- 11 May, 2007 40 commits
-
-
Dan Williams authored
made debugfs.c sparse-clean, found an unused function that way Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Remove the static definition of SUPPORT_BOOT_COMMAND. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Use standard IW_MODE_* constants instead. Signed-off-by:
-
Dan Williams authored
Also change WEPstatus to "wep_enabled"; it's clearer and consistent with the WPAenabled and WPA2enabled members. Signed-off-by:
-
Dan Williams authored
Remove WLAN_802_11_AUTHENTICATION_MODE enum and use IW_AUTH_ALG_* instead. Signed-off-by:
-
Dan Williams authored
Obsoleted by SIOCSIWGENIE. Signed-off-by:
-
Dan Williams authored
Remove setencryptionmode private ioctl and Encryptionmode variable. Mostly unused, and its functionality is provided by other internal members like WEPstatus, WPAenabled, WPA2enabled, and SIOCSIWGENIE. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Obsoleted by SIOCSIWAUTH's IW_AUTH_80211_AUTH_ALG option introduced by WE-18. Signed-off-by:
-
Dan Williams authored
Useless; it set an internal variable that was unused anyway. A supplicant handles all 802.1x authentication, not the driver. Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Start to normalize bss_descriptor with ieee80211_network so we can eventually replace bss_descriptor more easily. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: further UTF-8 fixes and name correction Fix wrong identifier name in Documentation/kref.txt
-
David Woodhouse authored
> -** Copyright 1994 by Bj<94>rn Brauel > +** Copyright 1994 by Bj”rn Brauel I think these were cp437, and it should read 'Björn'. (asm-m68k/atari*.h) Also note that Arnaldo just put more legacy noise into CREDITS... Signed-off-by:Adrian Bunk <bunk@stusta.de>
-
Satyam Sharma authored
There's a typo / wrong identifier name in Documentation/kref.txt. Fix it. Signed-off-by:
Satyam Sharma <ssatyam@cse.iitk.ac.in> Acked-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
git://ftp.linux-mips.org/pub/scm/upstream-ip22Linus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-ip22: Convert SGI IP22 and specific drivers to platform_device.
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits) [MIPS] Rework cobalt_board_id [MIPS] Use RTC_CMOS for Cobalt [MIPS] Use platform_device for Cobalt UART [MIPS] Separate Alchemy processor based boards config [MIPS] Fix build error in atomic64_cmpxchg [MIPS] Run checksyscalls for N32 and O32 ABI [MIPS] tlbex: use __maybe_unused [MIPS] excite: use __maybe_unused [MIPS] Add extern cobalt_board_id [MIPS] Remove unused CONFIG_TOSHIBA_BOARDS [MIPS] Rename tb0229_defconfig to tb0219_defconfig [MIPS] Update tb0229_defconfig; add CONFIG_GPIO_TB0219. [MIPS] Add minimum defconfig for RBHMA4200 [MIPS] SB1: Build fix. [MIPS] Drop __devinit tag from allocate_irqno() and free_irqno() [MIPS] clocksource: use CLOCKSOURCE_MASK() macro [MIPS] Remove LIMITED_DMA support [MIPS] Remove Momenco Jaguar ATX support [MIPS] Remove Momenco Ocelot G support [MIPS] FPU hazard handling ...
-
git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: Fix compile/link of init/do_mounts.c with !CONFIG_BLOCK When stacked block devices are in-use (e.g. md or dm), the recursive calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* 'audit.b38' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] Abnormal End of Processes [PATCH] match audit name data [PATCH] complete message queue auditing [PATCH] audit inode for all xattr syscalls [PATCH] initialize name osid [PATCH] audit signal recipients [PATCH] add SIGNAL syscall class (v3) [PATCH] auditing ptrace
-
Linus Torvalds authored
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: USB HID: hiddev - fix race between hiddev_send_event() and hiddev_release() HID: add hooks for getkeycode() and setkeycode() methods HID: switch to using input_dev->dev.parent USB HID: Logitech wheel 0x046d/0xc294 needs HID_QUIRK_NOGET quirk USB HID: usb_buffer_free() cleanup USB HID: report descriptor of Cypress USB barcode readers needs fixup Bluetooth HID: HIDP - don't initialize force feedback USB HID: update CONFIG_USB_HIDINPUT_POWERBOOK description HID: add input mappings for non-working keys on Logitech S510 remote
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) [NETFILTER]: xt_conntrack: add compat support [NETFILTER]: iptable_raw: ignore short packets sent by SOCK_RAW sockets [NETFILTER]: iptable_{filter,mangle}: more descriptive "happy cracking" message [NETFILTER]: nf_nat: Clears helper private area when NATing [NETFILTER]: ctnetlink: clear helper area and handle unchanged helper [NETFILTER]: nf_conntrack: Removes unused destroy operation of l3proto [NETFILTER]: nf_conntrack: Removes duplicated declarations [NETFILTER]: nf_nat: remove unused argument of function allocating binding [NETFILTER]: Clean up table initialization [NET_SCHED]: Avoid requeue warning on dev_deactivate [NET_SCHED]: Reread dev->qdisc for NETDEV_TX_OK [NET_SCHED]: Rationalise return value of qdisc_restart [NET]: Fix dev->qdisc race for NETDEV_TX_LOCKED case [UDP]: Fix AF-specific references in AF-agnostic code. [IrDA]: KingSun/DonShine USB IrDA dongle support. [IPV6] ROUTE: Assign rt6i_idev for ip6_{prohibit,blk_hole}_entry. [IPV6]: Do no rely on skb->dst before it is assigned. [IPV6]: Send ICMPv6 error on scope violations. [SCTP]: Do not include ABORT chunk header in the notification. [SCTP]: Correctly copy addresses in sctp_copy_laddrs ... -
