- 24 Aug, 2006 3 commits
-
-
Don Fry authored
A change I made for 2.6.17 and another for 2.6.18 do not work on older pcnet32 chips which I do not have access to. If the chip is a 79C970 or 79C965, do not try and suspend or check the link status. I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976, and 79C978. Signed-off-by:
Don Fry <brazilnut@us.ibm.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Joerg Ahrens authored
I am using a Xircom CEM33 pcmcia NIC which has occasional hardware problems. If the netdev watchdog detects a transmit timeout, do_reset is called which msleeps - this is illegal in atomic context. This patch schedules the timeout handling as a workqueue item. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Eric Sesterhenn authored
while playing with gcc 4.1 -Wextra warnings, I came across this one: drivers/net/3c515.c:1027: warning: comparison of unsigned expression >= 0 is always true Since i is unsigned the >= 0 check in the for loop is always true, so we might spin there forever unless the if condition triggers. Since i is only used in this loop, this patch changes it to an integer. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
-
- 19 Aug, 2006 37 commits
-
-
Krzysztof Halasa authored
Hi, One of my recent changes broke C101 carrier handling, this patch fixes it. Also fixes an old TX underrun checking bug. 2.6.18 material. Please apply. Thanks. Signed-off-by:
Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
-
Vitaly Bordug authored
This contains board-specific portion to respect driver changes (for 8272ads , 885ads and 866ads). Altered platform_data structures as well as initial setup routines relevant to fs_enet. Changes to the mpc8560ads ppc/ code are also introduced, but mainly as reference, since the entire board support is going to appear in arch/powerpc. Signed-off-by:
Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Vitaly Bordug authored
This patch should update the fs_enet infrastructure to utilize Phy Abstraction Layer subsystem. Along with the above, there are apparent bugfixes, overhaul and improvements. Signed-off-by:
-
Vitaly Bordug authored
This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Valerie Henson <val_henson@linux.intel.com> Signed-off-by:
-
Heiko Carstens authored
qeth: bhs must be disabled when accessing neighbour tables. ================================= [ INFO: inconsistent lock state ] Signed-off-by: -
Edgar E. Iglesias authored
Signed-off-by:
Edgar E. Iglesias <edgar.iglesias@axis.com> Cc: Stephen Hemminger <shemminger@osdl.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Jim Lewis authored
Add ethtool -g (show ring sizes) support to the Spidernet network driver. Signed-off-by:
James K Lewis <jklewis@us.ibm.com> Signed-off-by:
-
David Brownell authored
Unclear how these bugs arrived, presumably from incorrect cleanup of the 16-bit-only paths, but smc91x wouldn't build for OMAP. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Nicolas Pitre <nico@cam.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Roger Luethi authored
It looks like broken BIOSes controlling Rhine chips will remain in use in significant numbers; such systems fail to come up via PXE after they have been put into D3 (power-saving) mode. This patch adds a module option for disabling the call that puts the chip to sleep. Signed-off-by:
Roger Luethi <rl@hellgate.ch> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Joerg Bashir <brak@archive.org> Cc: Tim Phipps <tim@phipps-hutton.freeserve.co.uk> Signed-off-by:
-
Russell King authored
When booting using root-nfs, I'm seeing (independently) two lockdep dumps in the smc91x driver. The patch below fixes both. Both dumps look like real locking issues. Nico - please review and ack if you think the patch is correct. Dump 1: Sending DHCP requests . ================================= [ INFO: inconsistent lock state ] Signed-off-by: -
Stephen Hemminger authored
The poll_enable should be in init_registers before enabling interrupts, not in tx_timeout. Thanks for spotting it Roger. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Cc: Roger Luethi <rl@hellgate.ch> Signed-off-by:
-
Roger Luethi authored
Add NAPI support to the via-rhine driver so that it can handle higher speeds and doesn't get overloaded by interrupts as easily. Signed-off-by:
-
Peter Korsgaard authored
The smc911x driver forgets to release the spinlock on spurious interrupts. This little patch fixes it. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Kevin Hao authored
Add netconsole support to dm9000 driver. Cc: Jeff Garzik <jeff@garzik.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Andrew Morton authored
sparc32: drivers/net/s2io.c:2636: warning: implicit declaration of function 'disable_irq' drivers/net/s2io.c:2656: warning: implicit declaration of function 'enable_irq' Cc: Ananda Raju <Ananda.Raju@neterion.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Deepak Saxena authored
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new generic IRQ layer will complain thusly: No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>) Signed-off-by:
Deepak Saxena <dsaxena@plexity.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Nicolas Pitre <nico@cam.org> Signed-off-by:
-
Li Yang authored
QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by:
Shlomi Gridish <gridish@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Adrian Bunk authored
- make needlessly global functions static - #if 0 the following unused global functions: - e1000_hw.c: e1000_mc_addr_list_update() - e1000_hw.c: e1000_read_reg_io() - e1000_hw.c: e1000_enable_pciex_master() - e1000_hw.c: e1000_ife_disable_dynamic_power_down() - e1000_hw.c: e1000_ife_enable_dynamic_power_down() - e1000_hw.c: e1000_write_ich8_word() - e1000_hw.c: e1000_duplex_reversal() - e1000_main.c: e1000_io_read() Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
-
Andrew Morton authored
drivers/net/sundance.c:110: error: version causes a section type conflict I don't understand this error. It's referred to from both __init and __devinit code. With CONFIG_HOTPLUG=n, version[] is placed in .init.data and is referred to from .init.text. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
With CONFIG_HOTPLUG=n it won't compile: distcc[25607] ERROR: compile drivers/net/fealnx.c on g5/64 failed version[] is referred to from both __init code and from __devinit code, so move it out of __init altogether. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
With CONFIG_HOTPLUG=n it won't compile: drivers/net/tulip/winbond-840.c:141: error: version causes a section type conflict (For some reason it gets the same error if marked __initdata. Give up.) Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/seeq8005.o - Section mismatch: reference to .init.text:seeq8005_probe from .text between 'init_module' (at offset 0x106) and 'seeq8005_open' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/ni65.o - Section mismatch: reference to .init.text:ni65_probe from .text between 'init_module' (at offset 0x54a) and 'ni65_stop_start' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xfd) and 'wd_open' WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x14b) and 'wd_open' WARNING: drivers/net/wd.o - Section mismatch: reference to .init.data:wd_portlist from .text between 'init_module' (at offset 0x17f) and 'wd_open' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/tokenring/smctr.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x2ba0) and 'smctr_reset_adapter' WARNING: drivers/net/tokenring/smctr.o - Section mismatch: reference to .init.text:smctr_probe from .text between 'init_module' (at offset 0x2bf4) and 'smctr_reset_adapter' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x6e6) and 'ibmtr_probe_card' WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x74a) and 'ibmtr_probe_card' WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x7fd) and 'ibmtr_probe_card' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/ni52.o - Section mismatch: reference to .init.text:ni52_probe from .text between 'init_module' (at offset 0x997) and 'ni52_close' WARNING: drivers/net/ni65.o - Section mismatch: reference to .init.text:ni65_probe from .text between 'init_module' (at offset 0x54a) and 'ni65_stop_start' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/lne390.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x100) and 'lne390_close' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/lance.o - Section mismatch: reference to .init.data:lance_portlist from .text between 'init_module' (at offset 0x8d3) and 'lance_purge_ring' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x6d2) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x6ef) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x702) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x70e) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x71d) and 'eth16i_multicast' WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x729) and 'eth16i_multicast' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/es3210.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xdf) and 'es_close' WARNING: drivers/net/es3210.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x100) and 'es_close' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/eexpress.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x6c3) and 'eexp_hw_lasttxstat' WARNING: drivers/net/eexpress.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x74f) and 'eexp_hw_lasttxstat' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x284) and 'eepro_ethtool_get_drvinfo' WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x2a7) and 'eepro_ethtool_get_drvinfo' WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.data:eepro_portlist from .text between 'init_module' (at offset 0x2b3) and 'eepro_ethtool_get_drvinfo' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/e2100.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xd9) and 'e21_reset_8390' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/at1700.o - Section mismatch: reference to .init.text:at1700_probe from .text between 'init_module' (at offset 0x75) and 'net_get_stats' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Andrew Morton authored
WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.data:version from .text between 'init_module' (at offset 0x13d8) and 'net_get_stats' WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x1634) and 'net_get_stats' WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x1a1f) and 'net_get_stats' Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
