- 25 Mar, 2006 40 commits
-
-
Alexander Zarochentsev authored
Use the new balance_dirty_pages_ratelimited_nr in reiserfs "largeio" file write. Signed-off-by:
Hans Reiser <reiser@namesys.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
We presently ignore the return values from initcalls. But that can carry useful debugging information. So print it out if it's non-zero. It turns out the -ENODEV happens quite a lot, due to built-in drivers which have no hardware to drive. So suppress that unless initcall_debug was specified. Also make the warning message more friendly by printing the name of the initcall function. Also drop the KERN_DEBUG from the initcall_debug message. If we specified inticall_debug then we obviously want to see the messages. Acked-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Vladimir V. Saveliev authored
Clean up several places where gcc issues warnings when -W is specified. Thanks to Neil for finding that. Signed-off-by:
Vladimir V. Saveliev <vs@namesys.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
Rene Herman authored
Today I wondered about /dev/parport<n> after not seeing anything in drivers/parport register char-major-99. Having PP_MAJOR in include/linux/major.h would've allowed me to more quickly determine that it was the ppdev driver driving these. Signed-off-by:
-
Sam Ravnborg authored
In latest -mm a number of section mismatch warnings are generated for floppy.o like the following: WARNING: drivers/block/floppy.o - Section mismatch: reference to \ .init.data: from .text between 'init_module' (at offset 0x6976) and \ 'cleanup_module' The warning are caused by a reference to floppy_init() which is __init from init_module() which is not declared __init. Declaring init_module() _init fixes this. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Sam Ravnborg authored
In latest -mm ide-code.o gave a number of warnings like the following: WARNING: drivers/ide/ide-core.o - Section mismatch: reference to \ .init.text: from .text between 'init_module' (at offset 0x1f97) and \ 'cleanup_module' The warning was caused by init_module() calling parse_option() and ide_init() both declared __init. Declaring init_module() __init fixes the warnings. Signed-off-by:
-
Nick Piggin authored
Previous inotify work avoidance is good when inotify is completely unused, but it breaks down if even a single watch is in place anywhere in the system. Robin Holt notices that udev is one such culprit - it slows down a 512-thread application on a 512 CPU system from 6 seconds to 22 minutes. Solve this by adding a flag in the dentry that tells inotify whether or not its parent inode has a watch on it. Event queueing to parent will skip taking locks if this flag is cleared. Setting and clearing of this flag on all child dentries versus event delivery: this is no in terms of race cases, and that was shown to be equivalent to always performing the check. The essential behaviour is that activity occuring _after_ a watch has been added and _before_ it has been removed, will generate events. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Robert Love <rml@novell.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Signed-off-by:
-
Andrew Morton authored
sysrq.c is fairly revolting. Fix. Signed-off-by:
-
Jesper Juhl authored
net/rxrpc/main.c: In function `rxrpc_initialise': net/rxrpc/main.c:83: warning: label `error_proc' defined but not used Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrey Borzenkov authored
Some BIOSes do not always set CF on error before return from int13. The patch adds additional check for status being zero (AH == 0). Signed-off-by:
Andrey Borzenkov <arvidjaar@mail.ru> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
Adrian Bunk authored
param_array() in kernel/params.c can now become static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Rusty Russell authored
MODULE_PARM was actually breaking: recent gcc version optimize them out as unused. It's time to replace the last users, which are generally in the most unloved drivers anyway. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Andrew Morton authored
hysdn defines its own types: ulong, uint, uchar and word. Problem is, the module_param macros rely upon some of those identifiers having special meanings too. The net effect is that module_param() and friends cannot be used in ISDN because of this namespace clash. So remove the hysdn-private defines and open-code them all. Cc: Karsten Keil <kkeil@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Adrian Bunk authored
If we can detect a problem at compile time, the compilation should fail. Signed-off-by:
-
Thomas Koeller authored
Add a couple of 'const' qualifiers to the TTY flip buffer APIs, where appropriate. Signed-off-by:
Thomas Koeller <thomas@koeller.dyndns.org> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Jesper Juhl authored
drivers/isdn/i4l/isdn_ppp.c:785: warning: ignoring return value of `copy_to_user', declared with attribute warn_unused_result Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Oleg Drokin authored
