- 04 Dec, 2006 17 commits
-
-
Benjamin Herrenschmidt authored
Add a "parent" struct device to our PCI host bridge data structure so that PCI can be rooted off another device in sysfs. Note that arch/ppc doesn't use it, only arch/powerpc, though it's available for both 32 and 64 bits. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
The BUID is the first entry of a PCI host bridge "reg" property. Now that PCI busses can be anywhere in the device-tree, we need to fully translate the value there to a CPU physical address before we can use it with RTAS. Signed-off-by:
-
Benjamin Herrenschmidt authored
When parsing the OF "ranges" properties of PCI host busses to determine the mapping of a PCI bus, we need to translate the "parent" address using the prom_parse.c routines in order to obtain a CPU physical address. This wasn't necessary while PCI busses were always at the root of the device-tree but this is no longer the case on Cell where they can be anywhere in the tree. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch adds a bus device notifier to the of_platform bus type on cell to setup the DMA operations for of_platform_devices. We currently use the PCI operations as Cell use a special version of them that happens to be suitable for our needs. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch completely refactors DMA operations for 64 bits powerpc. 32 bits is untouched for now. We use the new dev_archdata structure to add the dma operations pointer and associated data to struct device. While at it, we also add the OF node pointer and numa node. In the future, we might want to look into merging that with pci_dn as well. The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced by a set of generic iommu and direct DMA ops (non PCI specific) that can be used by bus types. The toplevel implementation is now inline. Signed-off-by:
-
Benjamin Herrenschmidt authored
Remove the now unused "liobn" field in ibmveth which also avoids having insider knowledge of the iommu table in that driver. Signed-off-by:
Santiago Leon <santil@us.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
Hook up of_platform_bus_probe with the cell platform in order to publish the non-PCI devices in the device-tree of cell blades as of_platform_device(s) Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch first splits of_device.c and of_platform.c, the later containing the bits relative to of_platform_device's. On the "breaks" side of things, drivers uisng of_platform_device(s) need to include asm/of_platform.h now and of_(un)register_driver is now of_(un)register_platform_driver. In addition to a few utility functions to locate of_platform_device(s), the main new addition is of_platform_bus_probe() which allows the platform code to trigger an automatic creation of of_platform_devices for a whole tree of devices. The function acts based on the type of the various "parent" devices encountered from a provided root, using either a default known list of bus types that can be "probed" or a passed-in list. It will only register devices on busses matching that list, which mean that typically, it will not register PCI devices, as expected (since they will be picked up by the PCI layer). This will be used by Cell platforms using 4xx-type IOs in the Axon bridge and can be used by any embedded-type device as well. Signed-off-by:
-
Benjamin Herrenschmidt authored
Add support for southbridges using the MPIC interrupt controller to the native cell platforms. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch applies on top of the MPIC DCR support. It makes the MPIC driver capable of a lot more auto-configuration based on the device-tree, for example, it can retreive it's own physical address if not passed as an argument, find out if it's DCR or MMIO mapped, and set the BIG_ENDIAN flag automatically in the presence of a "big-endian" property in the device-tree node. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch implements support for DCR based MPIC implementations. Such implementations have the MPIC_USES_DCR flag set and don't use the phys_addr argument of mpic_alloc (they require a valid dcr mapping in the device node) This version of the patch can use a little bif of cleanup still (I can probably consolidate rb->dbase/doff, at least once I'm sure on how the hardware is actually supposed to work vs. possible simulator issues) and it should be possible to build a DCR-only version of the driver. I need to cleanup a bit the CONFIG_* handling for that and probably introduce CONFIG_MPIC_MMIO and CONFIG_MPIC_DCR. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch makes the EMAC driver use the new DCR access methods. It doesn't yet uses dcr_map() and thus still only work with real DCRs. This will be fixed in a later patch Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by:
-
Benjamin Herrenschmidt authored
