- 22 Mar, 2006 40 commits
-
-
Patrick McHardy authored
Fix missing inversion in address matching, it was broken during the conversion to x_tables. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
x_tables matches and targets that require nf_conntrack_ipv[4|6] to work don't have enough information to load on demand these modules. This patch introduces the following changes to solve this issue: o nf_ct_l3proto_try_module_get: try to load the layer 3 connection tracker module and increases the refcount. o nf_ct_l3proto_module put: drop the refcount of the module. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
Set the family field in xt_[matches|targets] registered. Signed-off-by:
-
Pablo Neira Ayuso authored
Currently the first conntrack ID assigned is 2, use 1 instead. Signed-off-by:
-
Pablo Neira Ayuso authored
Fix oversized message, use NLMSG_SPACE just one since it reserves space for the netlink header and NFA_SPACE for every attribute. Thanks to Harald Welte for the feedback Signed-off-by:
-
Pablo Neira Ayuso authored
The expectation mask has some particularities that requires a different handling. The protocol number fields can be set to non-valid protocols, ie. l3num is set to 0xFFFF. Since that protocol does not exist, the mask tuple will not be dumped. Moreover, this results in a kernel panic when nf_conntrack accesses the array of protocol handlers, that is PF_MAX (0x1F) long. This patch introduces the function ctnetlink_exp_dump_mask, that correctly dumps the expectation mask. Such function uses the l3num value from the expectation tuple that is a valid layer 3 protocol number. The value of the l3num mask isn't dumped since it is meaningless from the userspace side. Thanks to Yasuyuki Kozakai and Patrick McHardy for the feedback. Signed-off-by:
-
Thomas Vgtle authored
Signed-off-by:
Thomas Vgtle <tv@lio96.de> Signed-off-by:
-
Patrick McHardy authored
do_ipv6_getsockopt returns -EINVAL for unknown options, not -ENOPROTOOPT as do_ipv6_setsockopt. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (124 commits) [ALSA] version 1.0.11rc4 [PATCH] Intruduce DMA_28BIT_MASK [ALSA] hda-codec - Add support for ASUS P4GPL-X [ALSA] hda-codec - Add support for HP nx9420 laptop [ALSA] Fix memory leaks in error path of control.c [ALSA] AMD Au1x00: AC'97 controller is memory mapped [ALSA] AMD Au1x00: fix DMA init/cleanup [ALSA] hda-codec - Fix generic auto-configurator [ALSA] hda-codec - Fix BIOS auto-configuration [ALSA] Fixes typos in Audiophile-USB.txt [ALSA] ice1712 - typo fixes for dxr_enable module option [ALSA] AMD Au1x00: make driver build after cleanup [ALSA] ice1712 - Fix wrong value types for enum items [ALSA] fix resource leak in usbmixer [ALSA] Fix gus_pcm dereference before NULL [ALSA] Fix seq_clientmgr dereferences before NULL check [ALSA] hda-codec - Fix for Samsung R65 and ASUS A6J [ALSA] hda-codec - Add support for VAIO FE550G and SZ110 [ALSA] usb-audio: add Maya44 mixer control names [ALSA] usb-audio: add Casio PL-40R support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: fixed path to moved file in include/linux/device.h Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description Documentation/dvb/get_dvb_firmware: fix firmware URL Documentation: Update to BUG-HUNTING Remove superfluous NOTIFY_COOKIE_LEN define add "tags" to .gitignore Fix "frist", "fisrt", typos fix rwlock usage example It's UTF-8
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add a secondary TSB for hugepage mappings. [SPARC]: Respect vm_page_prot in io_remap_page_range().
