- 09 Jan, 2006 40 commits
-
-
Johann Lombardi authored
The patch below adds a new mount option to allow the external journal device to be specified. The syntax is as follows: # mount -t ext3 -o journal_dev=0x0820 ... where 0x0820 means major=8 and minor=32. Signed-off-by:
Johann Lombardi <johann.lombardi@bull.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Miklos Szeredi authored
Small cleanups in shared mounts code. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Cc: Ram Pai <linuxram@us.ibm.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Neil Brown authored
Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Ashok Raj authored
Thanks to Nathan Lynch for the review and comments. Thanks to Joel Schopp for the pointer to add user space scipts. Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by:
Joel Schopp <jschopp@austin.ibm.com> Signed-off-by:
-
Kylene Jo Hall authored
According to the TCG specifications measurements or hashes of the BIOS code and data are extended into TPM PCRS and a log is kept in an ACPI table of these extensions for later validation if desired. This patch exports the values in the ACPI table through a security-fs seq_file. Signed-off-by:
Seiji Munetoh <munetoh@jp.ibm.com> Signed-off-by:
Stefan Berger <stefanb@us.ibm.com> Signed-off-by:
Reiner Sailer <sailer@us.ibm.com> Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
zap_other_threads() sets SIGNAL_GROUP_EXIT at the very start, do_group_exit() doesn't need to do it. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Oleg Nesterov authored
__group_complete_signal() sets ->group_stop_count in sig_kernel_coredump() path and marks the target thread as ->group_exit_task. So any thread except group_exit_task will go to handle_group_stop()->finish_stop(). However, when group_exit_task actually starts do_coredump(), it sets SIGNAL_GROUP_EXIT, but does not reset ->group_stop_count while killing other threads. If we have not yet stopped threads in the same thread group, they all will spin in kernel mode until group_exit_task sends them SIGKILL, because ->group_stop_count > 0 means: recalc_sigpending_tsk() never clears TIF_SIGPENDING get_signal_to_deliver() goes to handle_group_stop() handle_group_stop() returns when SIGNAL_GROUP_EXIT set syscall_exit/resume_userspace notice TIF_SIGPENDING, call get_signal_to_deliver() again. So we are wasting cpu cycles, and if one of these threads is rt_task() this may be a serious problem. NOTE: do_coredump() holds ->mmap_sem, so not stopped threads can't escape coredumping after clearing ->group_stop_count. See also this thread: http://marc.theaimsgroup.com/?t=112739139900002Signed-off-by:
-
Oleg Nesterov authored
Use symbolic names instead of hardcoded constants. Signed-off-by:
Harald Welte <laforge@gnumonks.org> Signed-off-by:
-
Andrew Morton authored
We've had two instances recently of overflows when doing 64_bit_value = (32_bit_value << PAGE_CACHE_SHIFT) I did a tree-wide grep of `<<.*PAGE_CACHE_SHIFT' and this is the result. - afs_rxfs_fetch_descriptor.offset is of type off_t, which seems broken. - jfs and jffs are limited to 4GB anyway. - reiserfs map_block_for_writepage() takes an unsigned long for the block - it should take sector_t. (It'll fail for huge filesystems with blocksize<PAGE_CACHE_SIZE) - cramfs_read() needs to use sector_t (I think cramsfs is busted on large filesystems anyway) - affs is limited in file size anyway. - I generally didn't fix 32-bit overflows in directory operations. - arm's __flush_dcache_page() is peculiar. What if the page lies beyond 4G? - gss_wrap_req_priv() needs checking (snd_buf->page_base) Cc: Oleg Drokin <green@linuxhacker.ru> Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: <reiserfs-dev@namesys.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: <linux-fsdevel@vger.kernel.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Ben Collins authored
__create_workqueue() not checking return of alloc_percpu() NULL dereference was possible. Signed-off-by:
Ben Collins <bcollins@ubuntu.com> Signed-off-by:
-
taneli.vahakangas@netsonic.fi authored
<stuartm@connecttech.com> Sent by Paul Clements <paul.clements@steeleye.com>, who needs to read Documentation/SubmittingPatches.. Signed-off-by: -
Christoph Hellwig authored
HDIO_GETGEO is implemented in most block drivers, and all of them have to duplicate the code to copy the structure to userspace, as well as getting the start sector. This patch moves that to common code [1] and adds a ->getgeo method to fill out the raw kernel hd_geometry structure. For many drivers this means ->ioctl can go away now. [1] the s390 block drivers are odd in this respect. xpram sets ->start to 4 always which seems more than odd, and the dasd driver shifts the start offset around, probably because of it's non-standard sector size. Signed-off-by:Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@suse.de> Cc: <mike.miller@hp.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Xose Vazquez Perez authored
