- 23 Jun, 2006 38 commits
-
-
David Howells authored
Give the statfs superblock operation a dentry pointer rather than a superblock pointer. This complements the get_sb() patch. That reduced the significance of sb->s_root, allowing NFS to place a fake root there. However, NFS does require a dentry to use as a target for the statfs operation. This permits the root in the vfsmount to be used instead. linux/mount.h has been added where necessary to make allyesconfig build successfully. Interest has also been expressed for use with the FUSE and XFS filesystems. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
David Howells authored
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: -
Rachita Kothiyal authored
I have seen the cdrom drive appearing confused on using kdump on certain x86_64 systems. During the booting up of the second kernel, the following message would keep flooding the console, and the booting would not proceed any further. hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) In this patch, whenever we are hitting a confused state in the interrupt handler with the DRQ set, we end the request and return ide_stopped. Using this I dont see the status error. Signed-off-by:
Rachita Kothiyal <rachita@in.ibm.com> Acked-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: [PATCH] Driver core: fix locking issues with the devices that are attached to classes [PATCH] USB: get USB suspend to work again
-
Greg Kroah-Hartman authored
Doh, that was foolish... Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Yeah, it's a hack, but it is only temporary until Alan's patches reworking this area make it in. We really should not care what devices below us are doing, especially when we do not really know what type of devices they are. This patch relies on the fact that the endpoint devices do not have a driver assigned to us. Signed-off-by: -
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc: [ARM] 3565/1: AT91RM9200 MMC update [MMC] Convert all hosts except mmci to use data->blksz
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits) [ARM] 3629/1: S3C24XX: fix missing bracket in regs-dsc.h [ARM] 3537/1: Rework DMA-bounce locking for finer granularity [ARM] 3601/1: i.MX/MX1 DMA error handling for signaled channels only [ARM] 3597/1: ixp4xx/nslu2: Board support for new LED subsystem [ARM] 3595/1: ixp4xx/nas100d: Board support for new LED subsystem [ARM] 3626/1: ARM EABI: fix syscall restarting [ARM] 3628/1: S3C24XX: add get_rate call to struct clk [ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocks [ARM] 3613/1: S3C2410: Add sysdev and sysclass [ARM] 3624/1: Report true modem control line states [ARM] 3620/2: ixp23xx: add uengine loader support [ARM] 3618/1: add defconfig for logicpd pxa270 card engine [ARM] 3617/1: ep93xx: fix slightly incorrect timer tick rate [ARM] 3616/1: fix timer handler wrap logic for a number of platforms [ARM] 3615/1: ixp23xx: use platform devices for physmap flash [ARM] 3614/1: ep93xx: use platform devices for physmap flash [ARM] 3621/1: fix compilation breakage for pnx4008 [ARM] 3623/1: pnx4008: move GPIO-related defines to gpio.h [ARM] 3622/1: pnx4008: remove clk_use/clk_unuse [ARM] Enable VFP to be built when non-VFP capable CPUs are selected ...