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Bump driver version and reldate. [TG3]: Skip phy power down on some devices [TG3]: Fix SRAM access during tg3_init_one() [X25]: dte facilities 32 64 ioctl conversion [X25]: allow ITU-T DTE facilities for x25 [X25]: fix kernel error message 64 bit kernel [X25]: ioctl conversion 32 bit user to 64 bit kernel [NET]: socket timestamp 32 bit handler for 64 bit kernel [NET]: allow 32 bit socket ioctl in 64 bit kernel [BLUETOOTH]: Return negative error constant
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (138 commits) [SCSI] libata: implement minimal transport template for ->eh_timed_out [SCSI] eliminate rphy allocation in favour of expander/end device allocation [SCSI] convert mptsas over to end_device/expander allocations [SCSI] allow displaying and setting of cache type via sysfs [SCSI] add scsi_mode_select to scsi_lib.c [SCSI] 3ware 9000 add big endian support [SCSI] qla2xxx: update MAINTAINERS [SCSI] scsi: move target_destroy call [SCSI] fusion - bump version [SCSI] fusion - expander hotplug suport in mptsas module [SCSI] fusion - exposing raid components in mptsas [SCSI] fusion - memory leak, and initializing fields [SCSI] fusion - exclosure misspelled [SCSI] fusion - cleanup mptsas event handling functions [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure [SCSI] fusion - static fix's [SCSI] fusion - move some debug firmware event debug msgs to verbose level [SCSI] fusion - loginfo header update [SCSI] add scsi_reprobe_device [SCSI] megaraid_sas: fix extended timeout handling ...
-
James Morris authored
Add a slab cache for the SELinux inode security struct, one of which is allocated for every inode instantiated by the system. The memory savings are considerable. On 64-bit, instead of the size-128 cache, we have a slab object of 96 bytes, saving 32 bytes per object. After booting, I see about 4000 of these and then about 17,000 after a kernel compile. With this patch, we save around 530KB of kernel memory in the latter case. On 32-bit, the savings are about half of this. Signed-off-by:
James Morris <jmorris@namei.org> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
James Morris authored
Remove an unneded pointer variable in selinux_inode_init_security(). Signed-off-by:
-
James Morris authored
A further fix is needed for selinuxfs link count management, to ensure that the count is correct for the parent directory when a subdirectory is created. This is only required for the root directory currently, but the code has been updated for the general case. Signed-off-by:
-
James Morris authored
Fix copy & paste error in sel_make_avc_files(), removing a supurious call to d_genocide() in the error path. All of this will be cleaned up by kill_litter_super(). Signed-off-by:
-
James Morris authored
Remove the call to sel_make_bools() from sel_fill_super(), as policy needs to be loaded before the boolean files can be created. Policy will never be loaded during sel_fill_super() as selinuxfs is kernel mounted during init and the only means to load policy is via selinuxfs. Also, the call to d_genocide() on the error path of sel_make_bools() is incorrect and replaced with sel_remove_bools(). Signed-off-by:
-
James Morris authored
Unify the error path of sel_fill_super() so that all errors pass through the same point and generate an error message. Also, removes a spurious dput() in the error path which breaks the refcounting for the filesystem (litter_kill_super() will correctly clean things up itself on error). Signed-off-by:
-
James Morris authored
Use existing sel_make_dir() helper to create booleans directory rather than duplicating the logic. Signed-off-by:
-
James Morris authored
Fix the hard link count for selinuxfs directories, which are currently one short. Signed-off-by:
-
Stephen Smalley authored
Simplify sel_read_bool to use the simple_read_from_buffer helper, like the other selinuxfs functions. Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Cc: James Morris <jmorris@namei.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Stephen Smalley authored
This patch disables the automatic labeling of new inodes on disk when no policy is loaded. Discussion is here: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=180296 In short, we're changing the behavior so that when no policy is loaded, SELinux does not label files at all. Currently it does add an 'unlabeled' label in this case, which we've found causes problems later. SELinux always maintains a safe internal label if there is none, so with this patch, we just stick with that and wait until a policy is loaded before adding a persistent label on disk. The effect is simply that if you boot with SELinux enabled but no policy loaded and create a file in that state, SELinux won't try to set a security extended attribute on the new inode on the disk. This is the only sane behavior for SELinux in that state, as it cannot determine the right label to assign in the absence of a policy. That state usually doesn't occur, but the rawhide installer seemed to be misbehaving temporarily so it happened to show up on a test install. Signed-off-by:
