- 03 Oct, 2006 40 commits
-
-
NeilBrown authored
raid1d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Coywolf Qi Hunt authored
Signed-off-by:
Coywolf Qi Hunt <qiyong@freeforge.net> Signed-off-by:
-
Paul Clements authored
Add a new sysfs interface that allows the bitmap of an array to be dirtied. The interface is write-only, and is used as follows: echo "1000" > /sys/block/md2/md/bitmap (dirty the bit for chunk 1000 [offset 0] in the in-memory and on-disk bitmaps of array md2) echo "1000-2000" > /sys/block/md1/md/bitmap (dirty the bits for chunks 1000-2000 in md1's bitmap) This is useful, for example, in cluster environments where you may need to combine two disjoint bitmaps into one (following a server failure, after a secondary server has taken over the array). By combining the bitmaps on the two servers, a full resync can be avoided (This was discussed on the list back on March 18, 2005, "[PATCH 1/2] md bitmap bug fixes" thread). Signed-off-by:
-
NeilBrown authored
It isn't needed as mddev->degraded contains equivalent info. Signed-off-by:
-
NeilBrown authored
They are not needed. conf->failed_disks is the same as mddev->degraded and conf->working_disks is conf->raid_disks - mddev->degraded. Signed-off-by:
-
NeilBrown authored
Instead of magic numbers (0,1,2,3) in sb_dirty, we have some flags instead: MD_CHANGE_DEVS Some device state has changed requiring superblock update on all devices. MD_CHANGE_CLEAN The array has transitions from 'clean' to 'dirty' or back, requiring a superblock update on active devices, but possibly not on spares MD_CHANGE_PENDING A superblock update is underway. We wait for an update to complete by waiting for all flags to be clear. A flag can be set at any time, even during an update, without risk that the change will be lost. Stop exporting md_update_sb - isn't needed. Signed-off-by:
-
NeilBrown authored
raid10d has toooo many nested block, so take the fix_read_error functionality out into a separate function. Signed-off-by:
-
NeilBrown authored
Signed-off-by:
-
Adrian Bunk authored
This patch contains the scheduled removal of the START_ARRAY ioctl for md. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Bryn Reeves authored
This patch adds support for a per-target dm_flush_fn method. This is needed to allow dm-loop to invalidate page cache mappings in response to BLKFLSBUF ioctl commands. Signed-off-by:
Bryn Reeves <breeves@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Bryn Reeves authored
Separate the setting of device I/O limits from dm_get_device(). dm-loop will use this. Signed-off-by:
-
Stefan Bader authored
I found a problem within device-mapper that occurs in low-mem situations. It was found using a mirror target but I think in theory it would hit any setup that stacks device-mapper devices (like LVM on top of multipath). Since device-mapper core uses the common fs_bioset in clone_bio(), and a private, but still global, bio_set in split_bvec() it is possible that the filesystem and the first level target successfully get bios but the lower level target doesn't because there is no more memory and the pool was drained by upper layers. So the remapping will be stuck forever. To solve this device-mapper core needs to use a private bio_set for each device. Signed-off-by:
Stefan Bader <Stefan.Bader@de.ibm.com> Signed-off-by:
-
Milan Broz authored
In the low memory situation dm-crypt needs to use a private mempool of bios to avoid blocking. Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Milan Broz authored
This patch is designed to help dm-crypt comply with the new constraints imposed by the following patch in -mm: md-dm-reduce-stack-usage-with-stacked-block-devices.patch Under low memory the existing implementation relies upon waiting for I/O submitted recursively to generic_make_request() completing before the original generic_make_request() call can return. This patch moves the I/O submission to a workqueue so the original generic_make_request() can return immediately. Signed-off-by:
-
Milan Broz authored
Restructure the dm-crypt write processing in preparation for workqueue changes in the next patches. Signed-off-by:
-
Milan Broz authored
Restructure part of the dm-crypt code in preparation for workqueue changes. Use 'base_bio' or 'clone' variable names consistently throughout. No functional changes are included in this patch. Signed-off-by:
-
Milan Broz authored
Add the facility to wipe the encryption key from memory (for example while a laptop is suspended) and reinstate it later (when the laptop gets resumed). Signed-off-by:
-
Milan Broz authored
This patch adds a target preresume hook. It is called before the targets are resumed and if it returns an error the resume gets cancelled. The crypt target will use this to indicate that it is unable to process I/O because no encryption key has been supplied. Signed-off-by:
-
Bryn Reeves authored
Add CONFIG_DM_DEBUG and DMDEBUG() macro. Signed-off-by:
-
Hannes Reinecke authored
Device-mapper devices are not accessible until a 'resume' ioctl has been issued. For userspace to find out when this happens we need to generate an uevent for udev to take appropriate action. As discussed at OLS we should send 'change' events for 'resume'. We can think of no useful purpose served by also having 'suspend' events. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Micha³ Miros³aw authored