Kenichi Nagai authored
When exporting input device bitmaps via compat_ioctl on BIG_ENDIAN platforms evdev calculates data size incorrectly. This causes buffer overflow if user specifies buffer smaller than maxlen. Signed-off-by:
Kenichi Nagai <kenichi3.nagai@toshiba.co.jp> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
NeilBrown authored
During a 'resync' or similar activity, md checks if the devices in the array are otherwise active and winds back resync activity when they are. This test in done in is_mddev_idle, and it is somewhat fragile - it sometimes thinks there is non-sync io when there isn't. The test compares the total sectors of io (disk_stat_read) with the sectors of resync io (disk->sync_io). This has problems because total sectors gets updated when a request completes, while resync io gets updated when the request is submitted. The time difference can cause large differenced between the two which do not actually imply non-resync activity. The test currently allows for some fuzz (+/- 4096) but there are some cases when it is not enough. The test currently looks for any (non-fuzz) difference, either positive or negative. This clearly is not needed. Any non-sync activity will cause the total sectors to grow faster than the sync_io count (never slower) so we only need to look for a positive differences. If we do this then the amount of in-flight sync io will never cause the appearance of non-sync IO. Once enough non-sync IO to worry about starts happening, resync will be slowed down and the measurements will thus be more precise (as there is less in-flight) and control of resync will still be suitably responsive. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Robert P. J. Day authored
Remove the obsolete "if [ ]" construct from the video console Kconfig file. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
Convert internal wait_pm2() function to fb API fb_sync() method. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Jean Delvare authored
Let the user enable debugging messages in nvidiafb. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Fix rivafb's I2C getscl callback function, as was done in nvidiafb recently. Signed-off-by:
-
Nicolas Ferre authored
Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms. Those chips share quite the same IP and this code is suitable for both architectures. Signed-off-by:
Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by:
-
Krzysztof Helt authored
This is a basic port from 2.4 kernel to 2.6. Acceleration is lost and big endian support probably too. The driver works in 8, 16 and 32 bit mode. [adaplas] - change VESA_* to FB_BLANK_* constants - removed unused function clear_memory - fix uninitialized variable compiler warning - some whitespace cleaning [akpm@linux-foundation.org: Nuke pestiferous CVS string] Signed-off-by:
-
Michal Piotrowski authored
ups... coding style. Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Davide Libenzi authored
Re-arrange epoll code to avoid static functions pre-declarations, and apply akpm-filter on it. Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Signed-off-by:
-
Davide Libenzi authored
Epoll is either compiled it, or not (if EMBEDDED). Remove the module code and use fs_initcall(). Signed-off-by:
-
Davide Libenzi authored
Cut out lots of code from epoll, by reusing the anonymous inode source patch (fs/anon_inodes.c). Signed-off-by:
-
Davide Libenzi authored
This is an example about how to add eventfd support to the current KAIO code, in order to enable KAIO to post readiness events to a pollable fd (hence compatible with POSIX select/poll). The KAIO code simply signals the eventfd fd when events are ready, and this triggers a POLLIN in the fd. This patch uses a reserved for future use member of the struct iocb to pass an eventfd file descriptor, that KAIO will use to post events every time a request completes. At that point, an aio_getevents() will return the completed result to a struct io_event. I made a quick test program to verify the patch, and it runs fine here: http://www.xmailserver.org/eventfd-aio-test.c The test program uses poll(2), but it'd, of course, work with select and epoll too. This can allow to schedule both block I/O and other poll-able devices requests, and wait for results using select/poll/epoll. In a typical scenario, an application would submit KAIO request using aio_submit(), and will also use epoll_ctl() on the whole other class of devices (that with the addition of signals, timers and user events, now it's pretty much complete), and then would: epoll_wait(...); for_each_event { if (curr_event_is_kaiofd) { aio_getevents(); dispatch_aio_events(); } else { dispatch_epoll_event(); } } Signed-off-by:
-
Davide Libenzi authored
This patch wires the eventfd system call to the x86 architectures. Signed-off-by:
-