-
Christoph Lameter authored
Centralize the page migration functions in anticipation of additional tinkering. Creates a new file mm/migrate.c 1. Extract buffer_migrate_page() from fs/buffer.c 2. Extract central migration code from vmscan.c 3. Extract some components from mempolicy.c 4. Export pageout() and remove_from_swap() from vmscan.c 5. Make it possible to configure NUMA systems without page migration and non-NUMA systems with page migration. I had to so some #ifdeffing in mempolicy.c that may need a cleanup. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Paul Jackson authored
The alien cache rotor in mm/slab.c assumes that the first online node is node 0. Eventually for some archs, especially with hotplug, this will no longer be true. Fix the interleave rotor to handle the general case of node numbering. Signed-off-by:
Paul Jackson <pj@sgi.com> Acked-by:
Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Paul Jackson authored
Fix bogus node loop in hugetlb.c alloc_fresh_huge_page(), which was assuming that nodes are numbered contiguously from 0 to num_online_nodes(). Once the hotplug folks get this far, that will be false. Signed-off-by:
-
Akinobu Mita authored
When we've allocated SWAPFILE_CLUSTER pages, ->cluster_next should be the first index of swap cluster. But current code probably sets it wrong offset. Signed-off-by:
Akinobu Mita <mita@miraclelinux.com> Acked-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Christoph Lameter authored
1. Only disable interrupts if there is actually something to free 2. Only dirty the pcp cacheline if we actually freed something. 3. Disable interrupts for each single pcp and not for cleaning all the pcps in all zones of a node. drain_node_pages is called every 2 seconds from cache_reap. This fix should avoid most disabling of interrupts. Signed-off-by:
-
Christoph Lameter authored
The list_lock also protects the shared array and we call drain_array() with the shared array. Therefore we cannot go as far as I wanted to but have to take the lock in a way so that it also protects the array_cache in drain_pages. (Note: maybe we should make the array_cache locking more consistent? I.e. always take the array cache lock for shared arrays and disable interrupts for the per cpu arrays?) Signed-off-by:
-
Christoph Lameter authored
Remove drain_array_locked and use that opportunity to limit the time the l3 lock is taken further. Signed-off-by:
-
Christoph Lameter authored
And a parameter to drain_array to control the freeing of all objects and then use drain_array() to replace instances of drain_array_locked with drain_array. Doing so will avoid taking locks in those locations if the arrays are empty. Signed-off-by:
-
Christoph Lameter authored
cache_reap takes the l3->list_lock (disabling interrupts) unconditionally and then does a few checks and maybe does some cleanup. This patch makes cache_reap() only take the lock if there is work to do and then the lock is taken and released for each cleaning action. The checking of when to do the next reaping is done without any locking and becomes racy. Should not matter since reaping can also be skipped if the slab mutex cannot be acquired. The same is true for the touched processing. If we get this wrong once in awhile then we will mistakenly clean or not clean the shared cache. This will impact performance slightly. Note that the additional drain_array() function introduced here will fall out in a subsequent patch since array cleaning will now be very similar from all callers. Signed-off-by:
-
Rafael J. Wysocki authored
Make shrink_all_memory() repeat the attempts to free more memory if there seems to be no pages to free. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Chen, Kenneth W authored
follow_hugetlb_page() walks a range of user virtual address and then fills in list of struct page * into an array that is passed from the argument list. It also gets a reference count via get_page(). For compound page, get_page() actually traverse back to head page via page_private() macro and then adds a reference count to the head page. Since we are doing a virt to pte look up, kernel already has a struct page pointer into the head page. So instead of traverse into the small unit page struct and then follow a link back to the head page, optimize that with incrementing the reference count directly on the head page. The benefit is that we don't take a cache miss on accessing page struct for the corresponding user address and more importantly, not to pollute the cache with a "not very useful" round trip of pointer chasing. This adds a moderate performance gain on an I/O intensive database transaction workload. Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Chen, Kenneth W authored