These were inherited from ARCH=ppc, but are not needed since parsing of interrupts should be done via the of_* functions (who can do swizzling). If we ever need to do non-standard swizzling on bridges without a device-node, then we might add back a slightly different version of ppc_md.pci_swizzle but for now, that is not the case. I removed the couple of calls for these in 83xx. If that breaks something, then there is a problem with the device-tree on these. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch reworks the way IRQs are fixed up on PCI for arch powerpc. It makes pci_read_irq_line() called by default in the PCI code for devices that are probed, and add an optional per-device fixup in ppc_md for platforms that really need to correct what they obtain from pci_read_irq_line(). It also removes ppc_md.irq_bus_setup which was only used by pSeries and should not be needed anymore. I've also removed the pSeries s7a workaround as it can't work with the current interrupt code anyway. I'm trying to get one of these machines working so I can test a proper fix for that problem. I also haven't updated the old-style fixup code from 85xx_cds.c because it's actually buggy :) It assigns pci_dev->irq hard coded numbers which is no good with the new IRQ mapping code. It should at least use irq_create_mapping(NULL, hard_coded_number); and possibly also set_irq_type() to set them as level low. Signed-off-by:
-
Linus Torvalds authored
Allow architectures to provide their own implementation of the big endian MMIO accessors and "repeat" MMIO accessors for use by the generic iomap. Signed-off-by:
Linus Torvalds <torvalds@osdl.org> More-or-less-tested-by:
-
Paul Mackerras authored
-
- 03 Dec, 2006 23 commits
-
-
Jamal Hadi Salim authored
aevents can not uniquely identify an SA. We break the ABI with this patch, but consensus is that since it is not yet utilized by any (known) application then it is fine (better do it now than later). Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yasuyuki Kozakai authored
To use ipv6_find_hdr(), IP6_NF_IPTABLES is necessary. Signed-off-by:
Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by:
-
Alexey Dobriyan authored
David Binderman's icc logs: net/rose/rose_route.c(399): remark #593: variable "err" was set but never used Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Yasuyuki Kozakai authored
Signed-off-by:
-
Patrick McHardy authored
- move EXPORT_SYMBOL next to exported symbol - use EXPORT_SYMBOL_GPL since this is what the original code used Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
Also remove the references to "new connection tracking" from Kconfig. After some short stabilization period of the new connection tracking helpers/NAT code the old one will be removed. Signed-off-by:
-
Patrick McHardy authored
Add nf_conntrack port of the SNMP NAT helper. Signed-off-by:
-
Patrick McHardy authored
Add IPv4 and IPv6 capable nf_conntrack port of the TFTP conntrack/NAT helper. Signed-off-by:
-
Patrick McHardy authored
Add IPv4 and IPv6 capable nf_conntrack port of the SIP conntrack/NAT helper. Signed-off-by:
-
Patrick McHardy authored
Add nf_conntrack port of the PPtP conntrack/NAT helper. Since there seems to be no IPv6-capable PPtP implementation the helper only support IPv4. Signed-off-by:
-
Patrick McHardy authored
Add nf_conntrack port of the NetBIOS name service conntrack helper. Signed-off-by:
-
Patrick McHardy authored
Add nf_conntrack port of the IRC conntrack/NAT helper. Since DCC doesn't support IPv6 yet, the helper is still IPv4 only. Signed-off-by:
-
Patrick McHardy authored
Add IPv4 and IPv6 capable nf_conntrack port of the H.323 conntrack/NAT helper. Signed-off-by:
-
Patrick McHardy authored
Add IPv4 and IPv6 capable nf_conntrack port of the Amanda conntrack/NAT helper. Signed-off-by:
-
Patrick McHardy authored
Expectation address masks need to be differently initialized depending on the address family, create helper function to avoid cluttering up the code too much. Signed-off-by:
-
Jozsef Kadlecsik authored
Add FTP NAT helper. Split out from Jozsef's big nf_nat patch with a few small fixes by myself. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Jozsef Kadlecsik authored
Add NAT support for nf_conntrack. Joint work of Jozsef Kadlecsik, Yasuyuki Kozakai, Martin Josefsson and myself. Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Patrick McHardy authored
Improve the connection tracking selection (well, the user experience, not really the aesthetics) by offering one option to enable connection tracking and a choice between the implementations. Signed-off-by:
-
Patrick McHardy authored
Some helpers (namely H.323) manually assign further helpers to expected connections. This is not possible with nf_conntrack anymore since we need to know whether a helper is used at allocation time. Handle the helper assignment centrally, which allows to perform the correct allocation and as a nice side effect eliminates the need for the H.323 helper to fiddle with nf_conntrack_lock. Mid term the allocation scheme really needs to be redesigned since we do both the helper and expectation lookup _twice_ for every new connection. Signed-off-by:
-
Patrick McHardy authored
Resync with Al Viro's ip_conntrack annotations and fix a missed spot in ip_nat_proto_icmp.c. Signed-off-by:
-
Patrick McHardy authored
Adding the alignment to the size doesn't make any sense, what it should do is align the size of the conntrack structure to the alignment requirements of the helper structure and return an aligned pointer in nfct_help(). Signed-off-by:
-
Patrick McHardy authored
NF_CONNTRACK_PROC_COMPAT depends on NF_CONNTRACK_IPV4, not NF_CONNTRACK. Signed-off-by:
-
