- 01 Nov, 2006 5 commits
-
-
Akinobu Mita authored
- Call platform_driver_unregister() before return when no cards found. (fixes data corruption when no cards found) - Check platform_device_register_simple() return value Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Mike Phillips <mikep@linuxtr.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> drivers/net/tokenring/proteon.c | 9 +++++++-- drivers/net/tokenring/skisa.c | 9 +++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Lennert Buytenhek authored
Flooding the console with error messages for every RX FIFO overrun, checksum error and framing error isn't very sensible. Each of these errors can occur during normal operation, so stop printk'ing error messages for RX errors at all. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Lennert Buytenhek authored
Fix unlikely(x) > y test in ep93xx_eth. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Lennert Buytenhek authored
Ray Lehtiniemi reported that an incoming UDP packet flood can lock up the ep93xx ethernet driver. Herbert Valerio Riedel noted that due to the way ep93xx_eth manages the RX/TXstatus rings, it cannot distinguish a full ring from an empty one, and correctly suggested that this was likely to be causing this lockup to occur. Instead of looking at the hardware's RX/TXstatus ring write pointers to determine when to stop reading from those rings, we should just check every individual RX/TXstatus descriptor's valid bit instead, since there is no other way to distinguish an empty ring from a full ring, and if there is a descriptor waiting, we take the hit of reading the descriptor from memory anyway. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Linus Torvalds authored
* 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Correct definition of handle_IPI [IA64] move SAL_CACHE_FLUSH check later in boot [IA64] MCA recovery: Montecito support [IA64] cpu-hotplug: Fixing confliction between CPU hot-add and IPI [IA64] don't double >> PAGE_SHIFT pointer for /dev/kmem access
-
- 31 Oct, 2006 35 commits
-
-
Keith Owens authored
The declaration of handle_IPI in arch/ia64/kernel/smp.c was changed but not the definition of this function. Remove struct pt_regs from handle_IPI(). Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Troy Heber authored
The check to see if the firmware drops interrupts during a SAL_CACHE_FLUSH is done to early in the boot. SAL_CACHE_FLUSH expects to be able to make PAL calls in virtual mode, on some cell based machines a fault occurs causing a MCA. This patch moves the check after mmu_context_init so the TLB and VHPT are properly setup. Signed-off-by Troy Heber <troy.heber@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Russ Anderson authored
The information in MCA records is filled in slightly differently on Montecito than on Madison/McKinley. Usually, the cache check and bus check target identifiers have the same address. On Montecito the cache check and bus check target identifiers can be different if a corrected error (ie SBE or unconsumed poison data) was encountered and then an uncorrected error (ie DBE) was consumed. In that case, the cache check target identifier is the physical address of the DBE (that caused the MCA to surface) while the bus check target identifier is the physical address of the SBE. This patch correctly finds the target identifier that triggered the MCA. If there are multiple valid cache target identifiers in the same error record then use the one with the lowest cache level. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Kenji Kaneshige authored
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Atsushi Nemoto authored
Since we already moved to GENERIC_TIME, we should implement alternatives of old do_gettimeoffset routines to get sub-jiffies resolution from gettimeofday(). This patch includes: * MIPS clocksource support (based on works by Manish Lachwani). * remove unused gettimeoffset routines and related codes. * remove unised 64bit do_div64_32(). * simplify mips_hpt_init. (no argument needed, __init tag) * simplify c0_hpt_timer_init. (no need to write to c0_count) * remove some hpt_init routines. * mips_hpt_mask variable to specify bitmask of hpt value. * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read. * convert ip27_do_gettimeoffset to ip27_hpt_read. * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read. * simplify sb1250 hpt functions. (no need to subtract and shift) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
arch/mips/kernel/traps.c:1115: warning: int format, long unsigned int arg (arg 2) Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Manish Lachwani authored
Signed-off-by: Manish Lachwani <mlachwani@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Randy Dunlap authored
SCSI_QLA_ISCSI needs to depend on NET to prevent build (link) failures that are caused by selecting SCSI_ISCSI_ATTRS. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jens Axboe authored
In very rare circumstances would we be pruning a merged request and at the same time delete the implicated cfqq from the rr_list, and not readd it when the merged request got added. This could cause io stalls until that process issued io again. Fix it up by putting the rr_list add handling into cfq_add_rq_rb(), identical to how pruning is handled in cfq_del_rq_rb(). This fixes a hang reproducible with fsx-linux. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Titan defconfig update. sh: Fix IPR-IRQ's for IRQ-chip change breakage. sh: Update r7780rp_defconfig. video: Fix include in hp680_bl. sh: Wire up new syscalls.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV6]: fix flowlabel seqfile handling [IPV6]: return EINVAL for invalid address with flowlabel lease request [SCTP]: Remove temporary associations from backlog and hash. [SCTP]: Correctly set IP id for SCTP traffic [NetLabel]: protect the CIPSOv4 socket option from setsockopt() [NETFILTER]: ip_tables: compat code module refcounting fix [NETFILTER]: nf_conntrack: add missing unlock in get_next_corpse() [NETFILTER]: ip_tables: compat error way cleanup [NETFILTER]: Missed and reordered checks in {arp,ip,ip6}_tables [NETFILTER]: remove masq/NAT from ip6tables Kconfig help [IPV6]: fix lockup via /proc/net/ip6_flowlabel [NET]: fix uaccess handling [SCTP]: Always linearise packet on input [ETH1394]: Fix unaligned accesses. [DCCP]: fix printk format warnings [NET]: Fix segmentation of linear packets [XFRM] xfrm_user: Fix unaligned accesses. [APPLETALK]: Fix potential OOPS in atalk_sendmsg(). [NET] sealevel: uses arp_broken_ops
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add some missing print_symbol() calls. [SPARC64]: Fix Tomatillo/Schizo IRQ handling.
