- 09 Feb, 2007 3 commits
-
-
Rojhalat Ibrahim authored
We get the following compiler error: CC arch/ppc/kernel/ppc_ksyms.o arch/ppc/kernel/ppc_ksyms.c:275: error: '__mtdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:275: warning: type defaults to 'int' in declaration of '__mtdcr' arch/ppc/kernel/ppc_ksyms.c:276: error: '__mfdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:276: warning: type defaults to 'int' in declaration of '__mfdcr' make[1]: *** [arch/ppc/kernel/ppc_ksyms.o] Error 1 This is due to the EXPORT_SYMBOL for __mtdcr/__mfdcr not having the proper CONFIG protection Signed-off-by:
Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kumar Gala authored
Marked a number of functions in 85xx board code as static. Also, some minor whitespace cleanup Signed-off-by: -
Kumar Gala authored
When building an 85xx kernel we get: CC arch/powerpc/mm/pgtable_32.o arch/powerpc/mm/pgtable_32.c: In function 'io_block_mapping': arch/powerpc/mm/pgtable_32.c:330: error: expected identifier before '(' token arch/powerpc/mm/pgtable_32.c:330: error: expected statement before ')' token The is_power_of_2(x) fixup patch left an extra ')' on the is_power_of_4 macro. There is a similiar issue on the arch/ppc side. Signed-off-by:
-
- 08 Feb, 2007 13 commits
-
-
Mathieu Desnoyers authored
The following macro : include/asm-powerpc/vga.h:#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) is used by drivers/video/console/vgacon.c which can be compiled as a module (drivers/video/vga16fb.ko). Therefore, vgacon_remap_base should be exported. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Johannes Berg authored
arch/powerpc/mm/mem.c states that page_is_ram is called by the code that implements /dev/mem, which isn't true. Remove the comment. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Johannes Berg authored
When the windfarm thread gets a suspend signal it will die instead of freezing. This fixes it. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Johannes Berg authored
kernel/irq.c contains a comment that speaks of -1 and -2 as interrupt numbers, but this is actually dependent on configuration options now. Replace by NO_IRQ and NO_IRQ_ENABLED. Signed-off-by:
-
Stefan Roese authored
Fix two problems in the book-e watchdog driver. a) The 4xx default period was defined wrong b) Clear status before enabling the watchdog exception Signed-off-by:
Stefan Roese <sr@denx.de> Signed-off-by:
-
Ahmed S. Darwish authored
Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by:
Ahmed S. Darwish <darwish.07@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Kumar Gala <galak@gate.crashing.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ahmed S. Darwish authored
Use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by:
-
Stephen Rothwell authored
In preparation for marking file_operations as const. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Arjan van de Ven <arjan@infradead.org> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Robert P. J. Day authored
Use the appropriate logging macro for the priority level for that printk call. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Mariusz Kozlowski authored
Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Grant Likely authored
Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Acked-by:
Sylvain Munaut <tnt@246tNt.com> Signed-off-by:
-
Paul Mackerras authored
Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.21
-
Paul Mackerras authored
The previous patch changing pSeries to use H_BULK_REMOVE broke the JS20 blade, where the firmware doesn't support H_BULK_REMOVE. This adds a firmware check so that on machines that don't have H_BULK_REMOVE, we just use the H_REMOVE call as before. Signed-off-by:
-
- 07 Feb, 2007 24 commits
-
-
Kumar Gala authored
When we do full FP emulation its possible that we need to post a SIGFPE based on the results of the emulation. The previous code ignored this case completely. Additionally, the Soft_emulate_8xx case had two issues. One, we should never generate a SIGFPE since the code only does data movement. Second, we were interpreting the return codes incorrectly, it returns 0 on success, 1 on illop and -EFAULT on a data access error. Signed-off-by: -
Kumar Gala authored
Anytime we are emulating an instruction we are going to be doing some form of get_user() to get the instruction image to decode. Since get_user() might sleep we need to ensure we have interrupts enabled or we might see something like: Debug: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:697 in_atomic():0, irqs_disabled():1 Call Trace: [D6023EB0] [C0007F84] show_stack+0x58/0x174 (unreliable) [D6023EE0] [C0022C34] __might_sleep+0xbc/0xd0 [D6023EF0] [C000D158] program_check_exception+0x1d8/0x4fc [D6023F40] [C000E744] ret_from_except_full+0x0/0x4c --- Exception: 700 at 0x102a7100 LR = 0xdb9ef04 However, we want to ensure that interrupts are disabled when handling a trap exception that might be used for a kernel breakpoint. This is why ProgramCheck is marked as EXC_XFER_STD instead of EXC_XFER_EE. Signed-off-by: -
Kumar Gala authored
Added kprobes to ppc32 platforms that have use single_step_exception. This excludes 4xx and anything Book-E since their debug mechanisms for single stepping are completely different. Signed-off-by: -
Paul Mackerras authored
-
Paul Mackerras authored
