- 24 Jul, 2006 1 commit
-
-
Jeff Garzik authored
This is just the for-RC fix. A 'TODO' command is added, describing what's needed for the more-complete fix.
-
- 19 Jul, 2006 3 commits
-
-
Tejun Heo authored
Update ata_eh_about_to_do() and ata_eh_done() to improve EH action and EHI flag handling. * There are two types of EHI flags - one which expires on successful EH and the other which expires on a successful reset. Make this distinction clear. * Unlike other EH actions, reset actions are represented by two EH action masks and a EHI modifier. Implement correct about_to_do/done semantics for resets. That is, prior to reset, related EH info is sucked in from ehi and cleared, and after reset is complete, related EH info in ehc is cleared. These changes improve consistency and remove unnecessary EH actions caused by stale EH action masks and EHI flags. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
* (ata_dev_absent() || ata_dev_ready()) test doesn't indicate SUSPENDED state properly. Fix it. * Link resuming resets shouldn't be skipped. Don't skip recovery on EHI_RESUME_LINK. This doesn't matter for host ports as EHI_RESUME always coincides with EHI_HOTPLUGGED which makes attached disabled devices vacant. However, PMP reset causes non-hotplug link-resuming resets which shouldn't be skipped. Signed-off-by:
-
Tejun Heo authored
Commit 0662c58b updated ata_eh_autopsy() to OR determined action to ehc->i.action to preserve action mask set directly into ehc->i.action by nested functions. This broke action mask clearing on SENSE_VALID case causing revalidation and EH complete message on successful ATAPI CC. This patch removes two local variables - action and failed_dev - which cache ehc->i.action and ehc->i.dev respectively, and make the function directly modify ehc->i.* fields to remove aliasing issues. Signed-off-by:
-
- 16 Jul, 2006 5 commits
-
-
Jeff Garzik authored
Signed-off-by: -
Jeff Garzik authored
* delete unused PIIX_FLAG_COMBINED* * port_enable should be u16 rather than u32 Signed-off-by: -
Jeff Garzik authored
Take into account the fact that ICH8 changed the register layout of the MAP and PCS register bits. Signed-off-by: -
Jeff Garzik authored
Prior to this patch, the driver would do this for each port: read 8-bit PCS write 8-bit PCS read 8-bit PCS write 8-bit PCS In the field, flaky behavior has been observed related to this register. In particular, these overzealous register writes can cause misdetection problems. Update to do the following once (not once per port) at boot: read 16-bit PCS if needs changing, write 16-bit PCS And thereafter, we only perform a 'read 16-bit PCS' per port. This should eliminate all PCS writes in many cases, and be more friendly in the cases where we do need to enable ports. Signed-off-by: -
Tejun Heo authored
Add host_set private structure piix_host_priv. Currently the only field is ->map which used to be stored directly at host_set->private_data. This change allows more host_set private fields to be added. Signed-off-by:
-
- 15 Jul, 2006 31 commits
-
-
Linus Torvalds authored
Finishing up for the kernel summit. Ottawa, here I come. Signed-off-by:Linus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: commit_mutex cleanups
-
Jeff Dike authored
Some -mm-only material leaked into a patch destined for mainline, and I didn't notice. This was the replacement of system_utsname with utsname() that's required by the uts namespace patch. This patch reverts those changes (which are correct in -mm) so that mainline UML builds again. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Linus Torvalds authored
This just turns off chmod() on the /proc/<pid>/ files, since there is no good reason to allow it, and had we disallowed it originally, the nasty /proc race exploit wouldn't have been possible. The other patches already fixed the problem chmod() could cause, so this is really just some final mop-up.. This particular version is based off a patch by Eugene and Marcel which had much better naming than my original equivalent one. Signed-off-by:
Eugene Teo <eteo@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Linus Torvalds authored
Not that we really need this any more, but at the same time there's no reason not to do this. Signed-off-by: -
Dave Jones authored
net/sched/sch_htb.c: In function 'htb_change_class': net/sched/sch_htb.c:1605: error: expected ';' before 'do_gettimeofday' Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Fix alignment after aes_ctx rearrange