-
NeilBrown authored
Partitions are not limited to live within a device. So we should range check after partition mapping. Note that 'maxsector' was being used for two different things. I have split off the second usage into 'old_sector' so that maxsector can be still be used for it's primary usage later in the function. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Halcrow authored
Fix the use of dget/dput calls to balance out on the lower filesystem. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Halcrow authored
There is no point to calling the lower umount_begin when the eCryptfs umount_begin is called. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Halcrow authored
Opens on lower dentry objects happen in several places in eCryptfs, and they all involve the same steps (dget, mntget, dentry_open). This patch consolidates the lower open events into a single function call. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Halcrow authored
Update cipher block encryption code to the new crypto API. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Halcrow authored
Update eCryptfs hash code to the new kernel crypto API. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Michael Halcrow authored
Clean up the crypto initialization code; let the crypto API take care of the key size checks. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Oleg Nesterov authored
If there are no listeners, taskstats_exit_send() just returns because taskstats_exit_alloc() didn't allocate *tidstats. This is wrong, each sub-thread should do fill_tgid_exit() on exit, otherwise its ->delays is not recorded in ->signal->stats and lost. Q: We don't send TASKSTATS_TYPE_AGGR_TGID when single-threaded process exits. Is it good? How can the listener figure out that it was actually a process exit, not sub-thread? Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Balbir Singh <balbir@in.ibm.com> Acked-by: Shailabh Nagar <nagar@watson.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
This is the UML piece of the INITCALLS tidying. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
kallsyms now refers to addresses as '_text + 0xADDRESS', rather than just '0xADDRESS', so we need to define _text. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Fix a small memory leak in ubd_config, and clearify the confusion which lead to it. Then, some little changes not affecting operations - * move init functions together, * add a comment about a potential problem in case of some evolution in the block layer, * mark all initcalls as static __init functions * mark an used once little function as inline * document that mconsole methods are all called in process context (was triggered when checking ubd mconsole methods). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
To simplify error handling, make sure fd is saved into ubd_dev->fd only when we are sure it is an fd and not an error code. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Use bitfields for boolean fields in ubd data structure. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Pure whitespace and style fixes split out from subsequent patch. Some changes (err -> ret) don't make sense now, only later, but I split them out anyway since they cluttered the patch. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
do_ubd is actually just a boolean variable - the way it is used currently is a leftover from the old 2.4 block layer, but it is still used; its use is suspicious, but removing it would be too intrusive for now and needs more thinking. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
Add some comments about requirements for ubd_io_lock and expand its use. When an irq signals that the "controller" (i.e. another thread on the host, which does the actual requests and is the only one blocked on I/O on the host) has done some work, we call again the request function ourselves (do_ubd_request). We now do that with ubd_io_lock held - that's useful to protect against concurrent calls to elv_next_request and so on. XXX: Maybe we shouldn't call at all the request function. Input needed on this. Are we supposed to plug and unplug the queue? That code "indirectly" does that by setting a flag, called do_ubd, which makes the request function return (it's a residual of 2.4 block layer interface). Meanwhile, however, merge this patch, which improves things. Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
This lock protects ubd setup and teardown, so is only used in process context; beyond that, during such setup memory allocations must be performed and some generic functions which can sleep must be called (such as add_disk()). So the only correct solution is to make it a mutex instead of a spin_lock. No other change is done - this lock must be acquired in different places but it's done afterwards. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-