- 21 Jun, 2007 28 commits
-
-
David Brownell authored
GPMC updates: - bugfixes: wrong/missing flags, omitted write, wrong test - don't map memory segments starting at zero - improve debug messaging - export gpmc_get_fclk_perio]d() since it's needed to calc timings - expect gpmc_cs_set_timings() caller to have initialized sync vs async Note that this API is glitchy; likely the best fix would be to add a member to "struct gpmc_timings" to hold GPMC_CONFIG1, since that holds one key aspect of the GPMC timings (the gpmc_fclk divisor, and sync vs. async == whether that divisor matters). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Remove some conflicting declarations in omap2/memory.c so that the file builds again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kyungmin Park authored
Update Apollon board init to initialize NAND, USB, and LEDs. Also configure GPMC memory for smc91x Ethernet. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Use virtual addresses directly instead of physical addresses to avoid having to recalculate the virtual address with every register access. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Place SMS and SDRC into smart idle mode Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Eduardo Valentin authored
This is an updated patch to fix lcd for H2 board. It uses platform_data field to pass spi_device to lcd driver. Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
H2 / H3 boards use this chip, update their board files. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
These were left out from the board file when merging these drivers, add them here. Call GPIO init from the board file as well, since the platform device init code uses the GPIO API. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Mistral-specific: - Add PWL-driven LCD backlight device - Apply power to the board even when the LCD isn't configured; things like EEPROM, temperature sensor, and wakeup switch depend on it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Add omap osk defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Update omap h2 defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
This patch syncs omap board specific files with linux-omap tree. Patch consists mostly of driver updates done in linux-omap tree for drivers not yet in mainline kernel. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Vladimir Ananiev authored
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Marek Vasut authored
This patch adds board file and necessary includes for Palm Tungsten|T. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Andrzej Zaborowski authored
Add palmte board config bits for TSC2102 controlled devices. This will enable touchscreen, audio and APM code to report battery level. If there are other boards at some point that use a TSC2102, similar code can be used. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Marek Vasut authored
Palmz71 specific things - board file. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Jonathan McDowell authored
This adds support for the keypad on the top of the Amstrad Delta. It's just a standard omap-keypad so all we need to do is add the keypad layout and platform data to the board definition file. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Andrzej Zaborowski authored
General update of the board file for Palm Tungsten E. Registers the platform devices contained in the PDA (ROM chip, keypad, infra-red) and updates the configuration for USB and MMC, whose config values were previously guessed in most cases due to lack of documentation (and now are confirmed by a number of users). Macros for GPIO pins are moved to a file in include/asm-arm/arch-omap. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
The SoSSI driver should already take care of this by enabling / disabling its clock when necessary, so this legacy callout from the PM idle code is not needed any more. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
This is needed, so that disabling the SoSSI clock during idle can be prevented. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Support the camera connector on the OSK Mistral add-on board: - define muxing for both camera controllers - mux both of them for Mistral - teach ov9640 glue about mistral powerup/powerdown Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Marek Vasut authored
This patch enables some clock on omap310. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Enable serial idling and wakeup features Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
The APLLs are most efficiently idled by hardware. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dirk Behme authored
Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Bugfixes for the OSK led support: - Fix Kconfig merge glitches: Mistral handles idle and timer leds just fine - Fix pm_suspend() runtime botch: can't sleep, so can't touch tps65010 leds Improvements: - Switch sense of Mistral idle led, so idle == off Probably the TPS65010 leds should be handled only by the "new led" API. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Remove the OMAP1 version of omap_dm_timer_get_fclk(), and its associated compile-time warning. It would only BUG() if called, while it's only called on OMAP2. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kevin Hilman authored
Fix unsupported one-shot mode in set_mode hook. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 17 Jun, 2007 1 commit
-
-
Linus Torvalds authored
The manatees, they are dancing! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Jun, 2007 11 commits
-
-
Eric W. Biederman authored
Some user space tools need to identify SYSV shared memory when examining /proc/<pid>/maps. To do so they look for a block device with major zero, a dentry named SYSV<sysv key>, and having the minor of the internal sysv shared memory kernel mount. To help these tools and to make it easier for people just browsing /proc/<pid>/maps this patch modifies hugetlb sysv shared memory to use the SYSV<key> dentry naming convention. User space tools will still have to be aware that hugetlb sysv shared memory lives on a different internal kernel mount and so has a different block device minor number from the rest of sysv shared memory. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Albert Cahalan <acahalan@gmail.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Adam Litke authored