H_BULK_REMOVE lets us remove 4 entries from the MMU hash table with one hypervisor call. This uses it in pSeries_lpar_hpte_invalidate so we can tear down mappings with fewer hypervisor calls. Signed-off-by: -
Paul Mackerras authored
Some instruction tracing tools use the RI (recoverable interrupt) bit in the MSR to indicate when it's safe to single-step. Currently we clear RI after restoring r13 when returning to userspace. However, if we single-step past the point where r13 is restored, we'll corrupt r13 in the exception entry code and not restore it. This moves the clearing of RI to just before r13 is restored so this doesn't happen. Signed-off-by: -
Livio Soares authored
To the issue: some point during 2.6.20 development, Paul Mackerras introduced the "lazy IRQ disabling" patch (very cool work, BTW). In that patch, the performance monitor unit exception was marked as "maskable", in the sense that if interrupts were soft-disabled, that exception could be ignored. This broke my PowerPC profiling code. The symptom that I see is that a varying number of interrupts (from 0 to $n$, typically closer to 0) get delivered, when, in reality, it should always be very close to $n$. The issue stems from the way masking is being done. Masking in this fashion seems to work well with the decrementer and external interrupts, because they are raised again until "really" handled. For the PMU, however, this does not apply (at least on my Xserver machine with a 970FX processor). If the PMU exception is not handled, it will _not_ be re-raised (at least on my machine). The documentation states that the PMXE bit in MMCR0 is set to 0 when the PMU exception is raised. However, software must re-set the bit to re-enable PMU exceptions. If the exception is ignored (as currently) not only is that interrupt lost, but because software does not re-set PMXE, the PMU registers are "frozen" forever. [This patch means that performance monitor exceptions are taken and handled even if irqs are off, as long as some other interrupt hasn't come along and caused interrupts to be hard-disabled. In this sense the PMU exception becomes like an NMI. The oprofile code for most powerpc processors does nothing that is unsafe in an NMI context, but the Cell oprofile code does a spin_lock_irqsave. However, that turns out to be OK because Cell doesn't actually use the performance monitor exception; performance monitor interrupts come in as a regular interrupt on Cell, so will be disabled when irqs are off. -- paulus.] Signed-off-by: -
David Gibson authored
The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
-
Nathan Lynch authored
Some systems supported by the maple platform (e.g. JS2x blades running SLOF) are able to use the mmio_nvram backend for reading and writing nvram. This is an improvement over the current situation -- no nvram access from userspace at all. Select MMIO_NVRAM for the maple platform. Initialize the mmio_nvram backend from maple setup code. Signed-off-by:
Nathan Lynch <ntl@pobox.com> Signed-off-by:
-
Olof Johansson authored
Base pasemi defconfig. Nothing special, just the native drivers plus common PCI-express/PCI cards. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Olof Johansson authored
I/O TLB support for PA6T-1682M. Signed-off-by:
-
Olof Johansson authored
The DMA controller on PWRficient is somewhat special -- has a PCI header so it looks like it's on the root PCI (-Express) root bus, but it uses more than the default number of interrupts (and they are hardwired). We need to wire up all interrupts for the DMA controller. The generic IRQ code will only map the primary interrupt from the PCI header (128), so add 129->211 by hand. Signed-off-by:
-
Olof Johansson authored
Timebase update is simple on PA6T, since global updates can be done from one core by writing to an SPR. Signed-off-by:
-
Olof Johansson authored
Implement reset on platforms/pasemi. Default is just to reset the cpu using the SDC registers. Signed-off-by:
-
Olof Johansson authored
Powersave support on PA6T. Right now it only uses 'doze' mode, and will default to no savings (spin). Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Olof Johansson authored
Print out decoded machine check information on PA6T. Signed-off-by:
-
Olof Johansson authored
Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by:
-
Pavel Roskin authored
G3 Blue & White is misconfigured by default so that CardBus controllers in PCI slots don't work. The PCI bridge is programmed to only allow access to bus 1 but not higher busses. The patch forces the PCI busses to be reassigned if a Grackle controller is found and the machine identifies itself as "PowerMac1,1" Signed-off-by:
Pavel Roskin <proski@gnu.org> Acked-by:
-
Ishizaki Kou authored
This patch creates defconfig file for Celleb platform. Signed-off-by:
Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
-
Ishizaki Kou authored
This patch adds base support for Celleb platform. Signed-off-by:
-
Ishizaki Kou authored
SPU support routines for Celleb platform. Signed-off-by:
-
Ishizaki Kou authored
Spu management ops in arch/platforms/cell/spu_priv1_mmio.h can be used commonly in of based platform. This patch separates spu management ops from native cell code and uses on celleb platform. Signed-off-by:
-
Ishizaki Kou authored
This patch adds hypervisor console driver for Celleb platform. Signed-off-by:
-
Ishizaki Kou authored
This patch adds udbg support for Celleb platform. Signed-off-by:
-