Use kzalloc() instead of kmalloc() + memset(). Signed-off-by:
Micha³ Miros³aw <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Micha³ Miros³aw authored
After initialising m->ti, there's no need to pass it in subsequent calls to static functions used for parsing parameters. Signed-off-by:
-
Jonathan Brassow authored
Remove trailing space from 'dmsetup table' output. Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
-
Alasdair G Kergon authored
If a snapshot became invalid while there are outstanding pending_exceptions, when pending_complete() processes each one it forgets to remove the corresponding exception from its exception table before freeing it. Fix this by moving the 'out:' label up one statement so that remove_exception() is always called. Then __invalidate_exception() no longer needs to call it and its 'pe' argument become superfluous. Signed-off-by:
-
Alasdair G Kergon authored
Rename sibling_count to ref_count and introduce get and put functions. Signed-off-by:
-
Alasdair G Kergon authored
Add a workqueue so that I/O can be queued up to be flushed from a separate thread (e.g. if local interrupts are disabled). A new per-snapshot spinlock pe_lock is introduced to protect queued_bios. Signed-off-by:
Mark McLoughlin <markmc@redhat.com> Signed-off-by:
-
Alasdair G Kergon authored
This patch rearranges the pending_complete() code so that the functional changes in subsequent patches are clearer. By consolidating the error and the non-error paths, we can move error_snapshot_bios() and __flush_bios() in line. Signed-off-by:
-
Alasdair G Kergon authored
This patch rearranges the snapshot_map code so that the functional changes in subsequent patches are clearer. The only functional change is to replace the existing read lock with a write lock which the next patch needs. Signed-off-by:
-
Mark McLoughlin authored
When suspending a device-mapper device, dm_suspend() sleeps until all necessary I/O is completed. This state is triggered by a callback from persistent_commit(). But some I/O can still be issued *after* the callback (to prepare the next metadata area for use if the current one is full). This patch delays the callback until after that I/O is complete. Signed-off-by:
-
Mark McLoughlin authored
read_exception() and write_exception() only return an error if supplied with an out-of-range index. If this ever happens it's the result of a bug in the calling code so we handle this with an assertion and remove the error handling in the callers. Signed-off-by:
-
Mark McLoughlin authored
Fix the error handling when store.read_metadata is called: the error should be returned immediately. Signed-off-by:
-
Mark McLoughlin authored
The chunk size of snapshots cannot be changed so it is redundant to require it as a parameter when activating an existing snapshot. Allow a value of zero in this case and ignore it. For a new snapshot, use a default value if zero is specified. Signed-off-by:
-
Milan Broz authored
Fix ENOMEM error sign. Signed-off-by:
-
Ishai Rabinovitz authored
While reading the code I found a bug in the error path in alloc_dev in dm.c When blk_alloc_queue fails there is no call to free_minor. This patch fixes the problem. Signed-off-by:
Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by:
-
Milan Broz authored
The new ioctl code passes the wrong file pointer to the underlying device. No file pointer is available so make a temporary fake one. ioctl_by_bdev() does set_fs(KERNEL_DS) so it's for ioctls originating within the kernel and unsuitable here. We are processing ioctls that originated in userspace and mapping them to different devices. Fixing the existing callers that pass a NULL file struct and consolidating the fake_file users are separate matters to solve in later patches. Signed-off-by:
-
Alasdair G Kergon authored
Export blkdev_driver_ioctl for device-mapper. If we get as far as the device-mapper ioctl handler, we know the ioctl is not a standard block layer BLK* one, so we don't need to check for them a second time and can call blkdev_driver_ioctl() directly. Signed-off-by:
-
Milan Broz authored
When an ioctl is performed on a multipath device simply pass it on to the underlying block device through current_path. If current path is not yet selected, select it. Signed-off-by:
-
Milan Broz authored
When an ioctl is performed on a device with a linear target, simply pass it on to the underlying block device. Note that the ioctl will pass through the filtering in blkdev_ioctl() twice. Signed-off-by:
-
Milan Broz authored
Extend the core device-mapper infrastructure to accept arbitrary ioctls on a mapped device provided that it has exactly one target and it is capable of supporting ioctls. [We can't use unlocked_ioctl because we need 'inode': 'file' might be NULL. Is it worth changing this?] Signed-off-by:
-
Paul Mackerras authored
xmon writes garbage on the screen because the nvidia console driver has changed the line pitch from what the firmware set it to. Fix it by making the nvidia driver inform the btext engine (which xmon uses if the screen is its output device) about changes to display resolution. Signed-off-by:
Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
