These were left out from the board file when merging these drivers,
add them here.

Call GPIO init from the board file as well, since the platform device init
code uses the GPIO API.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Mistral-specific:

  - Add PWL-driven LCD backlight device

  - Apply power to the board even when the LCD isn't configured; things
    like EEPROM, temperature sensor, and wakeup switch depend on it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add omap osk defconfig
Signed-off-by: Tony Lindgren <tony@atomide.com>

Update omap h2 defconfig
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch syncs omap board specific files with linux-omap tree.

Patch consists mostly of driver updates done in linux-omap
tree for drivers not yet in mainline kernel.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This adds basic support for Siemens SX1. More patches are available,
with video driver, mixer, and serial ports working. That is enough to
do gsm calls with right userland.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds board file and necessary includes for Palm Tungsten|T.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add palmte board config bits for TSC2102 controlled devices. This will
enable touchscreen, audio and APM code to report battery level.

If there are other boards at some point that use a TSC2102, similar
code can be used.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Palmz71 specific things - board file.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This adds support for the keypad on the top of the Amstrad Delta. It's
just a standard omap-keypad so all we need to do is add the keypad
layout and platform data to the board definition file.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Tony Lindgren <tony@atomide.com>

General update of the board file for Palm Tungsten E. Registers the
platform devices contained in the PDA (ROM chip, keypad, infra-red)
and updates the configuration for USB and MMC, whose config values
were previously guessed in most cases due to lack of documentation
(and now are confirmed by a number of users). Macros for GPIO pins are
moved to a file in include/asm-arm/arch-omap.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Bugfixes for the OSK led support:

 - Fix Kconfig merge glitches:  Mistral handles idle and timer leds just fine
 - Fix pm_suspend() runtime botch:  can't sleep, so can't touch tps65010 leds

Improvements:
 - Switch sense of Mistral idle led, so idle == off

Probably the TPS65010 leds should be handled only by the "new led" API.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove the OMAP1 version of omap_dm_timer_get_fclk(), and its associated
compile-time warning.  It would only BUG() if called, while it's only
called on OMAP2.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The SoSSI driver should already take care of this by enabling / disabling
its clock when necessary, so this legacy callout from the PM idle code
is not needed any more.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is needed, so that disabling the SoSSI clock during idle can
be prevented.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Support the camera connector on the OSK Mistral add-on board:

  - define muxing for both camera controllers
  - mux both of them for Mistral
  - teach ov9640 glue about mistral powerup/powerdown
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch enables some clock on omap310.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix GCC-reported compile time bug which prevents booting
when the framebuffer code is disabled.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Somehow this got lost in a merge ...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Partial fix for CONFIG_LEDS breakage ... at least allow platforms
using the debug-leds support (H4 for now) to build with the generic
LED support, and default the LED that would be the timer LED to
trigger using the "heartbeat" (timer driven, rate depends on load).

Right now only H2 and P2 seem to have working LED support; this
at least makes H4 less broken.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Clocks with the follow parent rate mode were not updating their
children at propagate rate time.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

- in addition to fixed FB regions - as passed by the bootloader -
  allow dynamic allocations
- do some more checking against overlapping / reserved regions
- move the FB specific parts out from sram.c to fb.c
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch syncs framebuffer headers with N800 tree.
Signed-off-by: Kai Svahn <kai.svahn@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Mostly cosmetic to sync up with linux-omap tree
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix gpmc header
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds a generic mailbox interface for for DSP and IVA
(Image Video Accelerator). This patch itself doesn't contain
any IVA driver.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch syncs omap specific core code with linux-omap.
Most of the changes are needed to fix bitrot caused by
driver updates in linux-omap tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch syncs omap specific headers with linux-omap.
Most of the changes needed because of bitrot caused by
driver changes in linux-omap tree. Integrating this
is needed for adding support for various omap drivers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This adds generic support for the "debug board" LEDs used by most of
TI's OMAP reference boards, and board-specific support for the H4.

It's derived from the not-as-generic stuff used by OMAP1 H2/H3/P2.
Those should be able to switch easily to this version, and clean up
some of the omap1-specific code.