I think it would be nice to put an usage warning in header of lookup_instantiate_filp() to indicate it is unsafe to use it on anything but regular files (even that is potentially unsafe, but there your ->open() is usually in your hands anyway), so that others won't fall into the same trap I did. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
-
Oleg Drokin authored
Introduce FMODE_EXEC file flag, to indicate that file is being opened for execution. This is useful for distributed filesystems to maintain consistent behavior for returning ETXTBUSY when opening for write and execution happens on different nodes. akpm: Needed by Lustre at present. I assume their objective to to work towards being able to install Lustre on an unmodified distro kernel, which seems sane. It should have zero runtime cost. Trond and Chuck indicate that NFS4 can probably use this too, for the same thing. Steven says it's also on the GFS todo list. Signed-off-by:
-
Jeff Mahoney authored
When an error occurs in reiserfs_file_write before any data is written, and O_SYNC is set, the return code of generic_osync_write will overwrite the error code, losing it. This patch ensures that generic_osync_inode() doesn't run under an error condition, losing the error. This duplicates the logic from generic_file_buffered_write(). Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Alexander Zarochentsev <zam@namesys.com> Signed-off-by:
-
Alexander Zarochentsev authored
Reiserfs does not handle transaction ID overflow correctly. Transaction ID == 0 causes reiserfs to crash. The patch fixes all places where the transaction ID is incremented. Signed-off-by:
Alexander Zarochentsev <zam@namesys.com> Signed-off-by:
-
Alexander Zarochentzev authored
This patch fixes a bug in reiserfs truncate. A transaction might overflow when truncating long highly fragmented file. The fix is to split truncation into several transactions to avoid overflowing. Signed-off-by:
-
Adrian Bunk authored
There's no reason for iprune_mutex being global. Signed-off-by:
-
Jan Kara authored
Remove unused quota flag. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Oleg Drokin authored
It seems there is error check missing in open_namei for errors returned through intent.open.file (from lookup_instantiate_filp). If there is plain open performed, then such a check done inside __path_lookup_intent_open called from path_lookup_open(), but when the open is performed with O_CREAT flag set, then __path_lookup_intent_open is only called with LOOKUP_PARENT set where no file opening can occur yet. Later on lookup_hash is called where exact opening might take place and intent.open.file may be filled. If it is filled with error value of some sort, then we get kernel attempting to dereference this error value as address (and corresponding oops) in nameidata_to_filp() called from filp_open(). While this is relatively simple to workaround in ->lookup() method by just checking lookup_instantiate_filp() return value and returning error as needed, this is not so easy in ->d_revalidate(), where we can only return "yes, dentry is valid" or "no, dentry is invalid, perform full lookup again", and just returning 0 on error would cause extra lookup (with potential extra costly RPCs). So in short, I believe that there should be no difference in error handling for opening a file and creating a file in open_namei() and propose this simple patch as a solution. Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
-
Andrew Morton authored
The kjournald timer is currently on the kernel thread's stack and the journal structure points at it. Save a pointer hop by moving the timer into the journal structure. Signed-off-by:
-
David Howells authored
Cause an attempt to add a duplicate non-updateable key (such as a keyring) to a keyring to discard the extant copy in favour of the new one rather than failing with EEXIST: # do the test in an empty session keyctl session # create a new keyring called "a" and attach to session keyctl newring a @s # create another new keyring called "a" and attach to session, # displacing the keyring added by the second command: keyctl newring a @s Without this patch, the third command will fail. For updateable keys (such as those of "user" type), the update method will still be called rather than a new key being created. Signed-off-by:
-
David Howells authored
Make key quota detection generate an error if either quota is exceeded rather than only if both quotas are exceeded. Signed-off-by:
-
Chen, Kenneth W authored
DEBUG_PAGEALLOC is not compatible with hugetlb page support. That debug option turns off PSE. Once it is turned off in CR4, the cpu will ignore pse bit in the pmd and causing infinite page-not- present faults. So disable DEBUG_PAGEALLOC if the user selected hugetlbfs. Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Cc: <stable@kernel.org> Signed-off-by:
-
Ashok Raj authored
