signed-off-by:
-
Miklos Szeredi authored
This patch removes a long lasting "hack" in FUSE, which used a separate channel (a file descriptor refering to a disk-file) to transfer directory contents from userspace to the kernel. The patch adds three new operations (OPENDIR, READDIR, RELEASEDIR), which have semantics and implementation exactly maching the respective file operations (OPEN, READ, RELEASE). This simplifies the directory reading code. Also disk space is not necessary, which can be important in embedded systems. Signed-off-by:
-
Miklos Szeredi authored
This patch adds support for the "direct_io" mount option of FUSE. When this mount option is specified, the page cache is bypassed for read and write operations. This is useful for example, if the filesystem doesn't know the size of files before reading them, or when any kind of caching is harmful. Signed-off-by:
-
Miklos Szeredi authored
Check for the presence of all mandatory mount options. Signed-off-by:
-
Miklos Szeredi authored
This patch tightens the check for allowing processes to access non-privileged mounts. The rational is that the filesystem implementation can control the behavior or get otherwise unavailable information of the filesystem user. If the filesystem user process has the same uid, gid, and is not suid or sgid application, then access is safe. Otherwise access is not allowed unless the "allow_other" mount option is given (for which policy is controlled by the userspace mount utility). Thanks to everyone linux-fsdevel, especially Martin Mares who helped uncover problems with the previous approach. Signed-off-by:
-
