- 22 May, 2007 20 commits
-
-
Jonathan Corbet authored
The proper method for powering down the sensor on OLPC systems has changed somewhat; in particular, the sensor must be powered down completely (rather than simply told to power down) or the associated "camera active" LED will stay on. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
matthieu castet authored
Allow to use SECAM-BG with the FI1216MF tuner. The selection is done with the secam=B module argument. The default behaviour should be the same as before. Signed-off-by:
Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Simon Arlott authored
dvb-core is not started early enough when device drivers that use dvb are compiled in so dvb_register_device fails (silently) since dvb_class is NULL, this runs dvb_init using subsys_initcall instead of module_init. dvb_register_device will now check the return value of class_device_create. Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Hans Verkuil authored
Reverted the change to struct v4l2_pix_format. I completely missed that this struct was used by existing ioctls so that changing it broke the ABI. I will have to think of another way of setting the top/left coordinates but for now this change is reverted to preserve compatibility. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
ivtv were wrongly marked as dependent of USB. Signed-off-by: -
Stephen Rothwell authored
commit e8edc6e0 added an include of linux/jiffies.h in linux/smb_fs.h outside the ifdef __KERNEL__. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Woodhouse authored
This should make it stop immediately after printing the _helpful_ error message, rather than continuing to spit out many pages more of 'CHECK include/linux/foo.h' before eventually coming to a halt with something less obvious. Now I get this... CHECK include/linux/smb_fs.h /shiny/git/linux-2.6/usr/include/linux/smb_fs.h requires linux/jiffies.h, which does not exist in exported headers make[2]: *** [/shiny/git/linux-2.6/usr/include/linux/.check.smb_fs.h] Error 1 make[1]: *** [linux] Error 2 make: *** [headers_check] Error 2 Signed-off-by-if-Sam-says-so: David Woodhouse <dwmw2@infradead.org> [ Sam had better say so! This made me waste way too much time. - Linus] Signed-off-by: -
Jeff Garzik authored
This from a "tested" patch... Signed-off-by:
Jeff Garzik <jeff@garzik.org> Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Linus Torvalds authored
This reverts commit f892b7d4, which totally broke the build on x86 with CONFIG_RELOCATABLE (which, as far as I can tell, is the only case where it should even matter!) due to a SIGSEGV in modpost. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Add constant for FCS/CRC length (frame check sequence) declance: Remove a dangling spin_unlock_irq() thingy e1000: Don't enable polling in open() (was: e1000: assertion hit in e1000_clean(), kernel 2.6.21.1)
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: bump versions libata: Trim trailing whitespace libata: Kiss post_set_mode goodbye ata_piix: clean up pata_hpt366: Enable bits are unreliable so don't use them libata: Add Seagate STT20000A to DMA blacklist. ahci: disable 64bit dma on sb600
-
Jeff Garzik authored
Signed-off-by: -
Jeff Garzik authored
Signed-off-by: -
Alan Cox authored
As of the -mm tree we don't have post_set_mode users any more. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
With cable methods in place we don't need a custom error handler for SATA so get rid of it Signed-off-by:
-
Alan Cox authored
Various people had problems with both old and new IDE when hpt366 enable bits started getting honoured. It turns out they are not reliable so don't rely on them Signed-off-by:
-
Dave Jones authored
http://bugzilla.kernel.org/show_bug.cgi?id=1044 points out an additional hard disk that doesn't handle DMA transfers correctly. This patch is the libata variant of the earlier patch to drivers/ide/ Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Tejun Heo authored
SB600 claims it can do 64bit DMA but it can't. Disable it. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
-
- 21 May, 2007 20 commits
-
-
Auke Kok authored
