- 18 Jul, 2007 39 commits
-
-
Aapo Tahkola authored
Spotted by Jeremy Nysen. Signed-off-by:
Aapo Tahkola <aet@rasterburn.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Aapo Tahkola authored
Signed-off-by:
-
Daniel Gimpelevich authored
Signed-off-by:
Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Dmitry Torokhov authored
Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Dmitry Torokhov authored
Signed-off-by:
-
Dmitry Torokhov authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Some macros were using very weird names, like PAL/L (this std doesn't exist). Fixing it. Signed-off-by: -
Akinobu Mita authored
This patch fixes several return value related problems in zr364xx. - return -ENOMEM instead of -ENODEV on out of memory - zr364xx checks video_register_device() error only when its return value is -1. But video_register_device() doesn't always return -1 on error. - If usb_register() returns error, module_init() wrongly returns 1: retval = usb_register(&zr364xx_driver) < 0; ... return retval; And it allows the module to be loaded. Because sys_init_module() doesn't see positive return value as error. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Antoine Jacquet <royale@zerezo.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Oliver Endriss authored
Add support for Satelco EasyWatch PCI DVB-S card (subsystem 0x1894:0x001b). Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Michael Krufky authored
Now that dvb-pll is being used properly in all cx88-dvb instances, the cx88 driver no longer needs to store pll_desc nor pll_addr. Signed-off-by:
-
Trent Piepho authored
Enhance the dvb-pll definition of the fmd1216 tuner by adding an init sequence and a sleep sequence. The init sequence sets the AGC control register to 0xa0, selecting the fast time constant and 112 dBuV take-over point. This the recommended value for DVB-T operation. The sleep sequence sets bit P4 (which is believed to turn the analog demodulator on), turns off the tuning voltage, and sets the AGC control register to 0x60 (external AGC voltage, the recommended value for analog operation). The existing dvb-pll users in the cx88 driver, listed below, will gain these init and sleep sequences. CX88_BOARD_HAUPPAUGE_HVR1100 Hauppauge WinTV-HVR1100 DVB-T/Hybrid CX88_BOARD_HAUPPAUGE_HVR1100LP Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profi CX88_BOARD_WINFAST_DTV2000H WinFast DTV2000 H CX88_BOARD_HAUPPAUGE_HVR3000 Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DV CX88_BOARD_HAUPPAUGE_HVR1300 Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encod This non-dvb-pll user in the cx88 driver should only gain the sleep sequence, as it already had an equivalent init sequence. The non-dvb-pll code for this user is removed. X88_BOARD_DNTV_LIVE_DVB_T_PRO digitalnow DNTV Live! DVB-T Pro In these saa7134 driver, these non-dvb-pll users are converted to use dvb-pll: SAA7134_BOARD_MD7134 Medion 7134 SAA7134_BOARD_ASUS_EUROPA2_HYBRID Asus Europa2 OEM The saa7134 functions philips_fmd1216_tuner_init(), philips_fmd1216_tuner_sleep(), and philips_fmd1216_tuner_set_params() are deleted and the dvb-pll versions are used. This should result in equivalent sleep, init, and tuning sequences being sent to the tuner. For the cxusb driver, only one board is effected: USB_PID_MEDION_MD95700 Medion MD95700 This board used dvb_usb_tuner_init_i2c() and dvb_usb_tuner_set_params_i2c() for init and tuning, respectively. These functions are effectively the same as the dvb-pll versions. They call a tuner pass control function defined at the dvb-usb level, but this does not matter, as this card does not have a tuner pass control function (only the dib3000mb does). This board will gain the sleep sequence, while init and tuning should be unchanged. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Aapo Tahkola authored
Support for A-LINK DTU(m) is not included in this patch. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Luca Olivetti authored
Marked af9005 driver as experimental and add dependency for qt1010; Added a dependency on qt1010 in Kconfig; Corrected the experimental gain reduction of the mt2060 in case of strong signal (though it is code included in #ifdef 0). Signed-off-by:
Luca Olivetti <luca@ventoso.org> Signed-off-by:
-
Luca Olivetti authored
Signed-off-by:
Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Michael Krufky authored
convert calls to dib3000mb_attach to use dvb_attach Signed-off-by:
-
Michael Krufky authored
moved tda665x pll_init into dvb_pll_desc dvb_pll_tda665x.initdata convert handling of tda665x and tua6010xs to properly use dvb-pll Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
These sources do not need to #include "dvb-pll.h" Signed-off-by:
-
Tony Wan authored
Using Encore's key codes, we needn't add any additional key table. Signed-off-by:
Tony Wan <wankai@sjtu.org> Signed-off-by:
-
Tony Wan authored
Support the 10moons TM300 TV card (so called TV Master 3), which is a 10moons saa7130 based board. Here not include features for the IR-remote. It has been tested using TVTIME. The card was auto-detected and all the input sources worked correct with sound. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Thierry MERLE authored
