Commits · 7b4d5b8b39fd3701ed3693a89f2bd8f6ef49bce2 · linux / linux-davinci-2.6.23

27 Sep, 2006 40 commits

[PATCH] NOMMU: Check VMA protections · 7b4d5b8b

David Howells authored Sep 27, 2006

Check the VMA protections in get_user_pages() against what's being asked.

This checks to see that we don't accidentally write on a non-writable VMA or
permit an I/O mapping VMA to be accessed (which may lack page structs).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

7b4d5b8b

[PATCH] Check if start address is in vma region in NOMMU function get_user_pages() · 910e46da

Sonic Zhang authored Sep 27, 2006

In NOMMU arch, if run "cat /proc/self/mem", data from physical address 0
are read.  This behavior is different from MMU arch.  In IA32, message
"cat: /proc/self/mem: Input/output error" is reported.

This issue is rootcaused by not validate the start address in NOMMU
function get_user_pages().  Following patch solves this issue.
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

910e46da

[PATCH] NOMMU: Use find_vma() rather than reimplementing a VMA search · 0159b141

David Howells authored Sep 27, 2006

Use find_vma() in the NOMMU version of access_process_vm() rather than
reimplementing it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

0159b141

[PATCH] NOMMU: Set BDI capabilities for /dev/mem and /dev/kmem · 5da6185b

David Howells authored Sep 27, 2006

Set the backing device info capabilities for /dev/mem and /dev/kmem to
permit direct sharing under no-MMU conditions and full mapping capabilities
under MMU conditions.  Make the BDI used by these available to all directly
mappable character devices.

Also comment the capabilities for /dev/zero.

[akpm@osdl.org: ifdef reductions]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5da6185b

[PATCH] NOMMU: Check that access_process_vm() has a valid target · 0ec76a11

David Howells authored Sep 27, 2006

Check that access_process_vm() is accessing a valid mapping in the target
process.

This limits ptrace() accesses and accesses through /proc/<pid>/maps to only
those regions actually mapped by a program.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

0ec76a11

[PATCH] AVR32: Use unsigned long flags for saving interrupt state · 361f6ed1

Haavard Skinnemoen authored Sep 27, 2006

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

361f6ed1

[PATCH] Mark __remove_vm_area() static · d24afc57

Rolf Eike Beer authored Sep 27, 2006

The function is exported but not used from anywhere else.  It's also marked as
"not for driver use" so noone out there should really care.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

d24afc57

[PATCH] Fix kerneldoc comments in mm/vmalloc.c · ead04089

Rolf Eike Beer authored Sep 27, 2006

The empty line between the short description and the first argument
description causes a section to appear twice in the generated manpage.
Also the short description should really be short: the script can't handle
multiple lines.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ead04089

[PATCH] mm/page_alloc: use NULL instead of 0 for ptr · 423b41d7

Randy Dunlap authored Sep 27, 2006

Use NULL instead of 0 for pointer value, eliminate sparse warnings.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

423b41d7

[PATCH] mspec driver · 17a3b050

Jes Sorensen authored Sep 27, 2006

Implement the special memory driver (mspec) based on the do_no_pfn
approach.  The driver is currently used only on SN2 hardware with special
fetchop support but could be beneficial on other architectures using the
uncached mode.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

17a3b050

[PATCH] do_no_pfn() · f4b81804

Jes Sorensen authored Sep 27, 2006

Implement do_no_pfn() for handling mapping of memory without a struct page
backing it.  This avoids creating fake page table entries for regions which
are not backed by real memory.

This feature is used by the MSPEC driver and other users, where it is
highly undesirable to have a struct page sitting behind the page (for
instance if the page is accessed in cached mode via the struct page in
parallel to the the driver accessing it uncached, which can result in data
corruption on some architectures, such as ia64).

This version uses specific NOPFN_{SIGBUS,OOM} return values, rather than
expect all negative pfn values would be an error.  It also bugs on cow
mappings as this would not work with the VM.