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [ARM] 3600/1: increase amba-pl010 UART_NR to 8 [ARM] 3571/1: netX: serial driver for Hilscher netX
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix ondemand vs suspend deadlock [CPUFREQ] Fix powernow-k8 SMP kernel on UP hardware bug. [PATCH] redirect speedstep-centrino maintainer mail to cpufreq list [CPUFREQ] correct powernow-k8 fid/vid masks for extended parts [CPUFREQ] Clarify powernow-k8 cpu_family statements
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (33 commits) [PATCH] myri10ge - drop workaround pci_save_state() disabling MSI [PATCH] myri10ge - drop workaround for the missing AER ext cap on nVidia CK804 via-velocity: the link is not correctly detected when the device starts [PATCH] add b44 to maintainers [PATCH] WAN: ioremap() failure checks in drivers [PATCH] WAN: register_hdlc_device() doesn't need dev_alloc_name() [PATCH] skb_padto()-area fixes in 8390, wavelan [PATCH] make drivers/net/forcedeth.c:nv_update_pause() static [PATCH] network driver for Hilscher netx [PATCH] Dereference in tokenring/olympic.c [PATCH] Array overrun in drivers/net/wireless/wavelan.c [PATCH] Remove useless check in drivers/net/pcmcia/xirc2ps_cs.c [PATCH] 8139cp: add ethtool eeprom support [PATCH] 8139cp: fix eeprom read command length [PATCH] b44: update b44 Kconfig entry [PATCH] b44: update version to 1.01 [PATCH] b44: add wol for old nic [PATCH] b44: add parameter [PATCH] b44: add wol [PATCH] b44: fix manual speed/duplex/autoneg settings ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
-
Brice Goglin authored
We don't need to restore the state right after saving it for later recovery since commit 99dc804d (PCI: disable msi mode in pci_disable_device) now prevents pci_save_state() from disabling MSI. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Brice Goglin authored
We don't need to hardcode the AER capability of the nVidia CK804 chipset anymore since commit cf34a8e0 (PCI: nVidia quirk to make AER PCI-E extended capability visible) now makes sure that this cap will be available to pci_find_ext_capability(). Signed-off-by:
-
-
Gary Zambrano authored
Add b44 to the MAINTAINERS file. Signed-off-by:
Gary Zambrano <zambrano@broadcom.com> Signed-off-by:
-
Krzysztof Halasa authored
Eric Sesterhenn found that pci200syn initialization lacks return statement in ioremap() error path (coverity bug id #195). It looks like more WAN drivers have problems with ioremap(). Signed-off-by:
Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
-
Krzysztof Halasa authored
David Boggs noticed that register_hdlc_device() no longer needs to call dev_alloc_name() as it's called by register_netdev(). register_hdlc_device() is currently equivalent to register_netdev(). hdlc_setup() is now EXPORTed as per David's request. Signed-off-by:
-
Alan Cox authored
Ar Iau, 2006-06-22 am 21:29 +1000, ysgrifennodd Herbert Xu: > Alan Cox <alan@lxorguk.ukuu.org.uk> wrote: > > > > The 8390 change (corrected version) also makes 8390.c faster so should > > be applied anyway, and the orinoco one fixes some code that isn't even > > needed and someone forgot to remove long ago. Otherwise the skb_padto > > Yeah I agree totally. However, I haven't actually seen the fixed 8390 > version being posted yet or at least not to netdev :) Ah the resounding clang of a subtle hint ;) Signed-off-by:
Alan Cox <alan@redhat.com> - Return 8390.c to the old way of handling short packets (which is also faster) - Remove the skb_padto from orinoco. This got left in when the padding bad write patch was added and is actually not needed. This is fixing a merge error way back when. - Wavelan can also use the stack based buffer trick if you want Signed-off-by:
-
Adrian Bunk authored
This patch makes the needlessly global nv_update_pause() static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Sascha Hauer authored
This is a patch for the Hilscher netx builtin ethernet ports. The netx board support was merged into 2.6.17-git2. The netx is a arm926 based SoC. Signed-off-by:
Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> -- drivers/net/Kconfig | 11 drivers/net/Makefile | 1 drivers/net/netx-eth.c | 516 ++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/eth.h | 27 ++ 4 files changed, 555 insertions(+) Signed-off-by:
-
Eric Sesterhenn authored