About a dozen drivers that have some form of crc checksumming or offloading use this constant, warranting a global define for it. Signed-off-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
-
Maciej W. Rozycki authored
The spin_unlock_irq() invocation in lance_start_xmit() has no matching locking request. The call is already protected by netif_tx_lock, so remove the statement. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Auke Kok authored
Herbert Xu wrote: "netif_poll_enable can only be called if you've previously called netif_poll_disable. Otherwise a poll might already be in action and you may get a crash like this." Removing the call to netif_poll_enable in e1000_open should fix this issue, the only other call to netif_poll_enable is in e1000_up() which is only reached after a device reset or resume. Bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=8455 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=240339 Tested by Doug Chapman <doug.chapman@hp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/cm: Improve local id allocation IPoIB/cm: Fix SRQ WR leak IB/ipoib: Fix typos in error messages IB/mlx4: Check if SRQ is full when posting receive IB/mlx4: Pass send queue sizes from userspace to kernel IB/mlx4: Fix check of opcode in mlx4_ib_post_send() mlx4_core: Fix array overrun in dump_dev_cap_flags() IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions IB/mthca: Fix RESET to ERROR transition IB/mlx4: Set GRH:HopLimit when sending globally routed MADs IB/mthca: Set GRH:HopLimit when building MLX headers IB/mlx4: Fix check of max_qp_dest_rdma in modify QP IB/mthca: Fix use-after-free on device restart IB/ehca: Return proper error code if register_mr fails IPoIB: Handle P_Key table reordering IB/core: Use start_port() and end_port() IB/core: Add helpers for uncached GID and P_Key searches IB/ipath: Fix potential deadlock with multicast spinlocks IB/core: Free umem when mm is already gone
-
Michael S. Tsirkin authored
The IB CM uses an idr for local id allocations, with a running counter as start_id. This fails to generate distinct ids if 1. An id is constantly created and destroyed 2. A chunk of ids just beyond the current next_id value is occupied This in turn leads to an increased chance of connection request being mis-detected as a duplicate, sometimes for several retries, until next_id gets past the block of allocated ids. This has been observed in practice. As a fix, remember the last id allocated and start immediately above it. This also fixes a problem with the old code, where next_id might overflow and become negative. Signed-off-by:
Michael S. Tsirkin <mst@dev.mellanox.co.il> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Michael S. Tsirkin authored
SRQ WR leakage has been observed with IPoIB/CM: e.g. flipping ports on and off will, with time, leak out all WRs and then all connections will start getting RNR NAKs. Fix this in the way suggested by spec: move the QP being destroyed to the error state, wait for "Last WQE Reached" event and then post WR on a "drain QP" connected to the same CQ. Once we observe a completion on the drain QP, it's safe to call ib_destroy_qp. Signed-off-by:
-
Michael S. Tsirkin authored
Trivial error message fixups. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fix: mm/slab: fix section mismatch warning mm: fix section mismatch warnings init/main: use __init_refok to fix section mismatch kbuild: introduce __init_refok/__initdata_refok to supress section mismatch warnings all-archs: consolidate .data section definition in asm-generic all-archs: consolidate .text section definition in asm-generic kbuild: add "Section mismatch" warning whitelist for powerpc kbuild: make better section mismatch reports on i386, arm and mips kbuild: make modpost section warnings clearer kconfig: search harder for curses library in check-lxdialog.sh kbuild: include limits.h in sumversion.c for PATH_MAX powerpc: Fix the MODALIAS generation in modpost for of devices
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] More verbose show_mem() like other architectures. [S390] Make use of kretprobe_assert. [S390] Wire up signald, timerfd and eventfd syscalls. [S390] Wire up sys_utimensat. [S390] cio: Update documentation.