In addition to H4 support, one key improvement is supporting not just
the "old" ARM debug LED API (with timer and idle LEDs, plus four that
can be handy for kernel debugging), but it also supports the "new"
generic LED API (most useful for usermode stuff IMO).  Either or both
APIs can be enabled.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add controller platform data
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Useful for debugging power management code.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add DMA IRQ sanity checks
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Minor GPIO cleanups:  remove needless #include, and omap_gpio_init()
should be __init, as well as all the board init code calling it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] update memory attribute aliasing documentation & test cases
  [IA64] fail mmaps that span areas with incompatible attributes
  [IA64] allow WB /sys/.../legacy_mem mmaps
  [IA64] make ioremap avoid unsupported attributes
  [IA64] rename ioremap variables to match i386
  [IA64] relax per-cpu TLB requirement to DTC
  [IA64] remove per-cpu ia64_phys_stacked_size_p8
  [IA64] Fix example error injection program
  [IA64] Itanium MC Error Injection Tool: pal_mc_error_inject() interface
  [IA64] Itanium MC Error Injection Tool: Makefile changes
  [IA64] Itanium MC Error Injection Tool: Driver sysfs interface
  [IA64] Itanium MC Error Injection Tool: Doc and sample application
  [IA64] Itanium MC Error Injection Tool: Kernel configuration

* 'server-cluster-locking-api' of git://linux-nfs.org/~bfields/linux:
  gfs2: nfs lock support for gfs2
  lockd: add code to handle deferred lock requests
  lockd: always preallocate block in nlmsvc_lock()
  lockd: handle test_lock deferrals
  lockd: pass cookie in nlmsvc_testlock
  lockd: handle fl_grant callbacks
  lockd: save lock state on deferral
  locks: add fl_grant callback for asynchronous lock return
  nfsd4: Convert NFSv4 to new lock interface
  locks: add lock cancel command
  locks: allow {vfs,posix}_lock_file to return conflicting lock
  locks: factor out generic/filesystem switch from setlock code
  locks: factor out generic/filesystem switch from test_lock
  locks: give posix_test_lock same interface as ->lock
  locks: make ->lock release private data before returning in GETLK case
  locks: create posix-to-flock helper functions
  locks: trivial removal of unnecessary parentheses

The newly merged SLUB allocator patches had been generated before the
removal of "struct subsystem", and ended up applying fine, but wouldn't
build based on the current tree as a result.

Fix up that merge error - not that SLUB is likely really ready for
showtime yet, but at least I can fix the trivial stuff.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (34 commits)
  [GFS2] Uncomment sprintf_symbol calling code
  [DLM] lowcomms style
  [GFS2] printk warning fixes
  [GFS2] Patch to fix mmap of stuffed files
  [GFS2] use lib/parser for parsing mount options
  [DLM] Lowcomms nodeid range & initialisation fixes
  [DLM] Fix dlm_lowcoms_stop hang
  [DLM] fix mode munging
  [GFS2] lockdump improvements
  [GFS2] Patch to detect corrupt number of dir entries in leaf and/or inode blocks
  [GFS2] bz 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump)
  [DLM] fs/dlm/ast.c should #include "ast.h"
  [DLM] Consolidate transport protocols
  [DLM] Remove redundant assignment
  [GFS2] Fix bz 234168 (ignoring rgrp flags)
  [DLM] change lkid format
  [DLM] interface for purge (2/2)
  [DLM] add orphan purging code (1/2)
  [DLM] split create_message function
  [GFS2] Set drop_count to 0 (off) by default
  ...

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Add 965GM pci id update
  drm: just use io_remap_pfn_range on all archs..
  drm: fix DRM_CONSISTENT mapping
  drm: fix up mmap locking in preparation for ttm changes
  drm: fix driver deadlock with AIGLX and reclaim_buffers_locked
  drm: fix warning in drm_fops.c
  drm: allow for more generic drm ioctls
  drm: fix alpha domain handling
  via: fix CX700 pci id
  drm: make drm_io_prot static.
  drm: remove via_mm.h
  drm: add missing NULL assignment
  drm/radeon: Fix u32 overflows when determining AGP base address in card space.
  drm: port over use_vmalloc code from git hashtab
  drm: fix crash with fops lock and fixup sarea/page size locking
  drm: bring bufs code from git tree.
  drm: move protection stuff into separate function
  drm: Use ARRAY_SIZE macro when appropriate
  drm: update README.drm (bugzilla #7933)
  drm: remove unused exports

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: rfkill: add support for input key to control wireless radio
  [NET] net/core: Fix error handling
  [TG3]: Update version and reldate.
  [TG3]: Eliminate spurious interrupts.
  [TG3]: Add ASPM workaround.
  [Bluetooth] Correct SCO buffer for another Broadcom based dongle
  [Bluetooth] Add support for Targus ACB10US USB dongle
  [Bluetooth] Disconnect L2CAP connection after last RFCOMM DLC
  [Bluetooth] Check that device is in rfcomm_dev_list before deleting
  [Bluetooth] Use in-kernel sockets API
  [Bluetooth] Attach host adapters to the Bluetooth bus
  [Bluetooth] Fix L2CAP and HCI setsockopt() information leaks