- 12 Feb, 2007 40 commits
-
-
Chuck Lever authored
The rq_daddr field must support larger addresses. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chuck Lever authored
Expand the rq_addr field to allow it to contain larger addresses. Specifically, we replace a 'sockaddr_in' with a 'sockaddr_storage', then everywhere the 'sockaddr_in' was referenced, we use instead an accessor function (svc_addr_in) which safely casts the _storage to _in. Signed-off-by:
-
Chuck Lever authored
Sockaddr_storage will allow us to store arbitrary socket addresses in the svc_deferred_req struct. Signed-off-by:
-
Chuck Lever authored
There are loads of places where the RPC server assumes that the rq_addr fields contains an IPv4 address. Top among these are error and debugging messages that display the server's IP address. Let's refactor the address printing into a separate function that's smart enough to figure out the difference between IPv4 and IPv6 addresses. Signed-off-by:
-
Chuck Lever authored
Clean-up: msg_name and msg_namelen are not used by sock_recvmsg, so don't bother to set them in svc_recvfrom. Signed-off-by:
-
Chuck Lever authored
The remote peer's address won't change after the socket has been accepted. We don't need to call ->getname on every incoming request. Signed-off-by:
-
NeilBrown authored
Rather than calling svc_sock_enqueue at the end of svc_setup_socket, we now call it (via svc_sock_recieved) after calling svc_setup_socket at each call site. We do this because a subsequent patch will insert some code between the two calls at one call site. Signed-off-by:
-
Chuck Lever authored
Sometimes we need to create an RPC service but not register it with the local portmapper. NFSv4 delegation callback, for example. Change the svc_makesock() API to allow optionally creating temporary or permanent sockets, optionally registering with the local portmapper, and make it return the ephemeral port of the new socket. Signed-off-by:
-
Chuck Lever authored
Currently in the RPC server, registering with the local portmapper and creating "permanent" sockets are tied together. Expand the internal APIs to allow these two socket characteristics to be separately specified. This will be externalized in the next patch. Signed-off-by:
-
Ahmed S. Darwish authored
Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by:
Ahmed S. Darwish <darwish.07@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Michael Buesch authored
I think the following patch should go into the kernel, until the ISDN/CAPI guys create the real fix for this issue. The issue is a concurrency issue with some internal CAPI data structure which can crash the kernel. On my FritzCard DSL with the AVM driver it crashes about once a day without this workaround patch. With this workaround patch it's rock-stable (at least on UP, but I don't see why this shouldn't work on SMP as well. But maybe I'm missing something.) This workaround is kind of a sledgehammer which inserts a global lock to wrap around all the critical sections. Of course, this is a scalability issue, if you have many ISDN/CAPI cards. But it prevents a crash. So I vote for this fix to get merged, until people come up with a better solution. Better have a stable kernel that's less scalable, than a crashing and useless kernel. This bug is in the kernel since 2.6.15 (at least). Signed-off-by:
Michael Buesch <mb@bu3sch.de> Cc: Kai Germaschewski <kai.germaschewski@gmx.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Richard Knutsson authored
Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Acked-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Richard Knutsson authored
Signed-off-by:
-
Robert P. J. Day authored
Rename the macro CONFIG_HISAX_HFC4S8S_PCIMEM to simply HISAX_HFC4S8S_PCIMEM so that it no longer resembles a user-settable kernel config macro. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
-
Robert P. J. Day authored
Based on advice from K. Keil, get rid of remaining traces of defunct test emulator for HISAX. Signed-off-by:
-
Robert P. J. Day authored
Based on advice from K. Keil, rename the special debug option CONFIG_SERIAL_NOPAUSE_IO to ELSA_SERIAL_NOPAUSE_IO so it no longer resembles a user-selectable kernel config option. Signed-off-by:
-
Robert P. J. Day authored
Rename some of the debugging macros for ISDN AVM so that they don't resemble kernel config settings, as they're primarily for author debugging instead. Signed-off-by:
-
Robert P. J. Day authored
Replace misspelled CONFIG_HISAX_QUADRO with CONFIG_HISAX_SCT_QUADRO. Signed-off-by:
-
Ahmed S. Darwish authored
Signed-off-by:
-
Adrian Bunk authored