The ioctl entry point, a big switch/case, is splitted in little functions. These functions are set as callbacks for the video_ioctl2 video4linux facility. This improves the driver memory consumption and enables the v4l1 compatibility as a side effect. Signed-off-by:
Thierry MERLE <thierry.merle@free.fr> Acked-by:
Dwaine P. Garden <dwainegarden@rogers.com> Signed-off-by:
-
Thierry MERLE authored
Radio and video ioctls are the same, delete the usbvision_do_radio_ioctl function add the special cases for radio in usbvision_v4l2_do_ioctl Signed-off-by:
-
David Warman authored
usbvision_set_video_format: add comment that VO_MODE is also being set. Signed-off-by:
David Warman <dwarman@davidwarman.net> Signed-off-by:
-
David Warman authored
Signed-off-by:
-
Michael Krufky authored
removed philips_sd1878_tda8261_tuner_set_params, using dvb_pll_attach, instead. Signed-off-by:
-
Michael Krufky authored
removed mt352_aver777_tuner_calc_regs, using dvb_pll_attach, instead. Signed-off-by:
-
Michael Krufky authored
This patch removes duplicate code from cx88-dvb and saa7134-dvb that handles rf input switching for the TUV1236d tuner. The functionality is added to dvb-pll, where all the other code that handles the TUV1236d is kept. Signed-off-by:
-
Michael Krufky authored
Rename dvb_pll_desc.setbw() to set(), and accept struct dvb_frontend_parameters instead of passing both freq and bandwidth, so that this may be used as a generic function. In order to do this, dvb_pll_configure must also be altered in the same manner, to take struct dvb_frontend_parameters instead of freq and bandwidth. Signed-off-by:
-
Simon Arlott authored
All the printks had missing level prefixes so I've fixed these too. Also fixed some grammer errors. Signed-off-by:
Simon Arlott <simon@fire.lp0.eu> Signed-off-by:
-
Trent Piepho authored
If cx88 support is compiled into the kernel while vp3054 is left as a module, the kernel will fail to link. Adjust the existing "#if" code in cx88 so that it won't consider vp3054 to be supported in this case. It might make sense to move vp3054 selection into the "customisation" menu instead of a cx88 sub-option (though this is a cx88 feature, there is no extra chip involved). It might also make sense to use dvb_attach() to load vp3054 support. Signed-off-by:
-
Mauro Carvalho Chehab authored
This driver were made based on tea5761 specs. Signed-off-by: -
Maciej W. Rozycki authored
This is a reimplementation of the zs driver for the serial subsystem. Any resemblance to the old driver is purely coincidential. ;-) I do hope I got the handling of modem lines right -- better do not tackle me about the issue unless you feel too good... Any users of the old driver: please note the numbers of the serial lines have now been swapped, i.e. ttyS0 <-> ttyS1 and ttyS2 <-> ttyS3. It has to do with the modem lines mentioned above; basically the port A in a given chip has to be initialised before the port B if you want to use the latter as the serial console (which is usually the case), as operations on modem lines of the serial line associated with the port B access both ports (see the comment at the top of the driver for the details of wiring used). Please update your scripts. This is also the reason each SCC now requests an IRQ once only (as seen in "/proc/interrupts") -- the handler takes care of both ports at once as the line associated with the port B has to take status update interrupts from both ports (and yet the line of the port A takes its own for itself too). The old driver never got it right... Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Yinghai Lu authored
early_serial_setup was removed from serial.h, but forgot to put in serial_8250.h Signed-off-by:
Yinghai Lu <yinghai.lu@sun.com> Signed-off-by:
-
Arnd Bergmann authored
We can't show the extra logo from boot code if FB is built as a module. Make the FB_LOGO_EXTRA depend on FB=y. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Jesper Juhl authored
If, in dm_create_persistent(), the call to create_singlethread_workqueue() fails then we'll return without freeing the memory allocated to 'ps', thus leaking sizeof(struct pstore) bytes. This patch fixes the leak. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com Acked-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Paul Mundt authored
With the slab zeroing allocations cleanups Christoph stubbed in a generic kzalloc(), which was missed on SLOB. Follow the SLAB/SLUB changes and kill off the __kzalloc() wrapper that SLOB was using. Reported-by:
Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
- 17 Jul, 2007 1 commit
-
-
Linus Torvalds authored
The old IDE driver is not ready to take generic SCSI commands, even if it uses them for some specific issues (ie the tray open/close ioctls for IDE CD-ROM's). Pointed out by Bartlomiej. I'm sure we'll have it fixed properly soon enough, but for now we should not allow it to cause problems. Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
