- 28 Oct, 2005 40 commits
-
-
Jean Delvare authored
Before I go on cleaning up and improving the i2c-viapro driver, let's fix all the coding style issues: mostly trailing white space, and spaces used where tabs should be. Signed-off-by:
Jean Delvare <khali@linux-fr> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Documentation/i2c/busses/i2c-viapro | 12 ++--- drivers/i2c/busses/i2c-viapro.c | 76 ++++++++++++++++++------------------ 2 files changed, 43 insertions(+), 45 deletions(-)
-
Jean Delvare authored
I am taking over the maintenance of the i2c-viapro SMBus driver. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Hideki Iwamoto authored
Fix several errors in I2C SMBus emulation when PEC is used: * Weird logic error in SMBus Write Word transactions. * Wrong buffer size, affecting SMBus Block Write transactions. * Potential buffer overrun in SMBus Block Write transactions. From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp> Signed-off-by:
-
Jean Delvare authored
I noticed a useless instruction in the i2c-amd8111 driver. Signed-off-by:
-
Hideki Iwamoto authored
The i2c_smbus_data union block member has a comment stating that an extra byte is required for SMBus Block Process Call transactions. This has been true for three weeks around June 2002, but no more since, so it is about time that we drop this comment and fix the definition. From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp> Signed-off-by:
-
Hideki Iwamoto authored
Fix the description of I2C_FUNC_PROTOCOL_MANGLING. From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp> Signed-off-by:
-
Jean Delvare authored
Move the check for SMBUS_QUICK in i2c_probe() after the forced addresses have been handled. This makes it possible for a driver to leave the probed address lists empty, only providing forced addresses, and get i2c_probe to work even if the bus doesn't support SMBUS_QUICK. Signed-off-by:
-
Jean Delvare authored
Using s8 instead of u8 to store temperature register values saves a few instructions on sysfs file read. The very same was done for several other drivers a while ago (lm63, lm83, lm90...) Signed-off-by:
-
Jean Delvare authored
Convert the w83l785ts driver to use dynamic sysfs callbacks. This is a small driver so the benefit is thin, but still worth it. Signed-off-by:
-
Jean Delvare authored
Clean up name string usage in 12 i2c bus drivers: * Use the i2c_adapter name for requesting the I/O region rather than redefining a new string. * Do not initialize the i2c_adapter name to "unset". This should save a few data bytes here and there. Signed-off-by:
-
Jean Delvare authored
Discard a common out-of-date comment in 5 hardware monitoring drivers. The hardware monitoring chip drivers are no more setting sensor limits at initialization time, for quite some time already. Signed-off-by:
-
Jean Delvare authored
Kill explicit static initializations to 0 in 2 hwmon drivers. Signed-off-by:
-
Jean Delvare authored
Kill explicit static initializations to 0 in 10 i2c drivers. Signed-off-by:
-
Jean Delvare authored
Do not enable the VIA VT82C686A/B integrated sensors by default, as disabled sensors usually means that this feature is not used so the values won't make any sense. This has been confusing many users in the past: http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052 It is still possible to forcibly enable the sensors by using the force_addr module parameter. Signed-off-by:
-
Jean Delvare authored
This whitespace cleanup patch removes one trailing space and breaks lines longer than 80 characters. Signed-off-by:
Grant Coady <gcoady@gmail.com> Signed-off-by:
-
Jean Delvare authored
We can save 0.5kB of data in the via686a driver. From: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by:
-
Grant Coady authored
hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks, reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1, removing the old driver macro mess. Run tested on Intel SE440BX-2 mobo. Signed-off-by:
-
Grant Coady authored
hwmon: adm9240 update 1/2: cleanups: o remove i2c read/write wrapper interface as it does nothing, o change kmalloc + memset to kzalloc Signed-off-by:
-
Linus Torvalds authored
-
-
Yan Zheng authored
5.1.3. Maximum Response Code The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: If Maximum Response Code < 32768, Maximum Response Delay = Maximum Response Code If Maximum Response Code >=32768, Maximum Response Code represents a floating-point value as follows: 0 1 2 3 4 5 6 7 8 9 A B C D E F +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |1| exp | mant | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Maximum Response Delay = (mant | 0x1000) << (exp+3) 5.1.9. QQIC (Querier's Query Interval Code) The Querier's Query Interval Code field specifies the [Query Interval] used by the Querier. The actual interval, called the Querier's Query Interval (QQI), is represented in units of seconds, and is derived from the Querier's Query Interval Code as follows: If QQIC < 128, QQI = QQIC If QQIC >= 128, QQIC represents a floating-point value as follows: 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ |1| exp | mant | +-+-+-+-+-+-+-+-+ QQI = (mant | 0x10) << (exp + 3) -- rfc3810 #define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value) #define MLDV2_MRC(value) MLDV2_EXP(0x8000, 12, 3, value) Above macro are defined in mcast.c. but 1 << 4 == 0x10 and 1 << 12 == 0x1000. So the result computed by original Macro is larger. Signed-off-by:Yan Zheng <yanzheng@21cn.com> Acked-by:
David L Stevens <dlstevens@us.ibm.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@mandriva.com>
-
Ananda Raju authored
Attached is kernel patch for UDP Fragmentation Offload (UFO) feature. 1. This patch incorporate the review comments by Jeff Garzik. 2. Renamed USO as UFO (UDP Fragmentation Offload) 3. udp sendfile support with UFO This patches uses scatter-gather feature of skb to generate large UDP datagram. Below is a "how-to" on changes required in network device driver to use the UFO interface. UDP Fragmentation Offload (UFO) Interface: ------------------------------------------- UFO is a feature wherein the Linux kernel network stack will offload the IP fragmentation functionality of large UDP datagram to hardware. This will reduce the overhead of stack in fragmenting the large UDP datagram to MTU sized packets 1) Drivers indicate their capability of UFO using dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG NETIF_F_HW_CSUM is required for UFO over ipv6. 2) UFO packet will be submitted for transmission using driver xmit routine. UFO packet will have a non-zero value for "skb_shinfo(skb)->ufo_size" skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP fragment going out of the adapter after IP fragmentation by hardware. skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[] contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW indicating that hardware has to do checksum calculation. Hardware should compute the UDP checksum of complete datagram and also ip header checksum of each fragmented IP packet. For IPV6 the UFO provides the fragment identification-id in skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating IPv6 fragments. Signed-off-by:
Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (forwarded) Signed-off-by:
-
Dave Kleikamp authored
The xtTruncate code was only doing this for leaf pages. When a file is horribly fragmented, we may truncate a file leaving an internal page with an invalid head.next field, which may cause a stale page to be referenced. Signed-off-by:Dave Kleikamp <shaggy@austin.ibm.com>
-
Arnaldo Carvalho de Melo authored
-
Marcel Holtmann authored
If a BPA 100/105 device contains more then one interface then ignore the additional interfaces, because they are unused. Signed-off-by:Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
This patch updates the HCI security filter with support for the Extended Inquiry Response (EIR) feature. Signed-off-by: -
Marcel Holtmann authored
This patch makes another bunch of functions static. Signed-off-by: -
Marcel Holtmann authored
This patch contains the big cleanup of the HCI UART driver. The uneeded header files are removed and their structure declarations are moved into the protocol implementations. Signed-off-by: -
Marcel Holtmann authored
The TXCRC compile option is not really useful and thus change it into a module parameter. Signed-off-by: -
Marcel Holtmann authored
This patch moves rfcomm_crc_table[] into the RFCOMM core, because there is no need to keep it in a separate file. Signed-off-by: -
Greg KH authored
-
-
Takashi Iwai authored
Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Randy Dunlap authored
driver/base: add missing function parameters; eliminate all warnings. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Russell King authored
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Jesper Juhl authored
This is the Documentation/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in example code in Documentation/. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
The 071 release is needed to handle the input changes. Older versions will work properly with module-based systems, but not for users that build input stuff into the kernel. Signed-off-by: -
Ben Dooks authored
There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Dmitry Torokhov authored
Input: remove custom-made hotplug handler Now that all input devices are registered with sysfs we can remove old custom-made hotplug handler and crate a standard one. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Greg Kroah-Hartman authored
This creates symlinks in /sys/class/input/ to the nested class devices to help userspace cope with the nesting. Unfortunatly udev still needs to be updated as it can't handle symlinks properly here :( Signed-off-by:
-