[akpm@osdl.org: micro-optimise]
Signed-off-by: Jes Sorensen <jes@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

f4b81804

[PATCH] zone_statistics: Use hot node instead of cold zone_pgdat · 5d292343

Christoph Lameter authored Sep 27, 2006

Now that we have the node in the hot zone of struct zone we can avoid
accessing zone_pgdat in zone_statistics.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5d292343

[PATCH] Do not allocate pagesets for unpopulated zones. · 66a55030

Christoph Lameter authored Sep 27, 2006

We do not need to allocate pagesets for unpopulated zones.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

66a55030

[PATCH] Add node to zone for the NUMA case · d5f541ed

Christoph Lameter authored Sep 27, 2006

Add the node in order to optimize zone_to_nid.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

d5f541ed

[PATCH] GFP_THISNODE for the slab allocator · 765c4507

Christoph Lameter authored Sep 27, 2006

This patch insures that the slab node lists in the NUMA case only contain
slabs that belong to that specific node.  All slab allocations use
GFP_THISNODE when calling into the page allocator.  If an allocation fails
then we fall back in the slab allocator according to the zonelists appropriate
for a certain context.

This allows a replication of the behavior of alloc_pages and alloc_pages node
in the slab layer.

Currently allocations requested from the page allocator may be redirected via
cpusets to other nodes.  This results in remote pages on nodelists and that in
turn results in interrupt latency issues during cache draining.  Plus the slab
is handing out memory as local when it is really remote.

Fallback for slab memory allocations will occur within the slab allocator and
not in the page allocator.  This is necessary in order to be able to use the
existing pools of objects on the nodes that we fall back to before adding more
pages to a slab.

The fallback function insures that the nodes we fall back to obey cpuset
restrictions of the current context.  We do not allocate objects from outside
of the current cpuset context like before.

Note that the implementation of locality constraints within the slab allocator
requires importing logic from the page allocator.  This is a mischmash that is
not that great.  Other allocators (uncached allocator, vmalloc, huge pages)
face similar problems and have similar minimal reimplementations of the basic
fallback logic of the page allocator.  There is another way of implementing a
slab by avoiding per node lists (see modular slab) but this wont work within
the existing slab.

V1->V2:
- Use NUMA_BUILD to avoid #ifdef CONFIG_NUMA
- Exploit GFP_THISNODE being 0 in the NON_NUMA case to avoid another
  #ifdef

[akpm@osdl.org: build fix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

765c4507

[PATCH] Disable GFP_THISNODE in the non-NUMA case · 77f700da

Christoph Lameter authored Sep 27, 2006

GFP_THISNODE must be set to 0 in the non numa case otherwise we disable retry
and warnings for failing allocations in the SMP and UP case.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

77f700da

[PATCH] Add NUMA_BUILD definition in kernel.h to avoid #ifdef CONFIG_NUMA · 08e0f6a9

Christoph Lameter authored Sep 27, 2006

The NUMA_BUILD constant is always available and will be set to 1 on
NUMA_BUILDs.  That way checks valid only under CONFIG_NUMA can easily be done
without #ifdef CONFIG_NUMA

F.e.

if (NUMA_BUILD && <numa_condition>) {
...
}

[akpm: not a thing we'd normally do, but CONFIG_NUMA is special: it is
 causing ifdef explosion in core kernel, so let's see if this is a comfortable
 way in whcih to control that]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

08e0f6a9

[PATCH] Condense output of show_free_areas() · c7241913

Jes Sorensen authored Sep 27, 2006

On larger systems, the amount of output dumped on the console when you do
SysRq-M is beyond insane.  This patch is trying to reduce it somewhat as
even with the smaller NUMA systems that have hit the desktop this seems to
be a fair thing to do.

The philosophy I have taken is as follows:
 1) If a zone is empty, don't tell, we don't need yet another line
    telling us so. The information is available since one can look up
    the fact how many zones were initialized in the first place.
 2) Put as much information on a line is possible, if it can be done
    in one line, rahter than two, then do it in one. I tried to format
    the temperature stuff for easy reading.

Change show_free_areas() to not print lines for empty zones.  If no zone
output is printed, the zone is empty.  This reduces the number of lines
dumped to the console in sysrq on a large system by several thousand lines.

Change the zone temperature printouts to use one line per CPU instead of
two lines (one hot, one cold).  On a 1024 CPU, 1024 node system, this
reduces the console output by over a million lines of output.

While this is a bigger problem on large NUMA systems, it is also applicable
to smaller desktop sized and mid range NUMA systems.