hi, coverity found (bug id #225) that we might call free_netdev() with NULL argument, when alloc_trdev() fails. This patch changes the goto, so we dont call free_netdev() for dev == NULL. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
-
Eric Sesterhenn authored
hi, this is another array overrun spotted by coverity (#id 507) we should check the index against array size before using it. Not sure why the driver doesnt use ARRAY_SIZE instead of its own macro. Signed-off-by:
-
Eric Sesterhenn authored
hi, coverity choked at this check (id #223), assuming that skb might be NULL and used anyways later. Since start_hard_xmit() always gets called with a valid skb, the check is useless and this patch removes it. Signed-off-by:
-
Philip Craig authored
Implement the ethtool eeprom operations for the 8139cp driver. Tested on x86 and big-endian ARM. Signed-off-by:
Philip Craig <philipc@snapgear.com> Signed-off-by:
-
Philip Craig authored
The read command for the 93C46/93C56 EEPROMS should be 3 bits plus the address. This doesn't appear to affect the operation of the read command, but similar errors for write commands do cause failures. Signed-off-by:
-
Gary Zambrano authored
Deleted "EXPERIMENTAL" from b44 entry in Kconfig. Signed-off-by:
-
Gary Zambrano authored
Update the driver version to 1.01 Signed-off-by:
-
Gary Zambrano authored
This patch adds wol support for the older 440x nics that use pattern matching. This patch is a redo thanks to feedback from Michael Chan and Francois Romieu. Signed-off-by:
-
Gary Zambrano authored
This patch adds a parameter to init_hw() to not completely initialize the nic for wol. Signed-off-by:
-
Gary Zambrano authored
Adds wol to the driver. This is a redo of a previous patch thanks to feedback from Francois Romieu. Signed-off-by Gary Zambrano <zambrano@broadcom.com> Signed-off-by: -
Gary Zambrano authored
Fixes for speed/duplex/autoneg settings and driver settings info. This is a redo of a previous patch thanks to feedback from Jeff Garzik. Signed-off-by:
-
Andrew Victor authored
Adds power-management (suspend/resume) support to the AT91RM9200 Ethernet driver. Patch from David Brownell. Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
Andrew Victor authored
Moved global ether_clk variable into controller data structure. Patch from David Brownell. Davicom 9161 PHY was being incorrectly displayed as "9196". Patch from Brian Stafford. clk_get() doesn't return NULL on error, so the return value needs to be tested with IS_ERR(). Whitespace cleanup. Signed-off-by:
-
Andrew Victor authored
Adds support for the MII ioctls via generic_mii_ioctl(). Patch from Brian Stafford. Set the mii.phy_id to the detected PHY address, otherwise ethtool cannot access PHYs other than 0. Patch from Roman Kolesnikov. Signed-off-by:
-
Andrew Victor authored
For Ethernet PHYs that don't have an IRQ pin or boards that don't connect the IRQ pin to the processor, we enable a timer to poll the PHY's link state. Patch originally supplied by Eric Benard and Roman Kolesnikov. Signed-off-by:
-
Ralf Baechle authored
IOC3's homegrown DMA mapping functions that are used to optimize things a little on IP27 set the wrong bit. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Jeff Garzik authored
-
- 22 Jun, 2006 2 commits
-
-
Francois Romieu authored
The patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=6711Signed-off-by:
Roy Marples <uberlord@gentoo.org> Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (44 commits) [PATCH] I2C: I2C controllers go into right place on sysfs [PATCH] hwmon-vid: Add support for Intel Core and Conroe [PATCH] lm70: New hardware monitoring driver [PATCH] hwmon: Fix the Kconfig header [PATCH] i2c-i801: Merge setup function [PATCH] i2c-i801: Better pci subsystem integration [PATCH] i2c-i801: Cleanups [PATCH] i2c-i801: Remove PCI function check [PATCH] i2c-i801: Remove force_addr parameter [PATCH] i2c-i801: Fix block transaction poll loops [PATCH] scx200_acb: Documentation update [PATCH] scx200_acb: Mark scx200_acb_probe __init [PATCH] scx200_acb: Use PCI I/O resource when appropriate [PATCH] i2c: Mark block write buffers as const [PATCH] i2c-ocores: Minor cleanups [PATCH] abituguru: Fix fan detection [PATCH] abituguru: Review fixes [PATCH] abituguru: New hardware monitoring driver [PATCH] w83792d: Add missing data access locks [PATCH] w83792d: Fix setting the PWM value ...
-