Implementation of hugetlbfs_counter() is functionally equivalent to atomic_inc_return(). Use the simpler atomic form. Signed-off-by:
-
David Gibson authored
Quite a long time back, prepare_hugepage_range() replaced is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to verify if an address range is suitable for a hugepage mapping. is_aligned_hugepage_range() stuck around, but only to implement prepare_hugepage_range() on archs which didn't implement their own. Most archs (everything except ia64 and powerpc) used the same implementation of is_aligned_hugepage_range(). On powerpc, which implements its own prepare_hugepage_range(), the custom version was never used. In addition, "is_aligned_hugepage_range()" was a bad name, because it suggests it returns true iff the given range is a good hugepage range, whereas in fact it returns 0-or-error (so the sense is reversed). This patch cleans up by abolishing is_aligned_hugepage_range(). Instead prepare_hugepage_range() is defined directly. Most archs use the default version, which simply checks the given region is aligned to the size of a hugepage. ia64 and powerpc define custom versions. The ia64 one simply checks that the range is in the correct address space region in addition to being suitably aligned. The powerpc version (just as previously) checks for suitable addresses, and if necessary performs low-level MMU frobbing to set up new areas for use by hugepages. No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR). Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Zhang Yanmin <yanmin.zhang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by:
-
David Gibson authored
The optional hugepage callback, hugetlb_free_pgd_range() is presently implemented non-trivially only on ia64 (but I plan to add one for powerpc shortly). It has its own prototype for the function in asm-ia64/pgtable.h. However, since the function is called from generic code, it make sense for its prototype to be in the generic hugetlb.h header file, as the protypes other arch callbacks already are (prepare_hugepage_range(), set_huge_pte_at(), etc.). This patch makes it so. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by:
-
David Gibson authored
Turns out the hugepage logic in free_pgtables() was doubly broken. The loop coalescing multiple normal page VMAs into one call to free_pgd_range() had an off by one error, which could mean it would coalesce one hugepage VMA into the same bundle (checking 'vma' not 'next' in the loop). I transferred this bug into the new is_vm_hugetlb_page() based version. Here's the fix. This one didn't bite on powerpc previously for the same reason the is_hugepage_only_range() problem didn't: powerpc's hugetlb_free_pgd_range() is identical to free_pgd_range(). It didn't bite on ia64 because the hugepage region is distant enough from any other region that the separated PMD_SIZE distance test would always prevent coalescing the two together. No libhugetlbfs testsuite regressions (ppc64, POWER5). Signed-off-by:
-
David Gibson authored
free_pgtables() has special logic to call hugetlb_free_pgd_range() instead of the normal free_pgd_range() on hugepage VMAs. However, the test it uses to do so is incorrect: it calls is_hugepage_only_range on a hugepage sized range at the start of the vma. is_hugepage_only_range() will return true if the given range has any intersection with a hugepage address region, and in this case the given region need not be hugepage aligned. So, for example, this test can return true if called on, say, a 4k VMA immediately preceding a (nicely aligned) hugepage VMA. At present we get away with this because the powerpc version of hugetlb_free_pgd_range() is just a call to free_pgd_range(). On ia64 (the only other arch with a non-trivial is_hugepage_only_range()) we get away with it for a different reason; the hugepage area is not contiguous with the rest of the user address space, and VMAs are not permitted in between, so the test can't return a false positive there. Nonetheless this should be fixed. We do that in the patch below by replacing the is_hugepage_only_range() test with an explicit test of the VMA using is_vm_hugetlb_page(). This in turn changes behaviour for platforms where is_hugepage_only_range() returns false always (everything except powerpc and ia64). We address this by ensuring that hugetlb_free_pgd_range() is defined to be identical to free_pgd_range() (instead of a no-op) on everything except ia64. Even so, it will prevent some otherwise possible coalescing of calls down to free_pgd_range(). Since this only happens for hugepage VMAs, removing this small optimization seems unlikely to cause any trouble. This patch causes no regressions on the libhugetlbfs testsuite - ppc64 POWER5 (8-way), ppc64 G5 (2-way) and i386 Pentium M (UP). Signed-off-by:
-
