- 27 Jul, 2005 40 commits
-
-
Matt Porter authored
The following trivial patch changes dma_map_page() to use page_to_bus() instead of open-coding it (incorrectly in some cases). Signed-off-by:
Eugene Surovegin <ebs@ebshome.net> Signed-off-by:
Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Kumar Gala authored
Updated radstone_ppc7d_defconfig to include the ds1337 driver which is used by the platform code. This fixes the link error when building. Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
-
Kumar Gala authored
Updated prpmc750 platform code to include serial_reg.h to fix building. Signed-off-by:
-
Kumar Gala authored
Typo bug that was using PCI1 defines instead of PCI2 when setting up the second PCI bus controller on 85xx based systems. This hasn't been a real issue since currently the PCI2 sizes are the same as the PCI1 sizes for currently supported boards. Thanks to Andrew Klossner @ Xerox for point this out. Signed-off-by:
-
Downing, Thomas authored
The 2.6.12.3 kernel compilation fails for ARCH=ppc when CONFIG_PQ2FADS=y. This patch has been tested on Freescale PQ2FADS-ZU and -VR boards. Signed-off-by:
-
Marcelo Tosatti authored
On PPC 8xx, the DataTLBMiss handler does not jump directly to the page fault handler, as was the case in v2.4. It instead loads an invalid TLB which causes a subsequent DataTLBError exception. The comment on top of it haven't been update to reflect the change, though. Signed-off-by:
Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by:
-
Kumar Gala authored
The UARTs on the MPC824x are unique devices and really shouldn't be thought of as a DUART. In addition, if both UARTs are in use we need to configure the part to enable the 2nd UART since the pins for the UARTs are multiplexed. Adds support to run the 824x Sandpoint with both UARTs if desired. Signed-off-by:
Matt McClintock <msm@freescale.com> Signed-off-by:
-
Kumar Gala authored
Added a proper prototype for cpm2_reset() which gets rid of a build warning. Signed-off-by:
Jon Loeliger <jdl@freescale.com> Signed-off-by:
-
Olaf Hering authored
update pmac_defconfig enable all relevant options in common_defconfig, so it can serve as a compiletest for PPC_MULTIPLATFORM configuration Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Olaf Hering authored
use new Kconfig.hz on ppc/ppc64, use also Kconfig.preempt for ppc Signed-off-by:
-
Andy Whitcroft authored
Originally __free_pages_bulk used the relative page number within a zone to define its buddies. This meant that to maintain the "maximally aligned" requirements (that an allocation of size N will be aligned at least to N physically) zones had to also be aligned to 1<<MAX_ORDER pages. When __free_pages_bulk was updated to use the relative page frame numbers of the free'd pages to pair buddies this released the alignment constraint on the 'left' edge of the zone. This allows _either_ edge of the zone to contain partial MAX_ORDER sized buddies. These simply never will have matching buddies and thus will never make it to the 'top' of the pyramid. The patch below removes a now redundant check ensuring that the mem_map was aligned to MAX_ORDER. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <christoph@lameter.com> Signed-off-by:
-
suzuki authored
The madvise() system call returns -EBADF for areas which does not map to files, only for *behaviour* request MADV_WILLNEED. According to man pages, madvise returns : EBADF - the map exists, but the area maps something that isn't a file. Fixes bug 2995. Signed-off-by:
Suzuki K P <suzuki@in.ibm.com> Signed-off-by:
-
Andrey Panin authored
Attached patch removes #ifdef CONFIG_WATCHDOG_NOWAYOUT mess duplicated in almost every watchdog driver and replaces it with common define in linux/watchdog.h. Signed-off-by:
Andrey Panin <pazke@donpac.ru> Signed-off-by:
-
Brian Gerst authored
powernow-k8.c: In function `query_current_values_with_pending_wait': powernow-k8.c:110: warning: `hi' may be used uninitialized in this function Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
David Ranson authored
Add support for the MRi PCIDS1 dual port serial card. This card is a little controversial since it is the subject of a PCI vendor/device ID clash. (See http://www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). I have for now just used the hex ID 0x950a. The divisor was part calculated part iterated, so may not be exactly correct (but works for me at all settings between 300 - 115300 bps). Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andrew Morton authored
For some reason halfmd4 isn't being linked into the kernel any more and modular ext3 wants it. So statically link the halfmd4 code into the kernel. Signed-off-by:
-
Andrew Morton authored
Fix bug identifued by Richard Purdie <rpurdie@rpsys.net>. oprofile calls check_user_page_readable() from interrupt context, so we deadlock over various VFS locks. But check_user_page_readable() doesn't imply either a read or a write of the page's contents. Change __follow_page() so that check_user_page_readable() can tell __follow_page() that we're not accessing the page's contents, and use that info to avoid the troublesome lock-takings. Also, make follow_page() inline for the single callsite in memory.c to save a bit of stack space. Signed-off-by:
-
Carsten Otte authored
Oliver Paukstadt from our test department is testing the xip patches in Linus' git-tree. He found a problem that shows when reading a file that contains sparse blocks (holes) on a -o xip mounted ext2 filesystem: the BUG_ON() in fs/ext2/xip.c:40 triggers where it should not. The problem was introduced by a cleanup in my previous patch, this patch fixes it. Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Pete Zaitcev authored