Old format:

Mem-info:
Node 0 DMA per-cpu:
cpu 0 hot: high 42, batch 7 used:24
cpu 0 cold: high 14, batch 3 used:1
cpu 1 hot: high 42, batch 7 used:34
cpu 1 cold: high 14, batch 3 used:0
cpu 2 hot: high 42, batch 7 used:0
cpu 2 cold: high 14, batch 3 used:0
cpu 3 hot: high 42, batch 7 used:0
cpu 3 cold: high 14, batch 3 used:0
cpu 4 hot: high 42, batch 7 used:0
cpu 4 cold: high 14, batch 3 used:0
cpu 5 hot: high 42, batch 7 used:0
cpu 5 cold: high 14, batch 3 used:0
cpu 6 hot: high 42, batch 7 used:0
cpu 6 cold: high 14, batch 3 used:0
cpu 7 hot: high 42, batch 7 used:0
cpu 7 cold: high 14, batch 3 used:0
Node 0 DMA32 per-cpu: empty
Node 0 Normal per-cpu: empty
Node 0 HighMem per-cpu: empty
Node 1 DMA per-cpu:
[snip]
Free pages:     5410688kB (0kB HighMem)
Active:9536 inactive:4261 dirty:6 writeback:0 unstable:0 free:338168 slab:1931 mapped:1900 pagetables:208
Node 0 DMA free:1676304kB min:3264kB low:4080kB high:4896kB active:128048kB inactive:61568kB present:1970880kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA32 free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 HighMem free:0kB min:512kB low:512kB high:512kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA free:1951728kB min:3280kB low:4096kB high:4912kB active:5632kB inactive:1504kB present:1982464kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
....

New format:

Mem-info:
Node 0 DMA per-cpu:
CPU    0: Hot: hi:   42, btch:   7 usd:  41   Cold: hi:   14, btch:   3 usd:   2
CPU    1: Hot: hi:   42, btch:   7 usd:  40   Cold: hi:   14, btch:   3 usd:   1
CPU    2: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    3: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    4: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    5: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    6: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    7: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
Node 1 DMA per-cpu:
[snip]
Free pages:     5411088kB (0kB HighMem)
Active:9558 inactive:4233 dirty:6 writeback:0 unstable:0 free:338193 slab:1942 mapped:1918 pagetables:208
Node 0 DMA free:1677648kB min:3264kB low:4080kB high:4896kB active:129296kB inactive:58864kB present:1970880kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA free:1948448kB min:3280kB low:4096kB high:4912kB active:6864kB inactive:3536kB present:1982464kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

c7241913

[PATCH] slab: fix kmalloc_node applying memory policies if nodeid == numa_node_id() · de3083ec

Christoph Lameter authored Sep 27, 2006

kmalloc_node() falls back to ___cache_alloc() under certain conditions and
at that point memory policies may be applied redirecting the allocation
away from the current node.  Therefore kmalloc_node(...,numa_node_id()) or
kmalloc_node(...,-1) may not return memory from the local node.

Fix this by doing the policy check in __cache_alloc() instead of
____cache_alloc().

This version here is a cleanup of Kiran's patch.

- Tested on ia64.
- Extra material removed.
- Consolidate the exit path if alternate_node_alloc() returned an object.

[akpm@osdl.org: warning fix]
Signed-off-by: Alok N Kataria <alok.kataria@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

de3083ec

[PATCH] page invalidation cleanup · 0fd0e6b0

Nick Piggin authored Sep 27, 2006

Clean up the invalidate code, and use a common function to safely remove
the page from pagecache.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

0fd0e6b0

[PATCH] own header file for struct page · 5b99cd0e

Heiko Carstens authored Sep 27, 2006

This moves the definition of struct page from mm.h to its own header file
page-struct.h.  This is a prereq to fix SetPageUptodate which is broken on
s390:

#define SetPageUptodate(_page)
       do {
               struct page *__page = (_page);
               if (!test_and_set_bit(PG_uptodate, &__page->flags))
                       page_test_and_clear_dirty(_page);
       } while (0)

_page gets used twice in this macro which can cause subtle bugs.  Using
__page for the page_test_and_clear_dirty call doesn't work since it causes
yet another problem with the page_test_and_clear_dirty macro as well.

In order to avoid all these problems caused by macros it seems to be a good
idea to get rid of them and convert them to static inline functions.
Because of header file include order it's necessary to have a seperate
header file for the struct page definition.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5b99cd0e

[PATCH] vm: add per-zone writeout counter · e129b5c2

Andrew Morton authored Sep 27, 2006

The VM is supposed to minimise the number of pages which get written off the
LRU (for IO scheduling efficiency, and for high reclaim-success rates). But
we don't actually have a clear way of showing how true this is.

So add `nr_vmscan_write' to /proc/vmstat and /proc/zoneinfo - the number of
pages which have been written by the vm scanner in this zone and globally.

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

e129b5c2