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Fix race condition about network device name allocation. [IPV4]: icmp: fix crash with sysctl_icmp_errors_use_inbound_ifaddr [NETFILTER]: nf_conntrack_ipv4: fix incorrect #ifdef config name [NETFILTER]: nf_conntrack: fix use-after-free in helper destroy callback invocation [IPSEC] pfkey: Load specific algorithm in pfkey_add rather than all [TCP] FRTO: Prevent state inconsistency in corner cases [TCP] FRTO: Add missing ECN CWR sending to one of the responses [NET]: Fix net/core/skbuff.c gcc-3.2.3 compilation error [RFKILL]: Fix check for correct rfkill allocation [IPV6]: Add ip6_tunnel.h to headers_install
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] spelling fixes [ARM] at91_adc parenthesis balance [ARM] 4400/1: S3C24XX: Add high-speed MMC device definition [ARM] 4399/2: S3C2443: Fix SMDK2443 nand timings [ARM] 4398/1: S3C2443: Fix watchdog IRQ number [ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguity [ARM] 4396/1: S3C2443: Add missing HCLK clocks [ARM] 4395/1: S3C24XX: add include of <linux/sysdev.h> to relevant machines [ARM] 4388/1: no need for arm/mm mmap range checks for non-mmu [ARM] 4387/1: fix /proc/cpuinfo formatting for pre-ARM7 parts [ARM] ARMv6: add CPU_HAS_ASID configuration [ARM] integrator: fix pci_v3 compile error with DEBUG_LL [ARM] gic: Fix gic cascade irq handling [ARM] Silence OMAP kernel configuration warning [ARM] Update ARM syscalls [ARM] 4384/1: S3C2412/13 SPI registers offset correction [ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop files [ARM] 4382/1: iop13xx: fix msi support [ARM] Remove Integrator/CP SMP platform support [ARM] 4378/1: KS8695: Serial driver fix ...
-
Anton Altaparmakov authored
This fixes the LDM driver so that it works with Windows Vista dynamic disks which are subtly different to Windows 2000/XP ones. The patch was needed to get a Vista formatted dynamic disk to be recognized and parsed successfully. Thanks go to Chris Teachworth for the report and testing. Cc: Richard Russon <ldm@flatcap.org> Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Brian Gerst authored
cr4 is a 32-bit register, so casting the mask to an unsigned char is wrong, as it clears more than the PGE bit. Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
john stultz authored
The vsyscall time() function basically returns the second portion of xtime directly. This however means that there is about a ticks worth of time each second where time() will return a second value less then what gettimeofday() does. Additionally, this window where vtime() is behind vgettimeofday() grows when dynticks is enabled, so its probably good to get this in before dynticks lands. Big thanks to Sripathi for noticing this issue and creating a test case to work with! This patch changes the vtime() implemenation to call vgettimeofday(), much as syscall time() implementation calls gettimeofday(). 2.6.21 stable candidate too Signed-off-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
-
Yinghai Lu authored
In commit d358788f Author: Russell King <rmk@dyn-67.arm.linux.org.uk> Date: Mon Mar 20 20:00:09 2006 +0000 Glen Turner reported that writing LFCR rather than the more traditional CRLF causes issues with some terminals. Since this afflicts many serial drivers, extract the common code to a library function (uart_console_write) and arrange for each driver to supply a "putchar" function. but early_printk is left out. Signed-off-by:
Yinghai Lu <yinghai.lu@sun.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andi Kleen authored
Fix boot failures with the early CPUID checking on VIA C3 Includes fixes from Christian Volkmann Signed-off-by:
-
Christian Volkmann authored
- boot/setup.S did not print "PANIC: CPU too old for this kernel" ( not visible, also the message did not match ) - I add "# missed before: set ds" => somebody should check if I am right with the way to set. => seems to be a generic error in setup.S not to set "ds" for error messages. AK: extracted patch out of other changes AK: also couldn't find any other case where ds is wrong Signed-off-by:
-
Andi Kleen authored
It reports machine check capability in CPUID, but doesn't actually implement all the necessary MSRs of the standard Intel machine check architecture. This fixes a boot failure on K6s recently introduced. Signed-off-by:
-
Andi Kleen authored
The ifdef tests were broken. Assume it acts like gcc 4 Signed-off-by:
-
Andi Kleen authored
Only try to allocate MSRs once instead of for every CPU. This assumes the MSRs are the same on all CPUs which is currently true. P4-HT is a special case for different SMT threads, but the code always saves/restores all MSRs so it works identical. Signed-off-by:
-