Add proper prototypes in a header file for global code under drivers/isdn/sc/. Since the GNU C compiler is now able do tell us that caller and callee disagreed about the number of arguments of setup_buffers(), this patch also fixes this bug. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Adrian Bunk authored
- add functions prototypes for some global functions to header files - remove unneeded "extern"s from some function prototypes You might note that this patch results in a new warning - that's due to the fact that with a proper prototype gcc is able to discover a broken work_struct conversion. Signed-off-by:
-
Adrian Bunk authored
Add correct prototypes in header files for global functions and variables. Signed-off-by:
-
Philipp Zabel authored
Arch-neutral GPIO calls for S3C24xx. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Philipp Zabel authored
Arch-neutral GPIO calls for SA-1100. Signed-off-by:
-
Philipp Zabel authored
Arch-neutral GPIO calls for PXA. Signed-off-by:
-
David Brownell authored
This is a first cut at making the AT91 code use the generic GPIO calls. Note that the original AT91 GPIO calls merged the "mux pin as GPIO" and "set GPIO direction" functionality into one API call, contrary to what's specified as a cross-platform portable model. So this involved a few non-inlinable functions. [akpm@osdl.org: cleanups] Signed-off-by:
-
David Brownell authored
This teaches OMAP how to implement the cross-platform GPIO interfaces. [akpm@osdl.org: cleanups] Signed-off-by:
-
David Brownell authored
This defines a simple and minimalist programming interface for GPIO APIs: - Documentation/gpio.txt ... describes things (read it) - include/asm-arm/gpio.h ... defines the ARM hook, which just punts to <asm/arch/gpio.h> for any implementation - include/asm-generic/gpio.h ... implement "can sleep" variants as calling the normal ones, for systems that don't handle i2c expanders. The immediate need for such a cross-architecture API convention is to support drivers that work the same on AT91 ARM and AVR32 AP7000 chips, which embed many of the same controllers but have different CPUs. However, several other users have been reported, including a driver for a hardware watchdog chip and some handhelds.org multi-CPU button drivers. Signed-off-by: -
eric wollesen authored
Eric Wollesen ported the Bluesmoke Memory Controller driver for the Intel 5000X/V/P (Blackford/Greencreek) chipset to the in kernel EDAC model. This patch incorporates those required changes to the edac_mc.c and edac_mc.h core files by added new Fully Buffered DIMM interface to the EDAC Core module. Signed-off-by:
eric wollesen <ericw@xmtp.net> Signed-off-by:
doug thompson <norsk5@xmission.com> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Frithiof Jensen authored
This is an attempt of providing an interface for memory scrubbing control in EDAC. This patch modifies the EDAC Core to provide the Interface for memory controller modules to implment. The following things are still outstanding: - K8 is the first implemenation, The patch provide a method of configuring the K8 hardware memory scrubber via the 'mcX' sysfs directory. There should be some fallback to a generic scrubber implemented in software if the hardware does not support scrubbing. Or .. the scrubbing sysfs entry should not be visible at all. - Only works with SDRAM, not cache, The K8 can scrub cache and l2cache also - but I think this is not so useful as the cache is busy all the time (one hopes). One would also expect that cache scrubbing requires hardware support. - Error Handling, I would like that errors are returned to the user in "terms of file system". - Presentation, I chose Bandwidth in Bytes/Second as a representation of the scrubbing rate for the following reasons: I like that the sysfs entries are sort-of textual, related to something that makes sense instead of magical values that must be looked up. "My People" wants "% main memory scrubbed per hour" others prefer "% memory bandwidth used" as representation, "bandwith used" makes it easy to calculate both versions in one-liner scripts. If one later wants to scrub cache, the scaling becomes wierd for K8 changing from "blocks of 64 byte memory" to "blocks of 64 cache lines" to "blocks of 64 bit". Using "bandwidth used" makes sense in all three cases, (I.M.O. anyway ;-). - Discovery, There is no way to discover the possible settings and what they do without reading the code and the documentation. *I* do not know how to make that work in a practical way. - Bugs(??), other tools can set invalid values in the memory scrub control register, those will read back as '-1', requiring the user to reset the scrub rate. This is how *I* think it should be. - Afflicting other areas of code, I made changes to edac_mc.c and edac_mc.h which will show up globally - this is not nice, it would be better that the memory scrubbing fuctionality and interface could be entirely contained within the memory controller it applies to. Frithiof Jensen edac_mc.c and its .h file is a CORE helper module for EDAC driver modules. This provides the abstraction for device specific drivers. It is fine to modify this CORE to provide help for new features of the the drivers doug thompson Signed-off-by:
Frithiof Jensen <frithiof.jensen@ericson.com> Signed-off-by:
-
Mike Chan authored
This fix/change returns the offset into the page for the ce/ue error, instead of just 0. The e752x dram controller reads 34:6 of the linear address with the error. Signed-off-by:
Mike Chan <mikechan@google.com> Signed-off-by:
-
Brian Pomerantz authored
The reading of the DRA registers should be a byte at a time (one register at a time) instead of 4 bytes at a time (four registers). Reading a dword at a time retrieves erroneous information from all but the first register. A change was made to read in each register in a loop prior to using the data in those registers. Signed-off-by:
Brian Pomerantz <bapper@mvista.com> Signed-off-by:
Dave Jiang <djiang@mvista.com> Signed-off-by:
-
Brian Pomerantz authored
The fatal vs. non-fatal mask for the sysbus FERR status is incorrect according to the E7520 datasheet. This patch corrects the mask to correctly handle fatal and non-fatal errors. Signed-off-by:
-
Eric W. Biederman authored
Now that I have changed all of the in-tree users remove the old version of these functions. This should make it clear to any out of tree users that they should be using kill_pgrp kill_pgrp_info or __kill_pgrp_info instead. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Eric W. Biederman authored
Now that I have changed all of the users remove the old version of these functions. This should be a clear hint to any out of tree users that they should use do_each_pid_task and while_each_pid_task for new code. Signed-off-by:
-
Eric W. Biederman authored
There isn't any real advantage to this change except that it allows the old functions to be removed. Which is easier on maintenance and puts the code in a more uniform style. Signed-off-by:
-
Eric W. Biederman authored
Of kernel subsystems that work with pids the tty layer is probably the largest consumer. But it has the nice virtue that the assiation with a session only lasts until the session leader exits. Which means that no reference counting is required. So using struct pid winds up being a simple optimization to avoid hash table lookups. In the long term the use of pid_nr also ensures that when we have multiple pid spaces mixed everything will work correctly. Signed-off-by:
Eric W. Biederman <eric@maxwell.lnxi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Eric W. Biederman authored
Every call to is_orphaned_pgrp passed in process_group(current) which is racy with respect to another thread changing our process group. It didn't bite us because we were dealing with integers and the worse we would get would be a stale answer. In switching the checks to use struct pid to be a little more efficient and prepare the way for pid namespaces this race became apparent. So I simplified the calls to the more specialized is_current_pgrp_orphaned so I didn't have to worry about making logic changes to avoid the race. Signed-off-by:
-
Eric W. Biederman authored
Modify has_stopped_jobs and will_become_orphan_pgrp to use struct pid based process groups. This reduces the number of hash tables looks ups and paves the way for multiple pid spaces. Signed-off-by:
-
Eric W. Biederman authored
To properly implement a pid namespace I need to deal exclusively in terms of struct pid, because pid_t values become ambiguous. To this end session_of_pgrp is transformed to take and return a struct pid pointer. To avoid the need to worry about reference counting I now require my caller to hold the appropriate locks. Leaving callers repsonsible for increasing the reference count if they need access to the result outside of the locks. Since session_of_pgrp currently only has one caller and that caller simply uses only test the result for equality with another process group, the locking change means I don't actually have to acquire the tasklist_lock at all. tiocspgrp is also modified to take and release the lock. The logic there is a little more complicated but nothing I won't need when I convert pgrp of a tty to a struct pid pointer. Signed-off-by:
-