This patch fixes a microcode lockup in my CD-ROM adapters when a blank CD is inserted. However, do not try to burn CDs yet! I'm pretty sure that trying it will end in coasters. - Fix a few cases where we were unable to resynchronize with replies for previous commands. The main thing is to keep reading replies in case of a stall. This is done with the new state CLRRS. - Since I am forgetting the basic state machine already, document it. - Move counter increments in the looping path in its own function. - Fix a harmless buglet in case CSW read fails to submit: do not override state. - Implement the Alan Stern's idea for adaptive signature checking. Signed-off-by:
Pete Zaitcev <zaitcev@yahoo.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andi Kleen authored
All mempolicy changes must be inside the spinlock and readding the rb_erase prevents a crash while doing: > echo "1" > /tmp/numatest > numactl --length=0x4000 --shm /tmp/numatest --localalloc > numactl --length=0x2000 --offset=0 --shm /tmp/numatest --membind=0 > numactl --length=0x2000 --offset=0x2000 --shm /tmp/numatest --membind=1 > ipcs > ipcrm -M "the_key_value_of_this_shm_area" Based on a patch by John Blackwood Cc: <john.blackwood@ccur.com> Cc: <andrea@suse.de> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
V. ANANDA KRISHNAN authored
- updates the version - fix mixing of declarations and code. The mixing of declarations and code displays warnings when used against RedHat RHEL4.0 distro (compiler version is 3.4.3-22.1) and hence I separated them out. Signed-off-by:
-
V. ANANDA KRISHNAN authored
The jsm driver uses a static number of 253. The major number 253 is a reserved for "LOCAL/EXPERIMENTAL USE" by both char and block devices. So take advantage of the dynamic allocation of major number by the kernel. Signed-off-by:
V. Ananda Krishnan <mansarov@us.ibm.com> Signed-off-by:
-
Olivier Blin authored
This patch adds support for the Olitec ISDN PCI card in the hisax gazel driver. The gazel driver supports this card, but wasn't aware of its PCI ids. Users used to modify the PCI ids of a supported card in include/linux/pci_ids.h and recompile their kernel to get this card running, as said in most Howtos. This patch makes the hisax gazel driver recognize the PCI ids of the Olitec ISDN PCI card. Signed-off-by:
Olivier Blin <oblin@mandriva.com> Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Alan Stern authored
Adds a missing check for an error return code from scsi_sysfs_add_sdev. This resolves entry #4863 in the OSDL bugzilla. Although in that bug report the failure occurred because of a confusion over scanning vs. rescanning, in general add_sdev can fail for a number of reasons (the simplest being insufficient memory) and the caller should cope properly. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
-
Ian Kent authored
If the automount daemon receives a signal which causes it to sumarily terminate the autofs4 module leaks dentries. The same problem exists with detached mount requests without the warning. This patch cleans these dentries at umount. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Dominik Brodowski authored
Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Acked-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
George Anzinger authored
Fix the recent off-by-one fix in the itimer code: 1. The repeating timer is figured using the requested time (not +1 as we know where we are in the jiffie). 2. The tests for interval too large are left to the time_val to jiffie code. Signed-off-by:
George Anzinger <george@mvista.com> Signed-off-by:
-
Rolf Eike Beer authored
Usually the device IDs are given in hex. This one is a bit strange: it is without 0x in the first place and used with it some lines later. I suspect the first one to be the wrong. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Nigel Cunningham authored
This patch fixes a warning in the disable_nonboot_cpus call in kernel/power/smp.c. Signed-off by: Nigel Cunningham <nigel@suspend2.net> Signed-off-by:
-
Adrian Bunk authored
drivers/pnp/pnpbios/rsparser.c: In function 'pnpbios_parse_allocated_irqresource': drivers/pnp/pnpbios/rsparser.c:67: error: too many arguments to function 'pcibios_penalize_isa_irq' Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Jan Kara authored
We must drop references to quota structures before releasing the inode. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
We must drop references to quota structures before releasing the inode. Signed-off-by:
-
Jeff Mahoney authored
reiserfs_new_inode() can call iput() with the xattr lock held. This will cause a deadlock to occur when reiserfs_delete_xattrs() is called to clean up. The following patch releases the lock and reacquires it after the iput. This is safe because interaction with xattrs is complete, and the relock is just to balance out the release in the caller. The locking needs some reworking to be more sane, but that's more intrusive and I was just looking to fix this bug. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jens Axboe authored
AS is doing internal msec<->jiffies conversions twice, so the sysfs tunables which represent time are coming out wrong. The switch from HZ=1000 exposed this. Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Nigel Cunningham authored
Here's a patch to fix a missing refrigerator call in jffs2. Signed-off-by:
Nigel Cunningham <nigel@suspend2.net> Signed-off-by:
-
Nigel Cunningham authored
Tvaudio lacks a refrigerator call. This patch fixes that. Signed-off-by:
Nigel Cunningham <ncunningham@suspend2.net> Cc: <video4linux-list@redhat.com> Signed-off-by:
-
Nigel Cunningham authored
Here are fixes for four try_to_freeze calls that are still (incorrectly) using a parameter after the recent try_to_freeze() changes. Signed-off-by:
-
Andi Kleen authored
Fixes boot up lockups on some machines where CPU apic ids don't start with 0 Signed-off-by:
-
Jeff Dike authored
This fixes an interface which differed from its declaration, and includes the relevant header so that this doesn't happen again. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