Make CONFIG_HOTPLUG_CPU depend on !X86_PC, so we need to turn on either CONFIG_GENERICARCH, CONFIG_BIGSMP or any other subarch except X86_PC when CONFIG_HOTPLUG_CPU=y With 2.6.15+ kernels when CONFIG_HOTPLUG_CPU is turned on we switch to bigsmp mode for sending IPI's and ioapic configurations that caused the following error message. >> More than 8 CPUs detected and CONFIG_X86_PC cannot handle it. >> Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP. Originally bigsmp was added just to handle >8 cpus, but now with hotplug cpu support we need to use bigsmp mode (why? see below), that cause the above error message even if there were less than 8 cpus in the system. The message is bogus, but we are cannot use logical flat mode due to issues with broadcast IPI can confuse a CPU just comming up. We use flat physical mode just like x86_64 case. More details on why bigsmp now uses flat physical mode (vs. cluster mode) in following link. http://marc.theaimsgroup.com/?l=linux-kernel&m=113261865814107&w=2Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
-
Anton Blanchard authored
In zone_pcp_init we print out all zones even if they are empty: On node 0 totalpages: 245760 DMA zone: 245760 pages, LIFO batch:31 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 To conserve dmesg space why not print only the non zero zones. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Christoph Lameter authored
The page migration code could function without NUMA but we currently have no users for the non-NUMA case. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Christoph Lameter authored
We have had this memory leak for a while now. The situation is complicated by the use of alloc_kmemlist() as a function to resize various caches by do_tune_cpucache(). What we do here is first of all make sure that we deallocate properly in the loop over all the nodes. If we are just resizing caches then we can simply return with -ENOMEM if an allocation fails. If the cache is new then we need to rollback and remove all earlier allocations. We detect that a cache is new by checking if the link to the global cache chain has been setup. This is a bit hackish .... (also fix up too overlong lines that I added in the last patch...) Signed-off-by:
-
Christoph Lameter authored
Inspired by Jesper Juhl's patch from today 1. Get rid of err We do not set it to anything else but zero. 2. Drop the CONFIG_NUMA stuff. There are definitions for alloc_alien_cache and free_alien_cache() that do the right thing for the non NUMA case. 3. Better naming of variables. 4. Remove redundant cachep->nodelists[node] expressions. Signed-off-by:
-
Christoph Lameter authored
__drain_alien_cache() currently drains objects by freeing them to the (remote) freelists of the original node. However, each node also has a shared list containing objects to be used on any processor of that node. We can avoid a number of remote node accesses by copying the pointers to the free objects directly into the remote shared array. And while we are at it: Skip alien draining if the alien cache spinlock is already taken. Kiran reported that this is a performance benefit. Signed-off-by:
-
Christoph Lameter authored
slabr_objects() can be used to transfer objects between various object caches of the slab allocator. It is currently only used during __cache_alloc() to retrieve elements from the shared array. We will be using it soon to transfer elements from the alien caches to the remote shared array. Signed-off-by:
-
Pekka Enberg authored
Convert mm/ to use the new kmem_cache_zalloc allocator. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Pekka Enberg authored
As suggested by Eric Dumazet, optimize kzalloc() calls that pass a compile-time constant size. Please note that the patch increases kernel text slightly (~200 bytes for defconfig on x86). Signed-off-by:
-
Pekka Enberg authored
Introduce a memory-zeroing variant of kmem_cache_alloc. The allocator already exits in XFS and there are potential users for it so this patch makes the allocator available for the general public. Signed-off-by:
-
Al Viro authored
Implement /proc/slab_allocators. It produces output like: idr_layer_cache: 80 idr_pre_get+0x33/0x4e buffer_head: 2555 alloc_buffer_head+0x20/0x75 mm_struct: 9 mm_alloc+0x1e/0x42 mm_struct: 20 dup_mm+0x36/0x370 vm_area_struct: 384 dup_mm+0x18f/0x370 vm_area_struct: 151 do_mmap_pgoff+0x2e0/0x7c3 vm_area_struct: 1 split_vma+0x5a/0x10e vm_area_struct: 11 do_brk+0x206/0x2e2 vm_area_struct: 2 copy_vma+0xda/0x142 vm_area_struct: 9 setup_arg_pages+0x99/0x214 fs_cache: 8 copy_fs_struct+0x21/0x133 fs_cache: 29 copy_process+0xf38/0x10e3 files_cache: 30 alloc_files+0x1b/0xcf signal_cache: 81 copy_process+0xbaa/0x10e3 sighand_cache: 77 copy_process+0xe65/0x10e3 sighand_cache: 1 de_thread+0x4d/0x5f8 anon_vma: 241 anon_vma_prepare+0xd9/0xf3 size-2048: 1 add_sect_attrs+0x5f/0x145 size-2048: 2 journal_init_revoke+0x99/0x302 size-2048: 2 journal_init_revoke+0x137/0x302 size-2048: 2 journal_init_inode+0xf9/0x1c4 Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexander Nyberg <alexn@telia.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> DESC slab-leaks3-locking-fix EDESC From: Andrew Morton <akpm@osdl.org> Update for slab-remove-cachep-spinlock.patch Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexander Nyberg <alexn@telia.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
-