Signed-off-by:
-
George Anzinger authored
While rooting aroung in the signal code trying to understand how to fix the SIG_IGN ploy (set sig handler to SIG_IGN and flood system with high speed repeating timers) I came across what, I think, is a problem in sigaction() in that when processing a SIG_IGN request it flushes signals from 1 to SIGRTMIN and leaves the rest. Attempt to fix this. Signed-off-by:
George Anzinger <george@mvista.com> Cc: Roland McGrath <roland@redhat.com> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by:
-
David Howells authored
Make it possible for a running process (such as gssapid) to be able to instantiate a key, as was requested by Trond Myklebust for NFS4. The patch makes the following changes: (1) A new, optional key type method has been added. This permits a key type to intercept requests at the point /sbin/request-key is about to be spawned and do something else with them - passing them over the rpc_pipefs files or netlink sockets for instance. The uninstantiated key, the authorisation key and the intended operation name are passed to the method. (2) The callout_info is no longer passed as an argument to /sbin/request-key to prevent unauthorised viewing of this data using ps or by looking in /proc/pid/cmdline. This means that the old /sbin/request-key program will not work with the patched kernel as it will expect to see an extra argument that is no longer there. A revised keyutils package will be made available tomorrow. (3) The callout_info is now attached to the authorisation key. Reading this key will retrieve the information. (4) A new field has been added to the task_struct. This holds the authorisation key currently active for a thread. Searches now look here for the caller's set of keys rather than looking for an auth key in the lowest level of the session keyring. This permits a thread to be servicing multiple requests at once and to switch between them. Note that this is per-thread, not per-process, and so is usable in multithreaded programs. The setting of this field is inherited across fork and exec. (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that permits a thread to assume the authority to deal with an uninstantiated key. Assumption is only permitted if the authorisation key associated with the uninstantiated key is somewhere in the thread's keyrings. This function can also clear the assumption. (6) A new magic key specifier has been added to refer to the currently assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY). (7) Instantiation will only proceed if the appropriate authorisation key is assumed first. The assumed authorisation key is discarded if instantiation is successful. (8) key_validate() is moved from the file of request_key functions to the file of permissions functions. (9) The documentation is updated. From: <Valdis.Kletnieks@vt.edu> Build fix. Signed-off-by:David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Alexander Zangerl <az@bond.edu.au> Signed-off-by:
-
David Howells authored
Cause any links within a keyring to keys that match a key to be linked into that keyring to be discarded as a link to the new key is added. The match is contingent on the type and description strings being the same. This permits requests, adds and searches to displace negative, expired, revoked and dead keys easily. After some discussion it was concluded that duplicate valid keys should probably be discarded also as they would otherwise hide the new key. Since request_key() is intended to be the primary method by which keys are added to a keyring, duplicate valid keys wouldn't be an issue there as that function would return an existing match in preference to creating a new key. Signed-off-by:
-
David Howells authored
Add a new keyctl function that allows the expiry time to be set on a key or removed from a key, provided the caller has attribute modification access. Signed-off-by:
-
Guillaume Chazarain authored
kmsg_write returns with printk, so some programs may be confused by a successful write() with a return value different than the buffer length. # /bin/echo something > /dev/kmsg /bin/echo: write error: Inappropriate ioctl for device The drawbacks is that the printk return value can no more be quickly checked from userspace. Signed-off-by:
Guillaume Chazarain <guichaz@yahoo.fr> Signed-off-by:
-
Guillaume Chazarain authored
What's the true meaning of the printk return value? Should it include the priority prefix length of 3? and what about the timing information? In both cases it was broken: strace -e write echo 1 > /dev/kmsg => write(1, "1\n", 2) = 5 strace -e write echo "<1>1" > /dev/kmsg => write(1, "<1>1\n", 5) = 8 The returned length was "length of input string + 3", I made it "length of string output to the log buffer". Note that I couldn't find any printk caller in the kernel interested by its return value besides kmsg_write. Signed-off-by:
Tim Bird <tim.bird@am.sony.com> Signed-off-by:
-
NeilBrown authored
When making an fctl locking call through compat_sys_fcntl64 (i.e. a 32bit app on a 64bit kernel), the syscall can return a locking range that is in conflict with the queried lock. If some aspect of this range does not fit in the 32bit structure, something needs to be done. The current code is wrong in several respects: - It returns data to userspace even if no conflict was found i.e. it should check l_type for F_UNLCK - It returns -EOVERFLOW too agressively. A lock range covering the last possible byte of the file (start = COMPAT_OFF_T_MAX, len = 1) should be possible, but is rejected with the current test. - A extra-long 'len' should not be a problem. If only that part of the conflicting lock that would be visible to the 32bit app needs to be reported to the 32bit app anyway. This patch addresses those three issues and adds a comment to (hopefully) record it for posterity. Note: this patch mainly affects test-cases. Real applications rarely is ever see the problems. This patch has been tested (LSB test suite), and works. Signed-off-by:
-
NeilBrown authored
SUS requires that when truncating a file to the size that it currently is: truncate and ftruncate should NOT modify ctime or mtime O_TRUNC SHOULD modify ctime and mtime. Currently mtime and ctime are always modified on most local filesystems (side effect of ->truncate) or never modified (on NFS). With this patch: ATTR_CTIME|ATTR_MTIME are sent with ATTR_SIZE precisely when an update of these times is required whether size changes or not (via a new argument to do_truncate). This allows NFS to do the right thing for O_TRUNC. inode_setattr nolonger forces ATTR_MTIME|ATTR_CTIME when the ATTR_SIZE sets the size to it's current value. This allows local filesystems to do the right thing for f?truncate. Also, the logic in inode_setattr is changed a bit so there are two return points. One returns the error from vmtruncate if it failed, the other returns 0 (there can be no other failure). Finally, if vmtruncate succeeds, and ATTR_SIZE is the only change requested, we now fall-through and mark_inode_dirty. If a filesystem did not have a ->truncate function, then vmtruncate will have changed i_size, without marking the inode as 'dirty', and I think this is wrong. Signed-off-by: -
David Howells authored
Make it possible to include linux/pagevec.h multiple times without incurring errors due to duplicate definitions. Signed-off-by:
-
Antonino A. Daplas authored
Reported from Redhat Bugzilla Bug 170450 "I updated to the development kernel and now during boot only the top of the text is visable. For example the monitor screen the is the lines and I can only see text in the asterisk area.
-
Samuel Thibault authored
When doublescan mode is in use, scanlines must be doubled. Thanks to Jason Dravet <dravet@hotmail.com> for reporting and testing. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: <stable@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
inode can never be NULL when calling this function. Signed-off-by:
-
Christoph Hellwig authored
The ptrace_get_task_struct() helper that I added as part of the ptrace consolidation is useful in variety of places that currently opencode it. Switch them to the common helpers. Add a ptrace_traceme() helper that needs to be explicitly called, and simplify the ptrace_get_task_struct() interface. We don't need the request argument now, and we return the task_struct directly, using ERR_PTR() for error returns. It's a bit more code in the callers, but we have two sane routines that do one thing well now. Signed-off-by:
-
Tom Zanussi authored
librelay and relay-app.h have been retired - update Documentation to reflect that. Signed-off-by:
Tom Zanussi <zanussi@us.ibm.com> Signed-off-by:
-
Tom Zanussi authored
This patch renames relayfs_file_operations to relay_file_operations, and the file operations themselves from relayfs_XXX to relay_file_XXX, to make it more clear that they refer to relay files. Signed-off-by:
-
Tom Zanussi authored
Documentation update for creating global buffers. Signed-off-by:
-
Tom Zanussi authored
This patch adds the optional is_global outparam to the create_buf_file() callback. This can be used by clients to create a single global relayfs buffer instead of the default per-cpu buffers. This was suggested as being useful for certain debugging applications where it's more convenient to be able to get all the data from a single channel without having to go to the bother of dealing with per-cpu files. Signed-off-by:
-
Tom Zanussi authored
Documentation update for creating relay files in other filesystems. Signed-off-by:
-
Tom Zanussi authored
This patch adds a couple of callback functions that allow a client to hook into relay_open()/close() and supply the files that will be used to represent the channel buffers; the default implementation if no callbacks are defined is to create the files in relayfs. This is to support the creation and use of relay files in other filesystems such as debugfs, as implied by the fact that relayfs_file_operations are exported. Signed-off-by:
-
Tom Zanussi authored
Documentation update for non-relay files. Signed-off-by:
-
Tom Zanussi authored
Since we're no longer using relayfs_inode_info, remove relayfs_alloc_inode() and relayfs_destroy_inode() along with the relayfs inode cache. Signed-off-by:
-
Tom Zanussi authored
Use inode->u.generic_ip instead of relayfs_inode_info to store pointer to user data. Clients using relayfs_file_create() to create their own files would probably more expect their data to be stored in generic_ip; we also intend in the next set of patches to get rid of relayfs-specific stuff in the file operations, so we might as well do it here. Signed-off-by:
-
Tom Zanussi authored
This patch adds and exports relayfs_remove_file(), for API symmetry (with relayfs_create_file()). Signed-off-by:
-
Tom Zanussi authored
This patch adds a mandatory fileops param to relayfs_create_file() and exports that function so that clients can use it to create files defined by their own set of file operations, in relayfs. The purpose is to allow relayfs applications to create their own set of 'control' files alongside their relay files in relayfs rather than having to create them in /proc or debugfs for instance. relayfs_create_file() is also used by relay_open_buf() to create the relay files for a channel. In this case, a pointer to relayfs_file_operations is passed in, along with a pointer to the buffer associated with the file. Signed-off-by:
-
Tom Zanussi authored
The patch series implementa or fixes 3 things that were specifically requested or suggested by relayfs users: - support for non-relay files (patches 1-6) Currently, the relayfs API only supports the creation of directories (relayfs_create_dir()) and relay files (relay_open()). These patches adds support for non-relay files (relayfs_create_file()). This is so relayfs applications can create 'control files' in relayfs itself rather than in /proc or via a netlink channel, as is currently done in the relay-app examples. Basically what this amounts to is exporting relayfs_create_file() with an additional file_ops param that clients can use to supply file operations for their own special-purpose files in relayfs. - make exported relay file ops useful (patches 7-8) The relayfs relay_file_operations have always been exported, the intent being to make it possible to create relay files in other filesystems such as debugfs. The problem, though, is that currently the file operations are too tightly coupled to relayfs to actually be used for this purpose. This patch fixes that by adding a couple of callback functions that allow a client to hook into relay_open()/close() and supply the files that will be used to represent the channel buffers; the default implementation if no callbacks are defined is to create the files in relayfs. - add an option to create global relay buffer (patches 9-10) The file creation callback also supplies an optional param, is_global, that can be used by clients to create a single global relayfs buffer instead of the default per-cpu buffers. This was suggested as being useful for certain debugging applications where it's more convenient to be able to get all the data from a single channel without having to go to the bother of dealing with per-cpu files. - cleanup, some renaming and Documentation updates (patches 11-12) There were several comments that the use of netlink in the example code was non-intuitive and in fact the whole relay-app business was needlessly confusing. Based on that feedback, the example code has been completely converted over to relayfs control files as supported by this patch, and have also been made completely self-contained. The converted examples along with a couple of new examples that demonstrate using exported relay files can be found in relay-apps tarball: http://prdownloads.sourceforge.net/relayfs/relay-apps-0.9.tar.gz?download This patch: Separate buffer create/destroy from inode create/destroy. We want to be able to associate other data and not just relay buffers with inodes. Buffer create/destroy is moved out of inode.c and into relayfs core code. Signed-off-by:
-
Andrew Morton authored
Unobfsucate this struct member Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Jan Beulich authored
Needed for the Novell kernel debugger and perhaps some per-cpu data on x86_64 in the future. Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
