- 04 Dec, 2006 40 commits
-
-
Mariusz Kozlowski authored
Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (82 commits) [PATCH] pata_ali: small fixes [PATCH] pata_via: VIA 8251 bridged systems are now out and about [PATCH] trivial piix: swap bogus dot for comma space [PATCH] sata_promise: PHYMODE4 fixup [PATCH] libata: always use polling IDENTIFY [libata] pata_cs5535: fix build [PATCH] ahci: do not powerdown during initialization [PATCH] libata: prepare ata_sg_clean() for invocation from EH [PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() [PATCH] libata: implement ata_exec_internal_sg() [PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze() [PATCH] libata: move BMDMA host status recording from EH to interrupt handler [PATCH] libata: make sure sdev doesn't go away while rescanning [PATCH] libata: don't request sense if the port is frozen [PATCH] libata: fix READ CAPACITY simulation [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2 [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs [PATCH] libata: remove unused HSM_ST_UNKNOWN [PATCH] libata: kill unnecessary sht->max_sectors initializations [PATCH] libata: add missing sht->slave_destroy ...
-
Alan authored
Switch to pci_get_bus_and_slot because some x86 systems seem to be handing us a device with dev->bus = NULL. Also don't apply the isa fixup to revision C6 and later of the chip. Really we need to work out wtf is handing us pdev->bus = NULL, but firstly and more importantly we need the drivers working. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Alan authored
Signed-off-by:
-
Alan authored
Signed-off-by:
-
Al Viro authored
OK, that seems to be enough to deal with the mess. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This was exposed by Al's recent header file dependency reduction patches.. Cc: Al Viro <viro@ftp.linux.org.uk> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: -
Linus Torvalds authored
* 'for-linus4' of master.kernel.org:/pub/scm/linux/kernel/git/viro/bird: [PATCH] severing poll.h -> mm.h [PATCH] severing skbuff.h -> mm.h [PATCH] severing skbuff.h -> poll.h [PATCH] severing skbuff.h -> highmem.h [PATCH] severing uaccess.h -> sched.h [PATCH] severing fs.h, radix-tree.h -> sched.h [PATCH] severing module.h->sched.h
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [SUNHME]: Fix for sunhme failures on x86 [XFRM] xfrm_user: Better validation of user templates. [DCCP] tfrc: Binary search for reverse TFRC lookup [DCCP] ccid3: Deprecate TFRC_SMALLEST_P [DCCP] tfrc: Identify TFRC table limits and simplify code [DCCP] tfrc: Add protection against invalid parameters to TFRC routines [DCCP] tfrc: Fix small error in reverse lookup of p for given f(p) [DCCP] tfrc: Document boundaries and limits of the TFRC lookup table [DCCP] ccid3: Fix warning message about illegal ACK [DCCP] ccid3: Fix bug in calculation of send rate [DCCP]: Fix BUG in retransmission delay calculation [DCCP]: Use higher RTO default for CCID3
-
David Woodhouse authored
Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (34 commits) [S390] Don't use small stacks when lockdep is used. [S390] cio: Use device_reprobe() instead of bus_rescan_devices(). [S390] cio: Retry internal operations after vary off. [S390] cio: Use path verification for last path gone after vary off. [S390] non-unique constant/macro identifiers. [S390] Memory detection fixes. [S390] cio: Make ccw_dev_id_is_equal() more robust. [S390] Convert extmem spin_lock into a mutex. [S390] set KBUILD_IMAGE. [S390] lockdep: show held locks when showing a stackdump [S390] Add dynamic size check for usercopy functions. [S390] Use diag260 for memory size detection. [S390] pfault code cleanup. [S390] Cleanup memory_chunk array usage. [S390] Misaligned wait PSW at memory detection. [S390] cpu shutdown rework [S390] cpcmd <-> __cpcmd calling issues [S390] Bad kexec control page allocation. [S390] Reset infrastructure for re-IPL. [S390] Some documentation typos. ...
