log_refund() incorrectly assumed that if a transaction had been touched, it
always committed buffers to the incore log. Thus, when you got around to
flushing the log, you would need one more block than you committed, to account
for the header. So it automatically set reserved to 1, which had the effect of
making sdp->sd_log_blks_reserved one greater when you got to gfs2_log_flush().
However, if you don't actually commit anything to the incore log between
flushes, you don't need the header, because you aren't writing anything out.
With this patch, log_refund() only increments reservered to account for the
header if something has been committed since the last flush.
Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

I noticed the gfs2_scand seemed to be taking a lot of CPU,
so in order to cut that down a bit, here is a patch. Firstly
the type of a glock is a constant during its lifetime, so that
its possible to check this without needing locking. I've moved
the (common) case of testing for an inode glock outside of
the glmutex lock.

Also there was a mutex left over from when the glock cache was
master of the inode cache. That isn't required any more so I've
removed that too.

There is probably scope for further speed ups in the future
in this area.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This should clarify the logic in gfs2_releasepage() relating to
error handling as well as making the response to errors a bit
more graceful.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

When there are no locks on a resource, the recover_locks() function fails
to clear the NEW_MASTER flag by going directly to out, missing the line
that clears the flag.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

When a status reply is sent for a lockspace that doesn't yet exist, the
message sequence number from the sender was not being copied into the
reply causing the sender to ignore the reply.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

The down-conversion optimization was resulting in the lkb flags being
cleared because the stub message reply had no flags value set.  Copy the
current flags into the stub message so they'll be copied back into the lkb
as part of processing the fake reply.  Also add an assertion to catch this
error more directly if it exists elsewhere.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Oh, and here's (hopefully) the last of these ua_tmp patches. I think I've
caught all the paths now. Sorry it didn't make the last one.
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch fixes bz#203444 where the LKSB was lost during userland conversion
operations
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Another case where list_del should be list_del_init.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

A list_del should have been a list_del_init in lops.c which was
resulting in incorrect status returns from list_empty().
Signed-off-by: Steven Whitheouse <swhiteho@redhat.com>

Introduce new function dlm_dump_rsb() to call within assertions instead of
dlm_print_rsb().  The new function dumps info about all locks on the rsb
in addition to rsb details.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This fixes a memory leak of struct gfs2_bufdata and also some
problems in the ordered write handling code. It needs a bit
more testing, but I believe that the reference counting of
ordered write buffers should now be correct.

This is aimed at fixing Red Hat bugzilla: #201028 and #201082
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Doing the kmap() while holding the spinlock was causing recursive spinlock
problems.  It seems the kmap was scheduling, although there was no warning
as I'd expect.  Patrick, do we need locking around the kmap?
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

recovery.c add a brelse to deal with gfs2_replay_read_block being called
twice on the same block.

add a dput to drop the ref count on the root inode.
This was causing lingering glocks and thus causing
a mount failure to hang.

Fix a endian conversion macro that was was swizzling
16bits when it should have been swizzling 32.
Signed-off-by: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

When recoveries are aborted by other recoveries we can get replies to
status or names requests that we've given up on.  This can cause problems
if we're making another request and receive an old reply.  Add a sequence
number to status/names requests and reject replies that don't match.  A
field already exists for the seq number that's used in other message
types.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

To aid debugging, it's useful to be able to see what nodeid the dlm is
waiting on for a message reply.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

When the debug buffer has filled up, break from the loop and return the
correct number of bytes that have been written.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

When we abort one recovery to do another, break out of the ping_members()
routine more quickly, and wake up the dlm_recoverd thread more quickly
instead of waiting for it to time out.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Print the violating name length in the assertion.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

In some cases we can enter write page without there being buffers
attached to the page. In this case the function to add gfs2_bufdata
to the buffers fails sliently causing further failures down the
stack.

This fix ensures that we always add buffers in writepage if they
didn't already exist (mmap is one way to trigger this).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch fixes the userland DLM unlock code so that it correctly returns the
address of the userland lock status block in its completion AST.

It fixes bug #201348

Patrick
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

The previous patch didn't change all the gfs_ to gfs2_ so
this is the remainder.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

When the result of a posix lock request is read it needs to be matched up
with the correct waiting request.  The owner field needs to be used in the
comparison since more than one process may be waiting for locks on the
same file.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Use the gfs2_ prefix on the register/unregister functions for the lock
modules.  The gfs_ prefix was left from an old idea on how to share these
with gfs1.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: ati_remote - use msec instead of jiffies
  Input: ati_remote - add missing input_sync()
  Input: ati_remote - relax permissions sysfs module parameters
  Input: ati_remote - make filter time a module parameter
  Input: atkbd - restore repeat rate when resuming
  Input: trackpoint - activate protocol when resuming
  Input: logips2pp - fix button mapping for MX300
  Input: keyboard - change to use kzalloc
  Input: serio/gameport - check whether driver core calls succeeded
  Input: spaceball - make 4000FLX Lefty work
  Input: keyboard - simplify emulate_raw() implementation
  Input: keyboard - remove static variable and clean up initialization
  Input: hiddev - use standard list implementation
  Input: add missing handler->start() call
  Input: HID - fix potential out-of-bound array access
  Input: fix list iteration in input_release_device()
  Input: iforce - add Trust Force Feedback Race Master support
  Input: iforce - check array bounds before accessing elements
  Input: libps2 - warn instead of oopsing when passed bad arguments
  Input: fm801-gp - fix use after free
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] Don't reject O_RDWR at opening PCM OSS with read/write-only device
  [ALSA] snd-emu10k1: Implement support for Audigy 2 ZS [SB0353]
  [ALSA] add MAINTAINERS entry for snd-aoa
  [ALSA] aoa: platform function gpio: ignore errors from functions that don't exist
  [ALSA] make snd-powermac load even when it can't bind the device
  [ALSA] aoa: fix toonie codec
  [ALSA] aoa: feature gpio layer: fix IRQ access
  [ALSA] Conversions from kmalloc+memset to k(z|c)alloc
  [ALSA] snd-emu10k1: Fixes ALSA bug#2190

