It could be in a memory hole not mapped in mem_map and that causes the hash
lookup to go off to nirvana.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Needed by big systems and only costs a few K of memory.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Last round hopefully of cpu_core_id changes hopefully fow now:

- Always initialize cpu_core_id for all CPUs, even when no dual core setup
  is detected.  This prevents funny /proc/cpuinfo output

- Do the same with phys_proc_id[] even when no HyperThreading - dito.

- Use the CPU APIC-ID from CPUID 1 instead of the linux virtual CPU number
  to identify the core for AMD dual core setups.

Patch for i386/x86-64.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This works around a bug in the AMD K8 CPUs.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Cleans up the system exit call slightly and synchronizes with my tree again.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

NR_CPUs can be quite big these days.  kmalloc the per CPU array instead of
putting it onto the stack
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes mm->total_vm and mm->locked_vm acctounting in case when
move_page_tables() fails inside move_vma().
Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes a bug introduced by the "mm counter operations through
macros" patch, which replaced a decrement operation in with an increment
macro in try_to_unmap_one().
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We we set the too early, they may still be in place and possibly get called
even though the array didn't get set up properly.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When a request crosses a boundary between devices, it needs to be split.
But where we should calculate the amount of the request before the boundary
to find the split-point, we care currently calculating the amount that is
*after* the boundary !!!
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Replace one memcpy() call with overlapping source and dest arguments with
one call to memmove(), to avoid data corruption.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Actually remove elf.h in the tree.  The previous patch, due to a quilt
bug/misuse, left it in the tree as a 0-length file, preventing the build to
see it as missing and to generate a symlink in its place.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Additional i8xx_tco device support.

Cc: David Hardeman <david@2gen.com>
Cc: <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Kernel 2.6 has an ide proc destroy error. Run #modprobe ide-core and
#rmmod ide-core, then kernel will dump stack information like below.

**********Log******************
Badness in remove_proc_entry at fs/proc/generic.c:693

Call Trace:
 [<a0000001000117e0>] show_stack+0x80/0xa0
                                sp=3De0000003e05dfbe0 =
bsp=3De0000003e05d0ea8
 [<a0000001000120b0>] dump_stack+0x30/0x60
                                sp=3De0000003e05dfdb0 =
bsp=3De0000003e05d0e90
 [<a000000100183090>] remove_proc_entry+0x530/0x540
                                sp=3De0000003e05dfdb0 =
bsp=3De0000003e05d0e20
 [<a000000221cbd280>] proc_ide_destroy+0x120/0x140 [ide_core]
                                sp=3De0000003e05dfdc0 =
bsp=3De0000003e05d0df0
 [<a000000221ca65f0>] cleanup_module+0x50/0xa0 [ide_core]
                                sp=3De0000003e05dfdc0 =
bsp=3De0000003e05d0dd0
 [<a0000001000a9e10>] sys_delete_module+0x390/0x580
                                sp=3De0000003e05dfdc0 =
bsp=3De0000003e05d0d50
 [<a00000010000af40>] ia64_ret_from_syscall+0x0/0x20
                                sp=3De0000003e05dfe30 =
bsp=3De0000003e05d0d50
 [<a000000000010640>] _stext+0xffffffff00010640/0x400
                                sp=3De0000003e05e0000 =
bsp=3De0000003e05d0d50
Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

VmallocTotal: 34359738367 kB
VmallocUsed:    266288 kB
VmallocChunk: 18014366299193295 kB
is unsettling - x86_64 and some other architectures keep a separate address
range for modules in vmalloc's vmlist, which /proc/meminfo should pass over.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

move serio port's id attributes into separate subdirectory:
       ..devices/serioX/id_type  -> ..devices/serioX/id/type
       ..devices/serioX/id_proto -> ..devices/serioX/id/proto
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

serport - avoid calling serio_interrupt or serio_write_wakeup on unregistered
port.  Also fix memory leak which could happen if serport was left unused by
moving serio allocation down to serport_ldisc_read.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ALPS needs to be reset for detection to work reliably when reconnecting.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Make the alps printk output look consistent.

Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

serio - do not attempt to immediately disconnect port if resume failed, let
kseriod take care of it.  Otherwise we may attempt to unregister associated
input devices which will generate hotplug events which are not handled well
during swsusp.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a tiny patch that fixes bttv-cards.c so that Leadtek WinFast VC100
XP video capture cards work.  I've been advised to post it here after
having already posted it to the v4l mailing list.
Acked-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ioctl_by_bdev may only be used INSIDE the kernel.  If the "arg" argument
refers to memory that is accessed by put_user/get_user in the ioctl
function, the memory needs to be in the kernel address space (that's the
set_fs(KERNEL_DS) doing in the ioctl_by_bdev).  This works on i386 because
even with set_fs(KERNEL_DS) the user space memory is still accessible with
put_user/get_user.  That is not true for s390.  In short the ioctl
implementation of the pktcdvd device driver is horribly broken.
Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[Patch] Fix raw device ioctl pass-through

Raw character devices are supposed to pass ioctls through to the block
devices they are bound to.  Unfortunately, they are using the wrong
function for this: ioctl_by_bdev(), instead of blkdev_ioctl().

ioctl_by_bdev() performs a set_fs(KERNEL_DS) before calling the ioctl,
redirecting the user-space buffer access to the kernel address space.
This is, needless to say, a bad thing.

This was noticed first on s390, where raw IO was non-functioning.  The
s390 driver config does not actually allow raw IO to be enabled, which
was the first part of the problem.  Secondly, the s390 kernel address
space is distinct from user, causing legal raw ioctls to fail.  I've
reproduced this on a kernel built with 4G:4G split on x86, which fails
in the same way (-EFAULT if the address does not exist kernel-side;
returns success without actually populating the user buffer if it does.)

The patch below fixes both the config and address-space problems.  It's
based closely on a patch by Jan Glauber <jang@de.ibm.com>, which has
been tested on s390 at IBM.  I've tested it on x86 4G:4G (split address
space) and x86_64 (common address space).

Kernel-address-space access has been assigned CAN-2005-1264.
Signed-off-by: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

As reported by Paul Starzetz <ihaquer@isec.pl>

Reference: CAN-2005-1263
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Mainline kernels don't have VECTORS_HIGH nor COPYPAGE_MINICACHE yet.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Version 2 of the 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 is not
supported by the prism54 project.  To stop confusion, the kernel
documentation should state so as 3com made a good job hiding the version.
Signed-off-by: Andrew Morton <akpm@osdl.org>

diff -puN drivers/net/wireless/Kconfig~wireless-3crwe154g72-kconfig-help-fix drivers/net/wireless/Kconfig

This patch fixes a typo in tulip driver in 2.6.12-rc3.

Fix IBM EMAC driver ioctl bug.

I found IBM EMAC driver bug.
So mii-tool command print wrong status.

  # mii-tool
  eth0: 10 Mbit, half duplex, no link
  eth1: 10 Mbit, half duplex, no link

I can get correct status on fixed kernel.

  # mii-tool
  eth0: negotiated 100baseTx-FD, link okZZ
  eth1: negotiated 100baseTx-FD, link ok

Hiroaki Fuse

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> for CELF

	NET_WIRELESS is only a subset of the stuff in drivers/net/wireless;
NET_RADIO is what covers all of them.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>

Patch from Ben Dooks

Fix the setting of hdiv when set to divide-by-2. Thanks to
Jeonghoon Yoon for pointing this out.
Change name of the NAND device to "s3c2440-nand" as it
is not similar enough to the "s3c2410-nand" device.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

S3C2440 UPLL is the same as the S3C2410 UPLL, it is only the
MPLL which has an extra multiplication factor of 2 in the
multiplier.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Add the register definitions for the s3c2440 NAND controller
to the s3c2410 NAND register definitions

Signed-off-by: Ben Dooks
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Not all ARMv6 processors implement the TLS register.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Sascha Hauer

This patch adds the defines for the i.MX PWM controller

Signed-off-by: Steven Scholz
Signed-off-by: Sascha Hauer
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add cache flushing support for aliased V6 caches to
flush_dcache_page.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Remove needless page table walking for v6 page operations.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>