-
Greg Ungerer authored
This patch adds missing bracket. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
Make the m68knommu DMA handling consistent with other architectures. Compile problems pointed out by Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Greg Ungerer authored
Remove use of __rom_end symbol all together. This helps clean out the miscellaneous symbols lying around in the m68knommu linker script. Signed-off-by:
-
Greg Ungerer authored
Here is a small patch to automatically detect the DRAM size on m520x. It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board. (This part of the patch if the memory register defines for the 520x ColdFire CPU family - Greg). Signed-off-by:
Michael Broughton <mbobowik@telusplanet.net> Signed-off-by:
-
Michael Broughton authored
Here is a small patch to automatically detect the DRAM size on m520x. It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board. Signed-off-by:
-
David Wu authored
It turns out SHMAT, SHMDT, SHMGET and SHMCTL support in sys_ipc() for m68knommu in 2.6 kernel(uClinux-dist-20060803 release) is missing. (copied from m68k sources, report by David Wu <davidwu@arcturusnetworks.com>) Signed-off-by:
-
Greg Ungerer authored
Specify printk level in m68knommu stack dump code. Signed-off-by:
-
Greg Ungerer authored
Specify printk level in m68knommu oops dump code. Signed-off-by:
-
Adrian Bunk authored
This patch fixes the following compile error with CONFIG_BLK_DEV_INITRD=n and -Werror-implicit-function-declaration: ... CC arch/m68knommu/kernel/setup.o /home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/arch/m68knommu/kernel/setup.c: In function 'setup_arch': /home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/arch/m68knommu/kernel/setup.c:268: error: implicit declaration of function 'paging_init' make[2]: *** [arch/m68knommu/kernel/setup.o] Error 1 Signed-off-by:Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Greg Ungerer authored
Formatting and a spelling cleanup in m68knommu Kconfig. Signed-off-by:
-
Heiko Carstens authored
The lock dependency validator adds a bunch of extra stack frames to the stack, which can cause stack overflows. Especially seen on 31 bit where the small stack is only 4k. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Cornelia Huck authored
In io_subchannel_register(), it is better to just reprobe the current device if it hasn't a driver yet than to rescan the whole bus. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Cornelia Huck authored
If I/O was running on a just varied off chpid, it will be terminated. If this was a common I/O layer internal I/O, it needs to be retried. Signed-off-by:
-
Cornelia Huck authored
If the last path to a device is gone after a chpid has been varied off, putting it on the slow queue doesn't prevent a device driver from still attempting to use it (it may stay on the slow queue for a long time). Instead, trigger a verify event which will prevent I/O attempts from the device driver immediately. Signed-off-by:
-
Ursula Braun authored
Add some prefixes to constands defined in drivers/s390/net/qdio.h and drivers/s390/lcs.h to make it possible to include the three header files drivers/s390/net/qeth.h, drivers/s390/net/qdio.h and drivers/net/s390/lcs.h in one C file. This is required for the patch that generates the kerntypes.o file for use by lcrash. Signed-off-by:
Ursula Braun <braunu@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
VMALLOC_END on 31bit should be 0x8000000UL instead of 0x7fffffffL. The page mask which is used to make sure memory_end is on 4MB/2MB boundary is wrong and not needed. Therefore remove it. Make sure a vmalloc area does also exist and work on (future) machines with 4TB and more memory. Signed-off-by:
-
Cornelia Huck authored
Using memcmp to compare ccw_dev_id implies that the whole structure (incl. padding) has always been completely initialized to sane values. Comparing the structures field by field doesn't make such assumptions. Signed-off-by:
-
Heiko Carstens authored
There's no need to have a spin_lock here, but need sleepable context for vmem_map. Therefore convert the spin_lock into a mutex. Signed-off-by:
-
Christian Borntraeger authored
Set KBUILD_IMAGE to a sane value. This enables "make rpm" Signed-off-by:
Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Follow i386/x86_64: lockdep can be used to print held locks when printing a backtrace. This can be useful when debugging things like 'scheduling while atomic' asserts. Signed-off-by:
-
Gerald Schaefer authored
Use a wrapper for copy_to/from_user to chose the best usercopy method. The mvcos instruction is better for sizes greater than 256 bytes, if mvcos is not available a page table walk is better for sizes greater than 1024 bytes. Also removed the redundant copy_to/from_user_std_small functions. Signed-off-by:
Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Avoid the tprot loop if diag260 works and reports that there are no holes in memory. The tprot instruction can lead to a significant delay in the ipl process if the virtual guest has a lot of memory and the host is under memory pressure. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
Need this at yet another file and don't want to add yet another extern... Signed-off-by:
-
Heiko Carstens authored
If the memory detection code would ever reach the point where it would load the wait psw, it would generate a specification exception and the system would crash at ipl time. This is because of a misaligned wait psw. It needs to be on a double word boundary instead of a word boundary. Signed-off-by:
-
Heiko Carstens authored
Let one master cpu kill all other cpus instead of sending an external interrupt to all other cpus so they can kill themselves. Simplifies reipl/shutdown functions a lot. Signed-off-by:
-
Heiko Carstens authored
In case of reipl cpcmd gets called when all other cpus are not running anymore. To prevent deadlocks change __cpcmd so that it doesn't take any locks and call cpcmd or __cpcmd, whatever is correct in the current context. Signed-off-by:
-
Heiko Carstens authored
KEXEC_CONTROL_MEMORY_LIMIT is an unsigned long value and therefore should be defined as one. Otherwise the kexec control page can be allocated above 2GB which will cause a specification exception on the sam31 instruction in the s390 kexec relocation code. Signed-off-by:
-
Heiko Carstens authored
In case of re-IPL and diag308 doesn't work we have to reset all devices manually and wait synchronously that each reset finished. This patch adds the necessary infrastucture and the first exploiter of it. Subsystems that need to add a function that needs to be called at re-IPL may register/unregister this function via struct reset_call { struct reset_call *next; void (*fn)(void); }; void register_reset_call(struct reset_call *reset); void unregister_reset_call(struct reset_call *reset); When the registered function get called the context is: - all cpus beside the current one are stopped - all machine checks and interrupts are disabled - prefixing is disabled - a default machine check handler is available for use The registered functions may not take any locks are sleep. For the common I/O layer part of this patch: Introduce a reset_call css_reset that does the following: - clear all subchannels - perform a rchp on all channel paths and wait for the resulting machine checks This replaces the calls to clear_all_subchannels() and cio_reset_channel_paths() for kexec and ccw reipl. reipl_ccw_dev() now uses reipl_find_schid() to determine the subchannel id for a given device id. Also remove cio_reset_channel_paths() and friends since they are not needed anymore. Signed-off-by:
-