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64] Fix PSYCHO PCI controler init. [SPARC64] psycho: Fix pbm->name handling in pbm_register_toplevel_resources() [SERIAL] sunsab: Fix significant typo in sab_probe() [SERIAL] sunsu: Report keyboard and mouse ports in kernel log. [SPARC64]: Make sure IRQs are disabled properly during early boot.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [VLAN]: __vlan_hwaccel_rx can use the faster ether_compare_addr [PKT_SCHED] HTB: initialize upper bound properly [IPV4]: Clear skb cb on IP input [NET]: Update frag_list in pskb_trim
-
Steven Rostedt authored
set_wmb should not be used in the kernel because it just confuses the code more and has no benefit. Since it is not currently used in the kernel this patch removes it so that new code does not include it. All archs define set_wmb(var, value) to do { var = value; wmb(); } while(0) except ia64 and sparc which use a mb() instead. But this is still moot since it is not used anyway. Hasn't been tested on any archs but x86 and x86_64 (and only compiled tested) Signed-off-by:Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt authored
This patch removes the reference to set_wmb from memory-barriers.txt since it shouldn't be used. Signed-off-by:
-
Shailabh Nagar authored
In send_cpu_listeners(), which is called on the exit path, a down_write() was protecting operations like skb_clone() and genlmsg_unicast() that do GFP_KERNEL allocations. If the oom-killer decides to kill tasks to satisfy the allocations,the exit of those tasks could block on the same semphore. The down_write() was only needed to allow removal of invalid listeners from the listener list. The patch converts the down_write to a down_read and defers the removal to a separate critical region. This ensures that even if the oom-killer is called, no other task's exit is blocked as it can still acquire another down_read. Thanks to Andrew Morton & Herbert Xu for pointing out the oom related pitfalls, and to Chandra Seetharaman for suggesting this fix instead of using something more complex like RCU. Signed-off-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
Shailabh Nagar <nagar@watson.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Shailabh Nagar authored
On systems with a large number of cpus, with even a modest rate of tasks exiting per cpu, the volume of taskstats data sent on thread exit can overflow a userspace listener's buffers. One approach to avoiding overflow is to allow listeners to get data for a limited and specific set of cpus. By scaling the number of listeners and/or the cpus they monitor, userspace can handle the statistical data overload more gracefully. In this patch, each listener registers to listen to a specific set of cpus by specifying a cpumask. The interest is recorded per-cpu. When a task exits on a cpu, its taskstats data is unicast to each listener interested in that cpu. Thanks to Andrew Morton for pointing out the various scalability and general concerns of previous attempts and for suggesting this design. [akpm@osdl.org: build fix] Signed-off-by:
Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Shailabh Nagar authored
Don't send taskstats (per-pid or per-tgid) on thread exit when no one is listening for such data. Currently the taskstats interface allocates a structure, fills it in and calls netlink to send out per-pid and per-tgid stats regardless of whether a userspace listener for the data exists (netlink layer would check for that and avoid the multicast). As a result of this patch, the check for the no-listener case is performed early, avoiding the redundant allocation and filling up of the taskstats structures. Signed-off-by:
-
Shailabh Nagar authored
Change documentation and example program to reflect the flow control issues being addressed by the cpumask changes. Signed-off-by:
-
Shailabh Nagar authored
Send per-tgid data only once during exit of a thread group instead of once with each member thread exit. Currently, when a thread exits, besides its per-tid data, the per-tgid data of its thread group is also sent out, if its thread group is non-empty. The per-tgid data sent consists of the sum of per-tid stats for all *remaining* threads of the thread group. This patch modifies this sending in two ways: - the per-tgid data is sent only when the last thread of a thread group exits. This cuts down heavily on the overhead of sending/receiving per-tgid data, especially when other exploiters of the taskstats interface aren't interested in per-tgid stats - the semantics of the per-tgid data sent are changed. Instead of being the sum of per-tid data for remaining threads, the value now sent is the true total accumalated statistics for all threads that are/were part of the thread group. The patch also addresses a minor issue where failure of one accounting subsystem to fill in the taskstats structure was causing the send of taskstats to not be sent at all. The patch has been tested for stability and run cerberus for over 4 hours on an SMP. [akpm@osdl.org: bugfixes] Signed-off-by:
-
Shailabh Nagar authored
Export I/O delays seen by a task through /proc/<tgid>/stats for use in top etc. Note that delays for I/O done for swapping in pages (swapin I/O) is clubbed together with all other I/O here (this is not the case in the netlink interface where the swapin I/O is kept distinct) [akpm@osdl.org: printk warning fix] Signed-off-by:
-
Shailabh Nagar authored
Some documentation for delay accounting. Signed-off-by:
-
Shailabh Nagar authored
Usage of taskstats interface by delay accounting. Signed-off-by:
Shailabh Nagar <nagar@us.ibm.com> Signed-off-by:
-
Shailabh Nagar authored
Create a "taskstats" interface based on generic netlink (NETLINK_GENERIC family), for getting statistics of tasks and thread groups during their lifetime and when they exit. The interface is intended for use by multiple accounting packages though it is being created in the context of delay accounting. This patch creates the interface without populating the fields of the data that is sent to the user in response to a command or upon the exit of a task. Each accounting package interested in using taskstats has to provide an additional patch to add its stats to the common structure. [akpm@osdl.org: cleanups, Kconfig fix] Signed-off-by:
-
Balbir Singh authored
Two utilities for simplifying usage of NETLINK_GENERIC interface. Signed-off-by:
-
Chandra Seetharaman authored
Make the task-related schedstats functions callable by delay accounting even if schedstats collection isn't turned on. This removes the dependency of delay accounting on schedstats. Signed-off-by:
-
Shailabh Nagar authored
Unlike earlier iterations of the delay accounting patches, now delays are only collected for the actual I/O waits rather than try and cover the delays seen in I/O submission paths. Account separately for block I/O delays incurred as a result of swapin page faults whose frequency can be affected by the task/process' rss limit. Hence swapin delays can act as feedback for rss limit changes independent of I/O priority changes. Signed-off-by:
-
Shailabh Nagar authored
Initialization code related to collection of per-task "delay" statistics which measure how long it had to wait for cpu, sync block io, swapping etc. The collection of statistics and the interface are in other patches. This patch sets up the data structures and allows the statistics collection to be disabled through a kernel boot parameter. Signed-off-by:
-
Shailabh Nagar authored
Add another list utility function to check for last element in a list. Signed-off-by:
-
Mike Rapoport authored
Add frame buffer driver for the 2700G LCD controller present on CompuLab CM-X270 computer module. [adaplas] - Add more informative help text to Kconfig - Make DEBUG a Kconfig option as FB_MBX_DEBUG - Remove #include mbxdebug.c, this is frowned upon - Remove redundant casts - Arrange #include's alphabetically - Trivial whitespace Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Eric Paris authored
After some discussion on the actual meaning of the filesystem class security check in try context mount it was determined that the checks for the context= mount options were not correct if fscontext mount option had already been used. When labeling the superblock we should be checking relabel_from and relabel_to. But if the superblock has already been labeled (with fscontext) then context= is actually labeling the inodes, and so we should be checking relabel_from and associate. This patch fixes which checks are called depending on the mount options. Signed-off-by:
Eric Paris <eparis@redhat.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Acked-by:
James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Adrian Bunk authored
The lockdep options should depend on DEBUG_KERNEL since: - they are kernel debugging options and - they do otherwise break the DEBUG_KERNEL menu structure Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Kylene Jo Hall authored
Fix the start and len variables that should be using the new resource_size_t. Signed_off_by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Kylene Jo Hall authored
Some machine manufacturers are not sticking to the TCG specifications and including an ACPI DSDT entry for the TPM which allows PNP discovery of the device. Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Kylene Jo Hall authored
Under stress testing I found that the interrupt is not always cleared. Signed-off-by:
-