Here's another breakage as a result of shared memory stacked files :( The NUMA policy for a VMA is determined by checking the following (in the order given): 1) vma->vm_ops->get_policy() (if defined) 2) vma->vm_policy (if defined) 3) task->mempolicy (if defined) 4) Fall back to default_policy By switching to stacked files for shared memory, get_policy() is now always set to shm_get_policy which is a wrapper function. This causes us to stop at step 1, which yields NULL for hugetlb instead of task->mempolicy which was the previous (and correct) result. This patch modifies the shm_get_policy() wrapper to maintain steps 1-3 for the wrapped vm_ops. (akpm: the refcounting of mempolicies is busted and this patch does nothing to improve it) Signed-off-by: Adam Litke <agl@us.ibm.com> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: dean gaudet <dean@arctic.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
We have to take care that when we call udf_discard_prealloc() from udf_clear_inode() we have to write inode ourselves afterwards (otherwise, some changes might be lost leading to leakage of blocks, use of free blocks or improperly aligned extents). Also udf_discard_prealloc() does two different things - it removes preallocated blocks and truncates the last extent to exactly match i_size. We move the latter functionality to udf_truncate_tail_extent(), call udf_discard_prealloc() when last reference to a file is dropped and call udf_truncate_tail_extent() when inode is being removed from inode cache (udf_clear_inode() call). We cannot call udf_truncate_tail_extent() earlier as subsequent open+write would find the last block of the file mapped and happily write to the end of it, although the last extent says it's shorter. [akpm@linux-foundation.org: Make checkpatch.pl happier] Signed-off-by: Jan Kara <jack@suse.cz> Cc: Eric Sandeen <sandeen@sandeen.net> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Lameter authored
If ARCH_KMALLOC_MINALIGN is set to a value greater than 8 (SLUBs smallest kmalloc cache) then SLUB may generate duplicate slabs in sysfs (yes again) because the object size is padded to reach ARCH_KMALLOC_MINALIGN. Thus the size of the small slabs is all the same. No arch sets ARCH_KMALLOC_MINALIGN larger than 8 though except mips which for some reason wants a 128 byte alignment. This patch increases the size of the smallest cache if ARCH_KMALLOC_MINALIGN is greater than 8. In that case more and more of the smallest caches are disabled. If we do that then the count of the active general caches that is displayed on boot is not correct anymore since we may skip elements of the kmalloc array. So count them separately. This approach was tested by Havard yesterday. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Benjamin Herrenschmidt authored
Some changes done a while ago to avoid pounding on ptep_set_access_flags and update_mmu_cache in some race situations break sun4c which requires update_mmu_cache() to always be called on minor faults. This patch reworks ptep_set_access_flags() semantics, implementations and callers so that it's now responsible for returning whether an update is necessary or not (basically whether the PTE actually changed). This allow fixing the sparc implementation to always return 1 on sun4c. [akpm@linux-foundation.org: fixes, cleanups] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: David Miller <davem@davemloft.net> Cc: Mark Fortescue <mark@mtfhpc.demon.co.uk> Acked-by: William Lee Irwin III <wli@holomorphy.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Mackall authored
(As reported by linux@horizon.com) Folding is done to minimize the theoretical possibility of systematic weakness in the particular bits of the SHA1 hash output. The result of this bug is that 16 out of 80 bits are un-folded. Without a major new vulnerability being found in SHA1, this is harmless, but still worth fixing. Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: <linux@horizon.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Dike authored
The x86_64 a.out.h got a definition of STACK_TOP_MAX, which interferes with the UML version. So, just undef it like STACK_TOP. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Dike authored
Distros seem to be removing PAGE_SIZE from asm/page.h. So, the libc side of UML should stop using it. I replace it with UM_KERN_PAGE_SIZE, which is defined to be the same as PAGE_SIZE on the kernel side of the house. I could also use getpagesize(), but it's more important that UML have the same value of PAGE_SIZE everywhere. It's conceivable that it could be built with a larger PAGE_SIZE, and use of getpagesize() would break that badly. PAGE_MASK got the same treatment, as it is closely tied to PAGE_SIZE. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Brownell authored
Update two points in the SPI interface documentation: - Update description of the "chip stays selected after message ends" mode. In some cases it's required for correctness; it isn't just a performance tweak. (Yes: to use this mode on mult-device busses, another programming interface will be needed. One draft has been circulated already.) - Clarify spi_setup(), highlighting that callers must ensure that no requests are queued (can't change configuration except between I/Os), and that the device must be deselected when this returns (which is a key part of why it's called during device init). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Accetta authored
If raid1/repair (which reads all block and fixes any differences it finds) hits a read error, it doesn't reset the bio for writing before writing correct data back, so the read error isn't fixed, and the device probably gets a zero-length write which it might complain about. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
NeilBrown authored
1/ When resyncing a degraded raid10 which has more than 2 copies of each block, garbage can get synced on top of good data. 2/ We round the wrong way in part of the device size calculation, which can cause confusion. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-