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [LAPB]: Fix windowsize check
  [TCP]: Fixes IW > 2 cases when TCP is application limited
  [PKT_SCHED] RED: Fix overflow in calculation of queue average
  [LLX]: SOCK_DGRAM interface fixes
  [PKT_SCHED]: Return ENOENT if qdisc module is unavailable
  [BRIDGE]: netlink status fix

While busy-waiting for completion, check the hardware after scheduling;
don't schedule and then immediately check the _timeout_.  If the yield()
took a long time (as it does on my OLPC prototype board when it's busy),
we'd report a timeout even though the hardware was now ready.

This fixes it, and also switches the yield() for a cond_resched() because
we don't actually want to be _that_ nice about it.  I see nice
tightly-packed SMBus transactions now, rather than waiting for milliseconds
between successive phases.

Actually, we shouldn't be busy-waiting here at all.  We should be using
interrupts.  That's an exercise for another day though.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Christer Weinigel <wingel@nano-system.com>
Cc: <Jordan.Crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I saw an oops down this path when trying to create a new file on a UDF
filesystem which was internally marked as readonly, but mounted rw:

udf_create
        udf_new_inode
                new_inode
                        alloc_inode
                        	udf_alloc_inode
                udf_new_block
                        returns EIO due to readonlyness
                iput (on error)
                        udf_put_inode
                                udf_discard_prealloc
                                        udf_next_aext
                                                udf_current_aext
                                                        udf_get_fileshortad
                                                                OOPS

the udf_discard_prealloc() path was examining uninitialized fields of the
udf inode.

udf_discard_prealloc() already has this code to short-circuit the discard
path if no extents are preallocated:

        if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB ||
                inode->i_size == UDF_I_LENEXTENTS(inode))
        {
                return;
        }

so if we initialize UDF_I_LENEXTENTS(inode) = 0 earlier in udf_new_inode,
we won't try to free the (not) preallocated blocks, since this will match
the i_size = 0 set when the inode was initialized.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The recent fixups in futex.c need to be applied to futex_compat.c too.  Fixes
a hang reported by Olaf.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A patch in -mm kernel correct the parsing of "address resources" of pnpacpi.
Before we assumed it was memory only, but it could be also IO.

But this change show an hidden bug : some resources could be producer type
that are not handled by pnp layer.  So we should ignore the producer
resources.

This patch fixes bug 6292 (http://bugzilla.kernel.org/show_bug.cgi?id=6292).
Some devices like PNP0A03 have 0xd00-0xffff and 0x0-0xcf7 as IO producer
resources.

Before correcting "address resources" parsing, it was seen as memory and was
harmless, because nobody tried to reserve this memory range as it should be
IO.

With the correction it become IO resources, and make failed all others device
that want to register IO in this range and use pnp layer (like a ISA sound
card).

The solution is to ignore producer resources
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: "Brown, Len" <len.brown@intel.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

reiserfs_write_full_page does zero bytes in the file past eof, but it may
call get_block on those buffers as well.  On machines where the page size
is larger than the blocksize, this can result in mmaped files incorrectly
growing up to a block boundary during writepage.

The fix is to avoid calling get_block for any blocks that are entirely past
eof
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The correct lock ordering is inode lock -> BKL
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch is for collision check enhancement for memory hot add.

It's better to do resouce collision check before doing memory hot add,
which will touch memory management structures.

And add_section() should check section exists or not before calling
sparse_add_one_section(). (sparse_add_one_section() will do another
check anyway. but checking in memory_hotplug.c will be easy to understand.)
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: keith mannthey <kmannth@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

both of acpi_memory_enable_device() and acpi_memory_add_device() may evaluate
_CRS method.

We should avoid evaluate device's resource twice if we could get it
successfully in past.
Signed-off-by: KAMEZWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

add_memory() does all necessary check to avoid collision.  then, acpi layer
doesn't have to check region by itself.

(*) pfn_valid() just returns page struct is valid or not. It returns 0
    if a section has been already added even is ioresource is not added.
    ioresource collision check in mm/memory_hotplug.c can do more precise
    collistion check.
    added enabled bit check just for sanity check..
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

find_next_system_ram() is used to find available memory resource at onlining
newly added memory.  This patch fixes following problem.

find_next_system_ram() cannot catch this case.

Resource:      (start)-------------(end)
Section :                (start)-------------(end)
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

find_next_system_ram() returns valid memory range which meets requested area,
only used by memory-hot-add.

This function always rewrite requested resource even if returned area is not
fully fit in requested one.  And sometimes the returnd resource is larger than
requested area.  This annoyes the caller.  This patch changes the returned
value to fit in requested area.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>